From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n4JAV1f1024347 for ; Tue, 19 May 2009 06:31:01 -0400 Received: from yw-out-2324.google.com (yw-out-2324.google.com [74.125.46.30]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id n4JAToCV028349 for ; Tue, 19 May 2009 06:29:50 -0400 Received: by yw-out-2324.google.com with SMTP id 3so2727146ywj.81 for ; Tue, 19 May 2009 03:29:50 -0700 (PDT) Message-ID: <4A128A19.40601@gmail.com> Date: Tue, 19 May 2009 12:29:45 +0200 From: Antonio Beamud Montero MIME-Version: 1.0 To: Linux and Kernel Video Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Hauppauge HVR 1110 and DVB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: I have a new hauppauge hvr 1110. Trying to load the lastest modules, all seems to load fine, but no dvb-t frontend is created. As I can see this card isn't exactly the same hvr 1110 (hvr 1110r3) supported by v4l-dvb. The system reports the next info: # lspci -v 0b:03.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) Subsystem: Hauppauge computer works Inc. Unknown device 6707 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- GSI 160 (level, low) -> IRQ 65 saa7133[0]: found at 0000:0f:03.0, rev: 209, irq: 65, latency: 32, mmio: 0xfc4ff800 saa7133[0]: subsystem: 0070:6707, board: Hauppauge WinTV-HVR1110r3 [card=156,autodetected] saa7133[0]: board init: gpio is 40000 saa7133[0]: i2c eeprom 00: 70 00 07 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 b0 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 06 32 97 04 00 20 00 ff ff ff saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 08 79 5e f0 73 05 29 00 saa7133[0]: i2c eeprom 90: 84 08 00 06 89 06 01 00 95 19 8d 72 07 70 73 09 saa7133[0]: i2c eeprom a0: 23 5f 73 0a f4 9b 72 0b 2f 72 0e 01 72 0f 01 72 saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 73 13 a2 69 79 1a 00 00 00 00 00 saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 0-0050: Hauppauge model 67209, rev C1F5, serial# 6191368 tveeprom 0-0050: MAC address is 00-0D-FE-5E-79-08 tveeprom 0-0050: tuner model is NXP 18271C2 (idx 155, type 54) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 0-0050: audio processor is SAA7131 (idx 41) tveeprom 0-0050: decoder processor is SAA7131 (idx 35) tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter saa7133[0]: hauppauge eeprom: model=67209 tuner 0-004b: chip found @ 0x96 (saa7133[0]) tda829x 0-004b: setting tuner address to 60 tda18271 0-0060: creating new instance TDA18271HD/C2 detected @ 0-0060 tda18271: performing RF tracking filter calibration tda18271: RF tracking filter calibration complete tda829x 0-004b: type set to tda8290+18271 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xfc4ff800 irq 65 registered as card -1 Trying to load manually the saa7134-dvb module reports nothing. The module seems to recognize the 67209LF rev C1F5 ok. Hauppauge hvr 1110 Hardware Info: Decoder: saa7131E/03/G Module: TDA10048HN (http://www.ecnasiamag.com/article-10192-philipstda10048hnenablesdigitaltvviewingthroughentertainmentdevices-Asia.html) Greetings -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list