From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from [195.7.61.12] ([195.7.61.12]:44622 "EHLO killala.koala.ie" rhost-flags-FAIL-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1754852AbZETOFv (ORCPT ); Wed, 20 May 2009 10:05:51 -0400 Message-ID: <4A140936.6020001@koala.ie> Date: Wed, 20 May 2009 14:44:22 +0100 From: Simon Kenyon MIME-Version: 1.0 To: linux-media@vger.kernel.org CC: liplianin@me.by Subject: Re: [linux-dvb] SDMC DM1105N not being detected References: In-Reply-To: Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: mp3geek wrote: > Not even being detected in Linux 2.6.29.1, I have the modules "dm1105" > loaded, but since its not even being detected by linux.. > > lspci -vv shows this (I'm assuming this is the card..), dmesg shows > nothing dvb being loaded > > 00:0b.0 Ethernet controller: Device 195d:1105 (rev 10) > Subsystem: Device 195d:1105 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 30 (4000ns min, 8000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at 9400 [size=256] > > > The chip says the following, SDMC DM1105N, EasyTV-DVBS V1.0B > (2008-04-26), 0735 E280034 > because i saw that there was a driver written by igor, i took a chance and bought a DM04 DVB-S card on ebay. it only cost €20 (including shipping from HK to Ireland) so i reckoned "nothing ventured, nothing gained" on a windows box it runs rather nicely. granted that the software provided does not provide a BDA driver, so you are pretty much limited to the stuff that comes with the card. but a big "me too" on linux (which is what i bought it for) i similarly get an "ethernet controller" and nothing in the kernel log when i load the dm1105 module. what do i need to do to debug the situation and/or update the driver? regards -- simon