From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-fx0-f158.google.com ([209.85.220.158]:55563 "EHLO mail-fx0-f158.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753010AbZEUON1 (ORCPT ); Thu, 21 May 2009 10:13:27 -0400 Received: by fxm2 with SMTP id 2so1063534fxm.37 for ; Thu, 21 May 2009 07:13:27 -0700 (PDT) Message-ID: <4A156184.1070501@gmail.com> Date: Thu, 21 May 2009 16:13:24 +0200 From: Antonio Beamud Montero MIME-Version: 1.0 To: Michael Krufky CC: Linux and Kernel Video , linux-media Subject: Re: Hauppauge HVR 1110 and DVB References: <4A128A19.40601@gmail.com> <37219a840905200608q42b4fc0fife8f9aad7056145b@mail.gmail.com> <4A1424F8.9010706@gmail.com> <37219a840905201219x576fe229g6d95f1cf7dc80a08@mail.gmail.com> In-Reply-To: <37219a840905201219x576fe229g6d95f1cf7dc80a08@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: Michael Krufky escribió: > On Wed, May 20, 2009 at 11:42 AM, Antonio Beamud Montero > wrote: > >> Michael Krufky escribió: >> >>> On Tue, May 19, 2009 at 6:29 AM, Antonio Beamud Montero >>> Hello, >>> >>> I specifically left out the DVB support for this device. >>> >>> To be honest, I didn't know that this board was available for purchase >>> already. Where did you get it? (just curious) >>> >>> >> It seems that here in spain is available :) >> >> >> >>> If something happens sooner than that, I'll append another email to this >>> thread. >>> >>> >> Ok, If you need a tester, I'm your man ;) >> >> Thank you. >> >> Greetings. >> > > (i am sending this a second time -- first message got rejected by vger) > > You're in luck -- I resolved the problem today... If you'd like to > test, please try out this repository: > > http://kernellabs.com/hg/~mk/hvr1110 > > Please let me know how this works for you. > > Thanks for the patch. Seems to load fine, the problem arises when try load the firmware. -------- saa7133[0]: found at 0000:0f:03.0, rev: 209, irq: 65, latency: 32, mmio: 0xfc4ff800 saa7133[0]: subsystem: 0070:6707, board: Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [card=156,autodetected] saa7133[0]: board init: gpio is 440100 tuner 0-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 70 00 07 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 b0 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 06 32 97 04 00 20 00 ff ff ff saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 08 79 5e f0 73 05 29 00 saa7133[0]: i2c eeprom 90: 84 08 00 06 89 06 01 00 95 19 8d 72 07 70 73 09 saa7133[0]: i2c eeprom a0: 23 5f 73 0a f4 9b 72 0b 2f 72 0e 01 72 0f 01 72 saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 73 13 a2 69 79 1a 00 00 00 00 00 saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 0-0050: Hauppauge model 67209, rev C1F5, serial# 6191368 tveeprom 0-0050: MAC address is 00-0D-FE-5E-79-08 tveeprom 0-0050: tuner model is NXP 18271C2 (idx 155, type 54) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 0-0050: audio processor is SAA7131 (idx 41) tveeprom 0-0050: decoder processor is SAA7131 (idx 35) tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter saa7133[0]: hauppauge eeprom: model=67209 tda829x 0-004b: setting tuner address to 60 tda18271 0-0060: creating new instance TDA18271HD/C2 detected @ 0-0060 tda18271: performing RF tracking filter calibration tda18271: RF tracking filter calibration complete tda829x 0-004b: type set to tda8290+18271 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 dvb_init() allocating 1 frontend tda829x 0-004b: type set to tda8290 tda18271 0-0060: attaching existing instance DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... tda10048_firmware_upload: firmware read 24878 bytes. tda10048_firmware_upload: firmware uploading tda10048_firmware_upload: firmware upload failed saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xfc4ff800 irq 65 registered as card -1 --- I've tried to extract the firmware from the windows drivers, but all my experiments failed. How I can get the correct firmware? Thanks for all again.