From: Andreas Besse <operator@handshake.de>
To: linux-media@vger.kernel.org
Subject: cannot rmmod stb0899
Date: Sat, 23 May 2009 16:47:13 +0200 [thread overview]
Message-ID: <4A180C71.1080109@handshake.de> (raw)
Hello,
I'm using a KNC One TV-Station DVB-S2 Plus and a WinTV-NOVA-CI PCI with
the multiprotocol drivers from http://www.jusst.de/hg/multiproto/
(changeset: 7218:2a911b8f9910, date: Wed Jul 09 23:07:29 2008 +0400)
The drivers run fine since 250 (!) days, but I have an issue with high
cpu load. So I decited to apply the patch "Fix High CPU load in 'top'
due to budget_av slot polling" from Oliver Endriss or try the current
v4l tree.
First i tried to remove the current drivers. If i call "rmmod stb0899"
the driver is not removed. Instead an Error "ERROR: Module stb0899 is in
use" is shown (but no application is using the device)
I also tried "rmmod -w stb0899". This leads to an infinite loop and I'm
not able to kill the process.
How can I rmmod the stb0899 driver without rebooting the system?
How can I kill "rmmod -w stb0899"?
regards,
Andreas Besse
===============================================
output of lsmod:
...
tsdev 7968 0
budget_av 24192 1
saa7146_vv 45152 2 budget_av
videobuf_dma_sg 12996 1 saa7146_vv
videobuf_core 17252 2 saa7146_vv,videobuf_dma_sg
videodev 26528 2 saa7146_vv
v4l2_common 17216 2 saa7146_vv,videodev
v4l1_compat 12516 2 saa7146_vv,videodev
firmware_class 9504 2 budget_ci,budget_av
budget_core 10756 2 budget_ci,budget_av
dvb_core 79900 4 budget_ci,stv0299,budget_av,budget_core
saa7146 18248 4 budget_ci,budget_av,saa7146_vv,budget_core
ttpci_eeprom 2432 1 budget_core
ide_cd 36416 0
cdrom 32832 1 ide_cd
rtc 12856 0
pcspkr 3104 0
intel_agp 23188 1
i2c_i801 8656 0
i2c_core 23552 10
budget_ci,stv0299,i2c_isa,tda8261,stb0899,budget_av,v4l2_common,budget_core,ttpci_eeprom,i2c_i801
===============================================
output of "make rmmod" in multiprotocol directory:
Mail:~/pakete/multiproto# make rmmod
make -C /root/pakete/multiproto/v4l rmmod
make[1]: Entering directory `/root/pakete/multiproto/v4l'
scripts/rmmod.pl unload
found 230 modules
/sbin/rmmod budget_av
ERROR: Module budget_av is in use
/sbin/rmmod budget_ci
/sbin/rmmod saa7146_vv
ERROR: Module saa7146_vv is in use by budget_av
/sbin/rmmod videodev
ERROR: Module videodev is in use by saa7146_vv
/sbin/rmmod budget_core
ERROR: Module budget_core is in use by budget_av
/sbin/rmmod stv0299
/sbin/rmmod videobuf_dma_sg
ERROR: Module videobuf_dma_sg is in use by saa7146_vv
/sbin/rmmod stb0899
ERROR: Module stb0899 is in use
/sbin/rmmod v4l1_compat
ERROR: Module v4l1_compat is in use by saa7146_vv,videodev
/sbin/rmmod dvb_core
ERROR: Module dvb_core is in use by budget_av,budget_core
/sbin/rmmod tda8261
ERROR: Module tda8261 is in use
/sbin/rmmod v4l2_common
ERROR: Module v4l2_common is in use by saa7146_vv,videodev
/sbin/rmmod videobuf_core
ERROR: Module videobuf_core is in use by saa7146_vv,videobuf_dma_sg
/sbin/rmmod ir_common
/sbin/rmmod saa7146
ERROR: Module saa7146 is in use by budget_av,saa7146_vv,budget_core
/sbin/rmmod ttpci_eeprom
ERROR: Module ttpci_eeprom is in use by budget_core
/sbin/rmmod budget_av
ERROR: Module budget_av is in use
/sbin/rmmod saa7146_vv
ERROR: Module saa7146_vv is in use by budget_av
/sbin/rmmod videodev
ERROR: Module videodev is in use by saa7146_vv
/sbin/rmmod budget_core
ERROR: Module budget_core is in use by budget_av
/sbin/rmmod videobuf_dma_sg
ERROR: Module videobuf_dma_sg is in use by saa7146_vv
/sbin/rmmod stb0899
ERROR: Module stb0899 is in use
/sbin/rmmod v4l1_compat
ERROR: Module v4l1_compat is in use by saa7146_vv,videodev
/sbin/rmmod dvb_core
ERROR: Module dvb_core is in use by budget_av,budget_core
/sbin/rmmod tda8261
ERROR: Module tda8261 is in use
/sbin/rmmod v4l2_common
ERROR: Module v4l2_common is in use by saa7146_vv,videodev
/sbin/rmmod videobuf_core
ERROR: Module videobuf_core is in use by saa7146_vv,videobuf_dma_sg
/sbin/rmmod saa7146
ERROR: Module saa7146 is in use by budget_av,saa7146_vv,budget_core
/sbin/rmmod ttpci_eeprom
ERROR: Module ttpci_eeprom is in use by budget_core
Couldn't unload: ttpci_eeprom saa7146 videobuf_core v4l2_common tda8261
dvb_core v4l1_compat stb0899 videobuf_dma_sg budget_core videodev
saa7146_vv budget_av
make[1]: Leaving directory `/root/pakete/multiproto/v4l'
===============================================
lsmod after "make rmmod"
budget_av 24192 1
saa7146_vv 45152 2 budget_av
videobuf_dma_sg 12996 1 saa7146_vv
videobuf_core 17252 2 saa7146_vv,videobuf_dma_sg
videodev 26528 2 saa7146_vv
v4l2_common 17216 2 saa7146_vv,videodev
v4l1_compat 12516 2 saa7146_vv,videodev
firmware_class 9504 1 budget_av
budget_core 10756 1 budget_av
dvb_core 79900 2 budget_av,budget_core
saa7146 18248 3 budget_av,saa7146_vv,budget_core
ttpci_eeprom 2432 1 budget_core
ide_cd 36416 0
cdrom 32832 1 ide_cd
rtc 12856 0
pcspkr 3104 0
intel_agp 23188 1
i2c_i801 8656 0
i2c_core 23552 8
i2c_isa,tda8261,stb0899,budget_av,v4l2_common,budget_core,ttpci_eeprom,i2c_i801
===============================================
lspci:
0000:02:04.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: KNC One: Unknown device 0018
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at ec049000 (32-bit, non-prefetchable) [size=512]
0000:02:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget /
Hauppauge WinTV-NOVA-CI DVB card
Flags: medium devsel, IRQ 16
Memory at ec04a000 (32-bit, non-prefetchable) [size=512]
next reply other threads:[~2009-05-23 15:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-23 14:47 Andreas Besse [this message]
2009-05-25 2:47 ` Re : cannot rmmod stb0899 Manu
2009-05-25 17:29 ` Andreas Besse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A180C71.1080109@handshake.de \
--to=operator@handshake.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox