From: David <david@unsolicited.net>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>,
linux-media@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
dbrownell@users.sourceforge.net, leonidv11@gmail.com,
Greg KH <gregkh@suse.de>,
Andrew Morton <akpm@linux-foundation.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: Re: USB/DVB - Old Technotrend TT-connect S-2400 regression tracked down
Date: Sat, 23 May 2009 20:22:07 +0100 [thread overview]
Message-ID: <4A184CDF.1020901@unsolicited.net> (raw)
In-Reply-To: <4A183E5E.1070502@unsolicited.net>
Again, hopefully with word wrap sorted out...
Media PC (32-bit - Nvidia chipset. kernel 2.6.27)
19:13:18 s kernel: usb 1-3: new high speed USB device using ehci_hcd and address 6
19:13:18 s kernel: usb 1-3: configuration #1 chosen from 1 choice
19:13:18 s kernel: dvb-usb: found a 'Technotrend TT-connect S-2400' in cold state, will try to load a firmware
19:13:18 s kernel: firmware: requesting dvb-usb-tt-s2400-01.fw
19:13:18 s kernel: dvb-usb: downloading firmware from file 'dvb-usb-tt-s2400-01.fw'
19:13:18 s kernel: usb 1-3: USB disconnect, address 6
19:13:18 s kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
19:13:20 s kernel: usb 1-3: new high speed USB device using ehci_hcd and address 7
19:13:20 s kernel: usb 1-3: configuration #1 chosen from 1 choice
19:13:20 s kernel: dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
19:13:20 s kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
19:13:20 s kernel: DVB: registering new adapter (Technotrend TT-connect S-2400)
19:13:20 s kernel: DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
19:13:23 s kernel: dvb-usb: recv bulk message failed: -110
19:13:23 s kernel: ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
19:13:23 s kernel: dvb-usb: Technotrend TT-connect S-2400 successfully initialized and connected.
The device times out. Reverting b963801164618e25fbdc0cd452ce49c3628b46c8
causes it to work again
19:09:53 s kernel: usb 1-3: new high speed USB device using ehci_hcd and address 5
19:09:53 s kernel: usb 1-3: configuration #1 chosen from 1 choice
19:09:58 s kernel: dvb-usb: found a 'Technotrend TT-connect S-2400' in cold state, will try to load a firmware
19:09:58 s kernel: firmware: requesting dvb-usb-tt-s2400-01.fw
19:09:59 s kernel: dvb-usb: downloading firmware from file 'dvb-usb-tt-s2400-01.fw'
19:09:59 s kernel: usb 1-3: USB disconnect, address 5
19:09:59 s kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
19:09:59 s kernel: usbcore: registered new interface driver dvb_usb_ttusb2
19:10:00 s kernel: usb 1-3: new high speed USB device using ehci_hcd and address 6
19:10:00 s kernel: usb 1-3: configuration #1 chosen from 1 choice
19:10:01 s kernel: dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
19:10:01 s kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
19:10:01 s kernel: DVB: registering new adapter (Technotrend TT-connect S-2400)
19:10:01 s kernel: DVB: registering frontend 3 (Philips TDA10086 DVB-S)...
19:10:01 s kernel: dvb-usb: Technotrend TT-connect S-2400 successfully initialized and connected.
My PC (64 bit - ATI chipset, using 2.6.30-rc5)
[12044.364021] usb 4-10: new high speed USB device using ehci_hcd and address 5
[12044.497561] usb 4-10: configuration #1 chosen from 1 choice
[12044.881621] dvb-usb: found a 'Technotrend TT-connect S-2400' in cold state, will try to load a firmware
[12044.881626] usb 4-10: firmware: requesting dvb-usb-tt-s2400-01.fw
[12044.918854] dvb-usb: downloading firmware from file 'dvb-usb-tt-s2400-01.fw'
[12044.980719] usbcore: registered new interface driver dvb_usb_ttusb2
[12044.981478] usb 4-10: USB disconnect, address 5
[12044.985169] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[12046.744023] usb 4-10: new high speed USB device using ehci_hcd and address 6
[12046.876980] usb 4-10: configuration #1 chosen from 1 choice
[12046.877673] dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
[12046.878601] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[12046.878959] DVB: registering new adapter (Technotrend TT-connect S-2400)
[12046.886861] DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
[12046.891434] LNBx2x attached on addr=8<3>dvb-usb: recv bulk message failed: -110
[12048.888080] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
[12048.888320] dvb-usb: Technotrend TT-connect S-2400 successfully initialized and connected.
Reverting b963801164618e25fbdc0cd452ce49c3628b46c8 (manually, as there
are conflicting changes) causes it to work again. The wierd random
frontend number looks strange though.
[ 2406.492027] usb 2-10: new high speed USB device using ehci_hcd and address 7
[ 2406.625622] usb 2-10: configuration #1 chosen from 1 choice
[ 2406.626328] dvb-usb: found a 'Technotrend TT-connect S-2400' in cold state, will try to load a firmware
[ 2406.626335] usb 2-10: firmware: requesting dvb-usb-tt-s2400-01.fw
[ 2406.628650] dvb-usb: downloading firmware from file 'dvb-usb-tt-s2400-01.fw'
[ 2406.690868] usb 2-10: USB disconnect, address 7
[ 2406.693282] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 2408.453024] usb 2-10: new high speed USB device using ehci_hcd and address 8
[ 2408.585983] usb 2-10: configuration #1 chosen from 1 choice
[ 2408.586652] dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
[ 2408.587727] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2408.588080] DVB: registering new adapter (Technotrend TT-connect S-2400)
[ 2408.591575] DVB: registering adapter 0 frontend 42056112 (Philips TDA10086 DVB-S)...
[ 2408.595941] LNBx2x attached on addr=8<6>dvb-usb: Technotrend TT-connect S-2400 successfully initialized and connected.
next prev parent reply other threads:[~2009-05-23 19:25 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-22 21:32 USB/DVB - Old Technotrend TT-connect S-2400 regression tracked down David
2009-05-22 21:45 ` David
2009-05-23 8:25 ` Pekka Enberg
2009-05-23 15:15 ` Alan Stern
2009-05-23 18:20 ` David
2009-05-23 19:22 ` David [this message]
2009-05-23 21:02 ` Alan Stern
2009-05-24 0:15 ` David
2009-05-24 0:54 ` hermann pitton
2009-05-24 8:35 ` David
2009-05-24 14:33 ` Alan Stern
2009-05-24 15:28 ` David
2009-05-25 2:10 ` Alan Stern
2009-05-25 2:39 ` Pete Zaitcev
2009-05-25 9:00 ` David
2009-05-25 12:25 ` David
2009-05-26 0:48 ` Pete Zaitcev
2009-05-26 14:08 ` Alan Stern
2009-05-26 18:42 ` David
2009-05-26 19:01 ` Pete Zaitcev
2009-05-24 15:16 ` Alan Stern
2009-05-25 15:23 ` Alan Stern
2009-05-25 17:32 ` David
2009-05-25 18:44 ` David
2009-05-25 21:12 ` Alan Stern
2009-05-26 20:57 ` Alan Stern
2009-05-27 18:42 ` David
2009-05-27 20:20 ` Alan Stern
2009-05-27 21:28 ` David
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A184CDF.1020901@unsolicited.net \
--to=david@unsolicited.net \
--cc=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=gregkh@suse.de \
--cc=leonidv11@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=penberg@cs.helsinki.fi \
--cc=rjw@sisk.pl \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox