Re: [linux-dvb] SDMC DM1105N not being detected

[Simon Kenyon <simon@koala.ie>]

Igor M. Liplianin wrote:
> The card is working with external LNB power supply, for example, through the loop out from another 
> sat box. So, we need to know, which way to control LNB power on the board. Usually it is through 
> GPIO pins.
> For example:
> Pins 112 and 111 for GPIO0, GPIO1. Also GPIO15 is at 65 pin.
> You can edit this lines in code:
> -*-*-*-*-*-*-*-*-*-*-*-*-
> /* GPIO's for LNB power control for Axess DM05 */
> #define DM05_LNB_MASK                           0xfffffffc  // GPIO control
> #define DM05_LNB_13V                            0x3fffd // GPIO value
> #define DM05_LNB_18V                            0x3fffc // GPIO value
> -*-*-*-*-*-*-*-*-*-*-*-*-
>
> BTW:
> Bit value 0 for GPIOCTL means output, 1 - input.
> Bit value for GPIOVAL - read/write.
> GPIO pins count is 18. Bits over 18 affect nothing.
>   
i will try to work out the correct values
when i have done so (or given up trying) i will let you know

thank you very much for your help
--
simon