From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.imap4all.com ([213.201.213.161]:4656 "EHLO smtp.imap4all.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754067AbZE3MDI (ORCPT ); Sat, 30 May 2009 08:03:08 -0400 Received: from IO.local (4-167.105-92.cust.bluewin.ch [92.105.167.4]) by smtp.imap4all.com (Postfix) with ESMTP id E096A835094 for ; Sat, 30 May 2009 13:32:07 +0200 (CEST) Message-ID: <4A211934.3010109@deckpoint.ch> Date: Sat, 30 May 2009 13:32:04 +0200 From: Thomas Kernen MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Mystique SaTiX DVB-S2 & s2-liplianin & Ubuntu 9.04 64 bit - modules load but tuning not successful Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Dear team, I'm installing a Mystique SaTiX DVB-S2 PCI card (apparently an OEM version of KNC DVB Station S2) in a box running Ubuntu 9.04 64bit. (2.6.28-11-server #42-Ubuntu SMP Fri Apr 17 02:45:36 UTC 2009 x86_64 GNU/Linux) I've pulled the latest s2-liplianin code from: http://mercurial.intuxication.org/hg/s2-liplianin I was able to compile and the modules do load, but I don't seem to be able to tune to anything. Note that I've only tried to tune to DVB-S transponders for now. lspci -vvv shows the following: 11:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: KNC One Device 0019 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- GSI 23 (level, low) -> IRQ 23 [ 9.796972] saa7146: found saa7146 @ mem ffffc20001186000 (revision 1, irq 23) (0x1894,0x0019). [ 9.796976] saa7146 (0): dma buffer size 192512 [ 9.796977] DVB: registering new adapter (KNC1 DVB-S2) [ 9.853417] adapter failed MAC signature check [ 9.853419] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 10.162850] KNC1-1: MAC addr = 00:09:d6:65:2d:91 [ 10.300005] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 10.424422] stb0899_attach: Attaching STB0899 [ 10.432541] tda8261_attach: Attaching TDA8261 8PSK/QPSK tuner [ 10.432543] DVB: registering adapter 1 frontend 0 (STB0899 Multistandard)... [ 10.432731] budget-av: ci interface initialised. dvbsnoop shows the following: dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ --------------------------------------------------------- FrontEnd Info... --------------------------------------------------------- Device: /dev/dvb/adapter1/frontend0 Basic capabilities: Name: "STB0899 Multistandard" Frontend-type: QPSK (DVB-S) Frequency (min): 950.000 MHz Frequency (max): 2150.000 MHz Frequency stepsiz: 0.000 MHz Frequency tolerance: 0.000 MHz Symbol rate (min): 1.000000 MSym/s Symbol rate (max): 45.000000 MSym/s Symbol rate tolerance: 0 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC AUTO QPSK Current parameters: Frequency: 1776.000 MHz Inversion: AUTO Symbol rate: 27.500000 MSym/s FEC: FEC AUTO If I try to use scan-s2 I get the following output: API major 5, minor 0 ERROR: Cannot open rotor configuration file 'rotor.conf'. scanning /usr/share/dvb/dvb-s/Astra-19.2E using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' initial transponder DVB-S 12551500 V 22000000 5/6 AUTO AUTO initial transponder DVB-S2 12551500 V 22000000 5/6 AUTO AUTO ----------------------------------> Using DVB-S >>> tune to: 12551:vC56S0:S0.0W:22000: DiSEqC: uncommitted switch pos 0 DiSEqC: e0 10 39 f0 00 00 DiSEqC: switch pos 0, 13V, hiband (index 2) DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1951500 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! >>> tune to: 12551:vC56S0:S0.0W:22000: (tuning failed) DiSEqC: uncommitted switch pos 0 DiSEqC: e0 10 39 f0 00 00 DiSEqC: switch pos 0, 13V, hiband (index 2) DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1951500 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! ----------------------------------> Using DVB-S2 >>> tune to: 12551:vC56S1:S0.0W:22000: DiSEqC: uncommitted switch pos 0 DiSEqC: e0 10 39 f0 00 00 DiSEqC: switch pos 0, 13V, hiband (index 2) DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1951500 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! >>> tune to: 12551:vC56S1:S0.0W:22000: (tuning failed) DiSEqC: uncommitted switch pos 0 DiSEqC: e0 10 39 f0 00 00 DiSEqC: switch pos 0, 13V, hiband (index 2) DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1951500 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Note: Card and sat feed are known the work, I've tested it under Windows without any issues and I have a Skystar 2 in this server that works fine. Any suggestions what may be the issue and how I could solve it? Thanks Thomas