From: Yves Le Feuvre <yves.lefeuvre@inserm.fr>
To: linux-media@vger.kernel.org
Subject: request for help: Asus Europa2 OEM parity error
Date: Fri, 19 Jun 2009 10:01:33 +0200 [thread overview]
Message-ID: <4A3B45DD.8090509@inserm.fr> (raw)
Hi,
As I reported before (i am sorry for insisting, and I understand that
working without the card is not so easy), this card (Asus Europa2 OEM
[card=100,autodetected]) does not work with kernel 2.6.26 and later
(2.6.25 is OK, at least for DVB)
in 2.6.25,
composite input, DVB are working. radio is not working . analog TV
seems to be working (very poor antenna, hard to say)
in 2.6.26 (and later, up to 2.6.30)
composite input is working, DVB is not working (tzap does not lock),
radio is not working (don't remember for analog TV). dmesg warns about
parity error.
any help would be greatly appreciated...
many thanks in advance
Yves
here is what dmesg is saying with i2c_debug=1 and irq_debug=1
______________________________
______________________________
for 2.6.30, with latest v4l-dvb
[root@localhost v4l-dvb]# make unload && make &&make install && dmesg -c
2>&1>/dev/null && modprobe saa7134 i2c_debug=1 irq_debug=1
[root@localhost v4l-dvb]# dmesg
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134[0]: found at 0000:02:03.0, rev: 1, irq: 19, latency: 32, mmio:
0xf9ffe000
saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM
[card=100,autodetected]
saa7134[0]: board init: gpio is 0
IRQ 19/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7134[0]: i2c xfer: < a0 00 >
saa7134[0]: i2c xfer: < a1 =43 =10 =60 =48 =54 =20 =1c =00 =43 =43 =a9
=1c =55 =d2 =b2 =92 =00 =ff =86 =0f =ff =20 =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =01 =40 =01 =03 =03 =02 =03 =04 =08 =ff =00 =4c =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=1d =00 =c2 =86 =10 =01 =01 =0d =01 =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff >
saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-adapter i2c-1: Invalid 7-bit address 0x7a
saa7134[0]: i2c xfer: < 8e ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < e2 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 5a ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 10 07 02 >
saa7134[0]: i2c xfer: < 84 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 86 >
saa7134[0]: i2c xfer: < 86 00 >
saa7134[0]: i2c xfer: < 87 =11 =10 =10 =10 =10 =10 =10 =10 >
saa7134[0]: i2c xfer: < 86 1f >
saa7134[0]: i2c xfer: < 87 =10 >
saa7134[0]: i2c xfer: < 86 2f >
saa7134[0]: i2c xfer: < 87 =10 >
saa7134[0]: i2c xfer: < 86 01 02 >
saa7134[0]: i2c xfer: < 86 00 00 >
saa7134[0]: i2c xfer: < 86 07 >
saa7134[0]: i2c xfer: < 87 =10 >
saa7134[0]: i2c xfer: < 86 00 d6 30 >
tuner 1-0043: chip found @ 0x86 (saa7134[0])
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
saa7134[0]: i2c xfer: < 86 00 c0 00 00 >
saa7134[0]: i2c xfer: < c0 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < c2 >
tuner 1-0061: chip found @ 0xc2 (saa7134[0])
saa7134[0]: i2c xfer: < c2 0b dc 9c 60 >
saa7134[0]: i2c xfer: < c2 0b dc 86 54 >
saa7134[0]: i2c xfer: < c3 =30 >
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
saa7134[0]: i2c xfer: < 86 00 00 00 00 >
saa7134[0]: i2c xfer: < c2 1b 6f 86 52 >
saa7134[0]: i2c xfer: < 86 00 02 00 00 >
saa7134[0]: i2c xfer: < 86 00 00 00 00 >
saa7134[0]: i2c xfer: < c2 1b 6f 86 52 >
saa7134[0]: i2c xfer: < 86 00 00 00 00 >
saa7134[0]: i2c xfer: < c2 1b 6f 86 52 >
saa7134[0]: i2c xfer: < 86 00 20 00 00 >
saa7134[0]: i2c xfer: < c2 9c 60 85 54 >
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134[0]/irq[0,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[1,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[2,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[3,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[4,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[5,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[6,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[7,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[8,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[9,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq[10,4296555620]: r=0x20 s=0x00 PE
saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
saa7134[0]/irq[0,4296555620]: r=0x20 s=0x00 PE
saa7134[0]: i2c xfer: < 86 00 20 00 00 >
saa7134[0]: i2c xfer: < c2 1b 6f 86 52 >
saa7134[0]: i2c xfer: < 86 00 a0 00 00 >
saa7134[0]: i2c xfer: < 86 00 a0 00 00 >
saa7134[0]: i2c xfer: < c2 9c 60 85 54 >
saa7134[0]: i2c xfer: < c2 07 ac 80 19 >
saa7134[0]: i2c xfer: < 86 00 20 00 00 >
saa7134[0]: i2c xfer: < c2 9c 60 85 54 >
saa7134[0]: i2c xfer: < 86 00 20 00 00 >
saa7134[0]: i2c xfer: < c2 1b 6f 86 52 >
dvb_init() allocating 1 frontend
saa7134[0]: i2c xfer: < 10 00 [fe quirk] < 11 =46 >
saa7134[0]: i2c xfer: < 10 07 [fe quirk] < 11 =02 >
saa7134[0]: i2c xfer: < 10 07 02 >
saa7134[0]: i2c xfer: < c3 =70 >
saa7134[0]: i2c xfer: < 10 07 [fe quirk] < 11 =02 >
saa7134[0]: i2c xfer: < 10 07 00 >
tuner-simple 1-0061: attaching existing instance
tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
DVB: registering new adapter (saa7134[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
saa7134[0]: i2c xfer: < 10 07 80 >
saa7134[0]: i2c xfer: < 10 3b [fe quirk] < 11 =ff >
saa7134[0]: i2c xfer: < 10 3b fe >
saa7134[0]: i2c xfer: < 10 2d f0 >
tda1004x: setting up plls for 53MHz sampling clock
saa7134[0]: i2c xfer: < 10 2f 08 >
saa7134[0]: i2c xfer: < 10 30 03 >
saa7134[0]: i2c xfer: < 10 3e 67 >
saa7134[0]: i2c xfer: < 10 4d d7 >
saa7134[0]: i2c xfer: < 10 4e 3f >
saa7134[0]: i2c xfer: < 10 31 5c >
saa7134[0]: i2c xfer: < 10 32 32 >
saa7134[0]: i2c xfer: < 10 33 c2 >
saa7134[0]: i2c xfer: < 10 34 96 >
saa7134[0]: i2c xfer: < 10 35 6d >
saa7134[0]: i2c xfer: < 10 37 [fe quirk] < 11 =34 >
saa7134[0]: i2c xfer: < 10 37 34 >
saa7134[0]: i2c xfer: < 10 06 [fe quirk] < 11 =b0 >
saa7134[0]: i2c xfer: < 10 07 [fe quirk] < 11 =80 >
saa7134[0]: i2c xfer: < 10 07 80 >
saa7134[0]: i2c xfer: < 10 11 67 >
saa7134[0]: i2c xfer: < 10 13 [fe quirk] < 11 =67 >
saa7134[0]: i2c xfer: < 10 14 [fe quirk] < 11 =29 >
tda1004x: found firmware revision 29 -- ok
saa7134[0]: i2c xfer: < 10 07 [fe quirk] < 11 =80 >
saa7134[0]: i2c xfer: < 10 07 80 >
saa7134[0]: i2c xfer: < 10 01 87 >
saa7134[0]: i2c xfer: < 10 16 88 >
saa7134[0]: i2c xfer: < 10 43 0a >
saa7134[0]: i2c xfer: < 10 3d [fe quirk] < 11 =00 >
saa7134[0]: i2c xfer: < 10 3d 60 >
saa7134[0]: i2c xfer: < 10 3b [fe quirk] < 11 =ff >
saa7134[0]: i2c xfer: < 10 3b 7f >
saa7134[0]: i2c xfer: < 10 3a [fe quirk] < 11 =00 >
saa7134[0]: i2c xfer: < 10 3a 00 >
saa7134[0]: i2c xfer: < 10 37 38 >
saa7134[0]: i2c xfer: < 10 3b [fe quirk] < 11 =7f >
saa7134[0]: i2c xfer: < 10 3b 79 >
saa7134[0]: i2c xfer: < 10 47 00 >
saa7134[0]: i2c xfer: < 10 48 ff >
saa7134[0]: i2c xfer: < 10 49 00 >
saa7134[0]: i2c xfer: < 10 4a ff >
saa7134[0]: i2c xfer: < 10 46 12 >
saa7134[0]: i2c xfer: < 10 4f 1a >
saa7134[0]: i2c xfer: < 10 1e 07 >
saa7134[0]: i2c xfer: < 10 1f c0 >
saa7134[0]: i2c xfer: < 10 3b ff >
saa7134[0]: i2c xfer: < 10 37 [fe quirk] < 11 =38 >
saa7134[0]: i2c xfer: < 10 37 f8 >
saa7134[0]: i2c xfer: < 10 07 [fe quirk] < 11 =80 >
saa7134[0]: i2c xfer: < 10 07 81 >
saa7134[0]: i2c xfer: < 10 07 [fe quirk] < 11 =81 >
saa7134[0]: i2c xfer: < 10 07 83 >
saa7134[0]: i2c xfer: < 10 07 [fe quirk] < 11 =83 >
saa7134[0]: i2c xfer: < 10 07 83 >
saa7134[0]: i2c xfer: < c2 9c 60 85 54 >
saa7134 ALSA driver for DMA sound loaded
IRQ 19/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7134[0]/alsa: saa7134[0] at 0xf9ffe000 irq 19 registered as card -1
[root@localhost v4l-dvb]# lsmod | grep saa
saa7134_alsa 13424 0
saa7134_dvb 24636 0
videobuf_dvb 7284 1 saa7134_dvb
saa7134 166180 2 saa7134_alsa,saa7134_dvb
ir_common 44164 1 saa7134
v4l2_common 15520 2 tuner,saa7134
videodev 35968 3 tuner,saa7134,v4l2_common
videobuf_dma_sg 12100 3 saa7134_alsa,saa7134_dvb,saa7134
videobuf_core 16436 3 videobuf_dvb,saa7134,videobuf_dma_sg
tveeprom 13748 1 saa7134
snd_pcm 80504 3 saa7134_alsa,snd_hda_intel,snd_hda_codec
i2c_core 23088 13
tda1004x,saa7134_dvb,tuner_simple,tda9887,tda8290,tuner,saa7134,v4l2_common,videodev,tveeprom,nvidia,i2c_algo_bit,i2c_i801
snd 66520 9
saa7134_alsa,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
______________________________
______________________________
for 2.6.25
[root@localhost ~]$ /sbin/modprobe saa7134 i2c_debug=1 irq_debug=1
[root@localhost ~]$ dmesg
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
saa7134[0]: found at 0000:02:03.0, rev: 1, irq: 19, latency: 32, mmio:
0xf9ffe000
saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM
[card=100,autodetected]
saa7134[0]: board init: gpio is 0
saa7134[0]: i2c xfer: < a0 >
saa7134[0]: i2c xfer: < a0 >
tveeprom i2c attach [addr=0x50,client=tveeprom]
saa7134[0]: i2c xfer: < f5 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 8f ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < e3 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 5b ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < a0 00 >
saa7134[0]: i2c xfer: < a1 =43 =10 =60 =48 =54 =20 =1c =00 =43 =43 =a9
=1c =55 =d2 =b2 =92 =00 =ff =86 =0f =ff =20 =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =01 =40 =01 =03 =03 =02 =03 =04 =08 =ff =00 =4c =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=1d =00 =c2 =86 =10 =01 =01 =0d =01 =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff >
saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c xfer: < 20 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 84 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 86 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 94 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 96 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < c0 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < c2 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < c4 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < c6 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < c8 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < ca ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < cc ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < ce ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < d0 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < d2 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < d4 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < d6 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < d8 ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < da ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < dc ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < de ERROR: NO_DEVICE
saa7134[0]: i2c xfer: < 10 07 02 >
saa7134[0]: registered device video1 [v4l2]
saa7134[0]: registered device vbi1
saa7134[0]: registered device radio0
saa7134[0]: i2c xfer: < 10 00 [fd quirk] < 11 =46 >
saa7134[0]: i2c xfer: < 10 07 [fd quirk] < 11 =02 >
saa7134[0]: i2c xfer: < 10 07 02 >
saa7134[0]: i2c xfer: < c3 =bc >
saa7134[0]: i2c xfer: < 10 07 [fd quirk] < 11 =02 >
saa7134[0]: i2c xfer: < 10 07 00 >
DVB: registering new adapter (saa7134[0])
DVB: registering frontend 1 (Philips TDA10046H DVB-T)...
saa7134[0]: i2c xfer: < 10 07 80 >
saa7134[0]: i2c xfer: < 10 3b [fd quirk] < 11 =ff >
saa7134[0]: i2c xfer: < 10 3b fe >
saa7134[0]: i2c xfer: < 10 2d f0 >
tda1004x: setting up plls for 53MHz sampling clock
saa7134[0]: i2c xfer: < 10 2f 08 >
saa7134[0]: i2c xfer: < 10 30 03 >
saa7134[0]: i2c xfer: < 10 3e 67 >
saa7134[0]: i2c xfer: < 10 4d d7 >
saa7134[0]: i2c xfer: < 10 4e 3f >
saa7134[0]: i2c xfer: < 10 31 5c >
saa7134[0]: i2c xfer: < 10 32 32 >
saa7134[0]: i2c xfer: < 10 33 c2 >
saa7134[0]: i2c xfer: < 10 34 96 >
saa7134[0]: i2c xfer: < 10 35 6d >
saa7134[0]: i2c xfer: < 10 37 [fd quirk] < 11 =34 >
saa7134[0]: i2c xfer: < 10 37 34 >
saa7134[0]: i2c xfer: < 10 06 [fd quirk] < 11 =b0 >
saa7134[0]: i2c xfer: < 10 07 [fd quirk] < 11 =80 >
saa7134[0]: i2c xfer: < 10 07 80 >
saa7134[0]: i2c xfer: < 10 11 67 >
saa7134[0]: i2c xfer: < 10 13 [fd quirk] < 11 =67 >
saa7134[0]: i2c xfer: < 10 14 [fd quirk] < 11 =29 >
tda1004x: found firmware revision 29 -- ok
saa7134[0]: i2c xfer: < 10 07 [fd quirk] < 11 =80 >
saa7134[0]: i2c xfer: < 10 07 80 >
saa7134[0]: i2c xfer: < 10 01 87 >
saa7134[0]: i2c xfer: < 10 16 88 >
saa7134[0]: i2c xfer: < 10 43 0a >
saa7134[0]: i2c xfer: < 10 3d [fd quirk] < 11 =00 >
saa7134[0]: i2c xfer: < 10 3d 60 >
saa7134[0]: i2c xfer: < 10 3b [fd quirk] < 11 =ff >
saa7134[0]: i2c xfer: < 10 3b 7f >
saa7134[0]: i2c xfer: < 10 3a [fd quirk] < 11 =00 >
saa7134[0]: i2c xfer: < 10 3a 00 >
saa7134[0]: i2c xfer: < 10 37 38 >
saa7134[0]: i2c xfer: < 10 3b [fd quirk] < 11 =7f >
saa7134[0]: i2c xfer: < 10 3b 79 >
saa7134[0]: i2c xfer: < 10 47 00 >
saa7134[0]: i2c xfer: < 10 48 ff >
saa7134[0]: i2c xfer: < 10 49 00 >
saa7134[0]: i2c xfer: < 10 4a ff >
saa7134[0]: i2c xfer: < 10 46 12 >
saa7134[0]: i2c xfer: < 10 4f 1a >
saa7134[0]: i2c xfer: < 10 1e 07 >
saa7134[0]: i2c xfer: < 10 1f c0 >
saa7134[0]: i2c xfer: < 10 3b ff >
saa7134[0]: i2c xfer: < 10 37 [fd quirk] < 11 =38 >
saa7134[0]: i2c xfer: < 10 37 f8 >
saa7134[0]: i2c xfer: < 10 07 [fd quirk] < 11 =80 >
saa7134[0]: i2c xfer: < 10 07 81 >
saa7134[0]: i2c xfer: < 10 07 [fd quirk] < 11 =81 >
saa7134[0]: i2c xfer: < 10 07 83 >
saa7134[0]: i2c xfer: < 10 07 [fd quirk] < 11 =83 >
saa7134[0]: i2c xfer: < 10 07 83 >
saa7134[0]: i2c xfer: < c2 9c 60 85 54 >
[root@localhost ~]$ lsmod | grep saa
saa7134_dvb 17164 0
saa7134 140884 1 saa7134_dvb
ir_kbd_i2c 11280 1 saa7134
videobuf_dvb 8068 2 saa7134_dvb,cx88_dvb
videodev 35072 4 tuner,saa7134,cx8800,cx88xx
compat_ioctl32 2432 2 saa7134,cx8800
v4l2_common 13312 3 tuner,saa7134,cx8800
ir_common 38532 3 saa7134,ir_kbd_i2c,cx88xx
tveeprom 16912 2 saa7134,cx88xx
videobuf_dma_sg 15236 7
saa7134_dvb,saa7134,cx88_dvb,videobuf_dvb,cx8802,cx8800,cx88xx
videobuf_core 20356 6
saa7134,videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg
i2c_core 26004 24
tda1004x,saa7134_dvb,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,saa7134,ir_kbd_i2c,dvb_pll,cx22702,cx88_vp3054_i2c,cx88xx,v4l2_common,i2c_algo_bit,tveeprom,nvidia,i2c_i801
composite input is working but not DVB.
reply other threads:[~2009-06-19 8:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A3B45DD.8090509@inserm.fr \
--to=yves.lefeuvre@inserm.fr \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox