From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from acoma.photonsoftware.net ([65.254.60.10]:51264 "EHLO acoma.photonsoftware.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751827AbZGAPCx (ORCPT ); Wed, 1 Jul 2009 11:02:53 -0400 Received: from localhost ([127.0.0.1] helo=[127.0.0.100]) by acoma.photonsoftware.net with esmtpa (Exim 4.69) (envelope-from ) id 1MM0XX-0004lq-2L for linux-media@vger.kernel.org; Wed, 01 Jul 2009 15:11:59 +0100 Message-ID: <4A4B6EB3.7070207@hubstar.net> Date: Wed, 01 Jul 2009 15:12:03 +0100 From: "ldone@hubstar.net" Reply-To: "l d one"@hubstar.net MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: [Fwd: [linux-dvb] HVR-1700 No channels found - signal locked] Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi, I'm having problems getting the HVR-1700 working. It seems to be supported, but I can't get the DVB-T channels to be detected. I'll try to summarise. OS is SUSE 11.1 Kernel is 2.6.27.23-0.1-default X86_64 platform. I have tried both the latest v4l code and the default code. System has had the following PVR-150 - works fine HVR-1300 - worked fine in either Analogue OR digital mode. Could not switch back to digital once Analogue started. Channels not found. Signal found just no channels. Fine if I use just digital mode. Hauppauge Nova DVB-S plus - Works fine Pinnacle PCIe Dual Hybrid Pro - no drivers Hauppauge Nova T-Stick - works fine Hauppauge PCIe HVR-1700 no channels found. >>From start up - thing look okay Jun 30 23:44:09 mediacentral kernel: tda18271 1-0060: destroying instance Jun 30 23:44:14 mediacentral kernel: cx23885 driver version 0.0.2 loaded Jun 30 23:44:14 mediacentral kernel: cx23885 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IR$ Jun 30 23:44:14 mediacentral kernel: CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [car$ Jun 30 23:44:14 mediacentral kernel: tveeprom 0-0050: Hauppauge model 81519, rev B2E9, serial# 3612252 Jun 30 23:44:14 mediacentral kernel: tveeprom 0-0050: MAC address is 00-0D-FE-37-1E-5C Jun 30 23:44:14 mediacentral kernel: tveeprom 0-0050: tuner model is Philips 18271_8295 (idx 149, type 54) Jun 30 23:44:14 mediacentral kernel: tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC$ Jun 30 23:44:14 mediacentral kernel: tveeprom 0-0050: audio processor is CX23885 (idx 39) Jun 30 23:44:14 mediacentral kernel: tveeprom 0-0050: decoder processor is CX23885 (idx 33) Jun 30 23:44:14 mediacentral kernel: tveeprom 0-0050: has no radio Jun 30 23:44:14 mediacentral kernel: cx23885[0]: hauppauge eeprom: model=81519 Jun 30 23:44:14 mediacentral kernel: cx25840 2-0044: cx25 0-21 found @ 0x88 (cx23885[0]) Jun 30 23:44:14 mediacentral kernel: firmware: requesting v4l-cx23885-avcore-01.fw Jun 30 23:44:15 mediacentral kernel: cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) Jun 30 23:44:15 mediacentral kernel: cx23885_dvb_register() allocating 1 frontend(s) Jun 30 23:44:15 mediacentral kernel: cx23885[0]: cx23885 based dvb card Jun 30 23:44:15 mediacentral kernel: tda829x 1-0042: type set to tda8295 Jun 30 23:44:15 mediacentral kernel: tda18271 1-0060: creating new instance Jun 30 23:44:15 mediacentral kernel: TDA18271HD/C1 detected @ 1-0060 Jun 30 23:44:16 mediacentral kernel: DVB: registering new adapter (cx23885[0]) Jun 30 23:44:16 mediacentral kernel: DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)... Jun 30 23:44:16 mediacentral kernel: DVB: registering new adapter (cx23885[0]) Jun 30 23:44:16 mediacentral kernel: DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)... Jun 30 23:44:16 mediacentral kernel: cx23885_dev_checkrevision() Hardware revision = 0xb0 Jun 30 23:44:16 mediacentral kernel: cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 16, latency: 0, mmio: 0x$ Jun 30 23:44:16 mediacentral kernel: cx23885 0000:03:00.0: setting latency timer to 64 Jun 30 23:44:26 mediacentral kernel: tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0$ Jun 30 23:44:26 mediacentral kernel: firmware: requesting dvb-fe-tda10048-1.0.fw Jun 30 23:44:26 mediacentral kernel: tda10048_firmware_upload: firmware read 24878 bytes. Jun 30 23:44:26 mediacentral kernel: tda10048_firmware_upload: firmware uploading Jun 30 23:44:29 mediacentral kernel: tda10048_firmware_upload: firmware uploaded scan shows using '/dev/dvb/adapter8/frontend0' and '/dev/dvb/adapter8/demux0' initial transponder 842000000 0 3 9 1 0 0 0 initial transponder 841833000 0 3 9 1 0 0 0 initial transponder 729833000 0 2 9 3 0 0 0 initial transponder 729667000 0 2 9 3 0 0 0 initial transponder 730000000 0 2 9 3 0 0 0 initial transponder 761833000 0 2 9 3 0 0 0 initial transponder 785833000 0 3 9 1 0 0 0 initial transponder 809833000 0 3 9 1 0 0 0 initial transponder 690000000 0 3 9 1 0 0 0 >>> tune to: 842000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: Kaffeine can't tune in on this either. I've searched everything but it doesn't seem a common problem or no solutions forth coming. Is there anything I can try? I'm out of ideas, and I really just want it to work out of obsession now. I don't have windows on that system, but I wonder if it shares the same problem with the 1300 where DVB initialisation after analogue use didn't happen right. card info 03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02) Subsystem: Hauppauge computer works Inc. Device 8101 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [200] Virtual Channel Kernel driver in use: cx23885 Kernel modules: cx23885 Thanks anyone