From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.redhat.com (mx1.redhat.com [172.16.48.31]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n6FJKIo1031441 for ; Wed, 15 Jul 2009 15:20:18 -0400 Received: from mail-pz0-f172.google.com (mail-pz0-f172.google.com [209.85.222.172]) by mx1.redhat.com (8.13.8/8.13.8) with ESMTP id n6FJJWBB017954 for ; Wed, 15 Jul 2009 15:20:03 -0400 Received: by mail-pz0-f172.google.com with SMTP id 2so2944481pzk.23 for ; Wed, 15 Jul 2009 12:20:03 -0700 (PDT) Message-ID: <4A5E2BAF.80809@gmail.com> Date: Wed, 15 Jul 2009 12:19:11 -0700 From: Mark MIME-Version: 1.0 To: video4linux-list@redhat.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: ZoneMinder Linux Mint Hauppauge impact vcb List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: I have been tweaking with zoneminder to see if I can get a simple camera setup working. So far I have been able to load zoneminder and get it working, but I cannot get it to display the camera. When I use VLC I can see the camera is working, but its in black and white. I am using the bttv878 driver for the capture card. So far no luck getting it to work. Printed below is a copy of my dmesg and lspci. I'd appreciate any help I could get on this, I have over 30 hours already invested in this. *DMSG *[ 0.000000] BIOS EBDA/lowmem at: 00000000/000a0000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-16000 [ 0.000000] RAMDISK: 1f8a9000 - 1ffdf612 [ 0.000000] ACPI: RSDP 000F6C90, 0014 (r0 IntelR) [ 0.000000] ACPI: RSDT 1FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 1FFF30C0, 360C (r1 INTELR AWRDACPI 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 1FFF0000, 0040 [ 0.000000] ACPI: APIC 1FFF6700, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 00000000 - 1fff0000 [ 0.000000] bootmap 00012000 - 00016000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [001f8a9000 - 001ffdf612] RAMDISK ==> [001f8a9000 - 001ffdf612] [ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] [ 0.000000] found SMP MP-table at [c00f51d0] 000f51d0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130944 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 2004.490 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] allocated 2620800 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 501404k/524224k available (4126k kernel code, 22256k reserved, 2208k data, 532k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xe07f0000 - 0xff3fe000 ( 492 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4008.98 BogoMIPS (lpj=8017960) [ 0.004044] Security Framework initialized [ 0.004055] SELinux: Disabled at boot. [ 0.004083] AppArmor: AppArmor initialized [ 0.004101] Mount-cache hash table entries: 512 [ 0.004320] Initializing cgroup subsys ns [ 0.004328] Initializing cgroup subsys cpuacct [ 0.004334] Initializing cgroup subsys memory [ 0.004342] Initializing cgroup subsys freezer [ 0.004365] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004372] CPU: L2 cache: 512K [ 0.004378] CPU: Hyper-Threading is disabled [ 0.004401] Checking 'hlt' instruction... OK. [ 0.021032] SMP alternatives: switching to UP code [ 0.163954] ACPI: Core revision 20080926 [ 0.167596] ACPI: Checking initramfs for custom DSDT [ 0.628606] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.669916] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 [ 0.672002] Brought up 1 CPUs [ 0.672002] Total of 1 processors activated (4008.98 BogoMIPS). [ 0.672002] CPU0 attaching NULL sched-domain. [ 0.672002] net_namespace: 776 bytes [ 0.672002] Booting paravirtualized kernel on bare hardware [ 0.672002] Time: 5:14:56 Date: 07/15/09 [ 0.672002] regulator: core version 0.5 [ 0.672002] NET: Registered protocol family 16 [ 0.672002] EISA bus registered [ 0.672002] ACPI: bus type pci registered [ 0.698338] PCI: PCI BIOS revision 2.10 entry at 0xfb5d0, last bus=2 [ 0.698342] PCI: Using configuration type 1 for base access [ 0.700804] ACPI: EC: Look up EC in DSDT [ 0.708041] ACPI: Interpreter enabled [ 0.708048] ACPI: (supports S0 S1 S4 S5) [ 0.708080] ACPI: Using IOAPIC for interrupt routing [ 0.714211] ACPI: No dock devices found. [ 0.714235] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.714317] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.714486] pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f] [ 0.714549] pci 0000:00:1d.1: reg 20 io port: [0xb000-0xb01f] [ 0.714612] pci 0000:00:1d.2: reg 20 io port: [0xb400-0xb41f] [ 0.714674] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe6200000-0xe62003ff] [ 0.714727] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.714734] pci 0000:00:1d.7: PME# disabled [ 0.714788] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.714790] * this clock source is slow. If you are sure your timer does not have [ 0.714792] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.714839] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.714849] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 0.714854] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.714880] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.714890] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.714899] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.714908] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.714917] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f] [ 0.714925] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.714986] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.715037] pci 0000:00:1f.5: reg 10 io port: [0xc000-0xc0ff] [ 0.715046] pci 0000:00:1f.5: reg 14 io port: [0xc400-0xc43f] [ 0.715054] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe6201000-0xe62011ff] [ 0.715063] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe6202000-0xe62020ff] [ 0.715091] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.715097] pci 0000:00:1f.5: PME# disabled [ 0.715149] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.715157] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff] [ 0.715165] pci 0000:01:00.0: reg 18 32bit mmio: [0xe5000000-0xe500ffff] [ 0.715186] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.715199] pci 0000:01:00.0: supports D1 D2 [ 0.715237] pci 0000:01:00.1: reg 10 32bit mmio: [0xd8000000-0xdfffffff] [ 0.715246] pci 0000:01:00.1: reg 14 32bit mmio: [0xe5010000-0xe501ffff] [ 0.715279] pci 0000:01:00.1: supports D1 D2 [ 0.715331] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.715337] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff] [ 0.715344] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.715394] pci 0000:02:06.0: reg 10 io port: [0xa000-0xa0ff] [ 0.715403] pci 0000:02:06.0: reg 14 32bit mmio: [0xe6000000-0xe60000ff] [ 0.715441] pci 0000:02:06.0: supports D1 D2 [ 0.715445] pci 0000:02:06.0: PME# supported from D1 D2 D3hot D3cold [ 0.715450] pci 0000:02:06.0: PME# disabled [ 0.715489] pci 0000:02:07.0: reg 10 32bit mmio: [0xe6001000-0xe60017ff] [ 0.715498] pci 0000:02:07.0: reg 14 io port: [0xa400-0xa47f] [ 0.715537] pci 0000:02:07.0: supports D2 [ 0.715540] pci 0000:02:07.0: PME# supported from D2 D3hot D3cold [ 0.715546] pci 0000:02:07.0: PME# disabled [ 0.715592] pci 0000:02:08.0: reg 10 32bit mmio: [0xe6100000-0xe6100fff] [ 0.715679] pci 0000:02:08.1: reg 10 32bit mmio: [0xe6101000-0xe6101fff] [ 0.715769] pci 0000:00:1e.0: transparent bridge [ 0.715775] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff] [ 0.715782] pci 0000:00:1e.0: bridge 32bit mmio: [0xe6000000-0xe60fffff] [ 0.715788] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe6100000-0xe61fffff] [ 0.715804] bus 00 -> node 0 [ 0.715815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.716174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.741443] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.741632] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.741812] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.741991] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.742171] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.742351] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.742533] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.742714] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.742907] ACPI: WMI: Mapper loaded [ 0.743251] SCSI subsystem initialized [ 0.743313] libata version 3.00 loaded. [ 0.743394] usbcore: registered new interface driver usbfs [ 0.743425] usbcore: registered new interface driver hub [ 0.743469] usbcore: registered new device driver usb [ 0.743659] PCI: Using ACPI for IRQ routing [ 0.743810] Bluetooth: Core ver 2.13 [ 0.743810] NET: Registered protocol family 31 [ 0.743810] Bluetooth: HCI device and connection manager initialized [ 0.743810] Bluetooth: HCI socket layer initialized [ 0.743810] NET: Registered protocol family 8 [ 0.743810] NET: Registered protocol family 20 [ 0.743810] NetLabel: Initializing [ 0.743810] NetLabel: domain hash size = 128 [ 0.743810] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.743810] NetLabel: unlabeled traffic allowed by default [ 0.744112] AppArmor: AppArmor Filesystem Enabled [ 0.744152] pnp: PnP ACPI init [ 0.744171] ACPI: bus type pnp registered [ 0.748882] pnp: PnP ACPI: found 13 devices [ 0.748886] ACPI: ACPI bus type pnp unregistered [ 0.748892] PnPBIOS: Disabled by ACPI PNP [ 0.748909] system 00:00: iomem range 0xcd000-0xcffff has been reserved [ 0.748914] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.748918] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.748922] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.748927] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.748931] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.748935] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.748940] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.748944] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.748948] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.748953] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved [ 0.748957] system 00:00: iomem range 0xe0000-0xeffff has been reserved [ 0.748967] system 00:02: ioport range 0x400-0x4bf could not be reserved [ 0.748976] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.748980] system 00:03: ioport range 0x290-0x29f has been reserved [ 0.748984] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.783850] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.783856] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.783863] pci 0000:00:01.0: MEM window: 0xe4000000-0xe5ffffff [ 0.783870] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.783880] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.783884] pci 0000:00:1e.0: IO window: 0xa000-0xafff [ 0.783891] pci 0000:00:1e.0: MEM window: 0xe6000000-0xe60fffff [ 0.783897] pci 0000:00:1e.0: PREFETCH window: 0x000000e6100000-0x000000e61fffff [ 0.783919] pci 0000:00:1e.0: setting latency timer to 64 [ 0.783926] bus: 00 index 0 io port: [0x00-0xffff] [ 0.783929] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.783932] bus: 01 index 0 io port: [0x9000-0x9fff] [ 0.783936] bus: 01 index 1 mmio: [0xe4000000-0xe5ffffff] [ 0.783939] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.783942] bus: 01 index 3 mmio: [0x0-0x0] [ 0.783946] bus: 02 index 0 io port: [0xa000-0xafff] [ 0.783949] bus: 02 index 1 mmio: [0xe6000000-0xe60fffff] [ 0.783953] bus: 02 index 2 mmio: [0xe6100000-0xe61fffff] [ 0.783956] bus: 02 index 3 io port: [0x00-0xffff] [ 0.783959] bus: 02 index 4 mmio: [0x000000-0xffffffff] [ 0.783975] NET: Registered protocol family 2 [ 0.784180] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.784544] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.784664] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.784777] TCP: Hash tables configured (established 16384 bind 16384) [ 0.784781] TCP reno registered [ 0.784929] NET: Registered protocol family 1 [ 0.785127] checking if image is initramfs... it is [ 1.284060] Switched to high resolution mode on CPU 0 [ 1.753843] Freeing initrd memory: 7385k freed [ 1.753957] cpufreq: No nForce2 chipset. [ 1.754199] audit: initializing netlink socket (disabled) [ 1.754230] type=2000 audit(1247634896.752:1): initialized [ 1.763439] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.765351] VFS: Disk quotas dquot_6.5.1 [ 1.765442] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.766431] fuse init (API version 7.10) [ 1.766560] msgmni has been set to 993 [ 1.766834] alg: No test for stdrng (krng) [ 1.766856] io scheduler noop registered [ 1.766859] io scheduler anticipatory registered [ 1.766862] io scheduler deadline registered [ 1.766891] io scheduler cfq registered (default) [ 1.767007] pci 0000:01:00.0: Boot video device [ 1.771375] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.771391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.771598] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.771602] ACPI: Power Button (FF) [PWRF] [ 1.771672] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.771676] ACPI: Power Button (CM) [PWRB] [ 1.771744] fan PNP0C0B:00: registered as cooling_device0 [ 1.771754] ACPI: Fan [FAN] (on) [ 1.772108] processor ACPI_CPU:00: registered as cooling_device1 [ 1.775159] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.775544] ACPI: Thermal Zone [THRM] (35 C) [ 1.775610] isapnp: Scanning for PnP cards... [ 2.129521] isapnp: No Plug & Play device found [ 2.131661] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.131774] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.131875] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.132355] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.132517] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.133751] brd: module loaded [ 2.134315] loop: module loaded [ 2.134457] Fixed MDIO Bus: probed [ 2.134467] PPP generic driver version 2.4.2 [ 2.134565] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.134614] Driver 'sd' needs updating - please use bus_type methods [ 2.134631] Driver 'sr' needs updating - please use bus_type methods [ 2.134749] ata_piix 0000:00:1f.1: version 2.12 [ 2.134778] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.134861] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.135036] scsi0 : ata_piix [ 2.135198] scsi1 : ata_piix [ 2.136431] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.136436] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.520573] ata2.00: ATAPI: BENQ DVD LS DW1655, BCGB, max UDMA/33 [ 2.521070] ata2.01: ATA-6: ST340014A, 3.06, max UDMA/100 [ 2.521074] ata2.01: 78165360 sectors, multi 16: LBA48 [ 2.536654] ata2.00: configured for UDMA/33 [ 2.552456] ata2.01: configured for UDMA/100 [ 2.555090] scsi 1:0:0:0: CD-ROM BENQ DVD LS DW1655 BCGB PQ: 0 ANSI: 5 [ 2.563287] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.563292] Uniform CD-ROM driver Revision: 3.20 [ 2.563464] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.563551] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 2.563676] scsi 1:0:1:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5 [ 2.563825] sd 1:0:1:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 2.563851] sd 1:0:1:0: [sda] Write Protect is off [ 2.563855] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.563895] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.563989] sd 1:0:1:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 2.564025] sd 1:0:1:0: [sda] Write Protect is off [ 2.564029] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.564068] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.564073] sda: sda1 sda2 < sda5 > [ 2.602941] sd 1:0:1:0: [sda] Attached SCSI disk [ 2.603020] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 2.603991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.604052] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.604086] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.604092] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.604190] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.608121] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 2.608143] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe6200000 [ 2.624014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.624130] usb usb1: configuration #1 chosen from 1 choice [ 2.624173] hub 1-0:1.0: USB hub found [ 2.624192] hub 1-0:1.0: 6 ports detected [ 2.624375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.624405] uhci_hcd: USB Universal Host Controller Interface driver [ 2.624472] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.624484] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.624489] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.624564] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.624600] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800 [ 2.624716] usb usb2: configuration #1 chosen from 1 choice [ 2.624757] hub 2-0:1.0: USB hub found [ 2.624773] hub 2-0:1.0: 2 ports detected [ 2.624900] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.624910] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.624914] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.624981] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.625015] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 [ 2.625121] usb usb3: configuration #1 chosen from 1 choice [ 2.625160] hub 3-0:1.0: USB hub found [ 2.625177] hub 3-0:1.0: 2 ports detected [ 2.625300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.625309] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.625313] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.625377] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.625412] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 2.625529] usb usb4: configuration #1 chosen from 1 choice [ 2.625583] hub 4-0:1.0: USB hub found [ 2.625597] hub 4-0:1.0: 2 ports detected [ 2.625775] usbcore: registered new interface driver libusual [ 2.625844] usbcore: registered new interface driver usbserial [ 2.625862] USB Serial support registered for generic [ 2.625889] usbcore: registered new interface driver usbserial_generic [ 2.625893] usbserial: USB Serial Driver core [ 2.625962] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.625966] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.626357] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.626529] mice: PS/2 mouse device common for all mice [ 2.626725] rtc_cmos 00:05: RTC can wake from S4 [ 2.626782] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.626810] rtc0: alarms up to one month, 242 bytes nvram [ 2.626930] device-mapper: uevent: version 1.0.3 [ 2.627119] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.627197] device-mapper: multipath: version 1.0.5 loaded [ 2.627202] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.627337] EISA: Probing bus 0 at eisa.0 [ 2.627381] EISA: Detected 0 cards. [ 2.627425] cpuidle: using governor ladder [ 2.627429] cpuidle: using governor menu [ 2.628220] TCP cubic registered [ 2.628341] NET: Registered protocol family 10 [ 2.628996] lo: Disabled Privacy Extensions [ 2.629459] NET: Registered protocol family 17 [ 2.629494] Bluetooth: L2CAP ver 2.11 [ 2.629497] Bluetooth: L2CAP socket layer initialized [ 2.629502] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.629505] Bluetooth: SCO socket layer initialized [ 2.629557] Bluetooth: RFCOMM socket layer initialized [ 2.629570] Bluetooth: RFCOMM TTY layer initialized [ 2.629573] Bluetooth: RFCOMM ver 1.10 [ 2.629639] Using IPI No-Shortcut mode [ 2.629793] registered taskstats version 1 [ 2.629984] Magic number: 1:827:213 [ 2.630093] rtc_cmos 00:05: setting system clock to 2009-07-15 05:14:58 UTC (1247634898) [ 2.630098] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.630100] EDD information not available. [ 2.630979] Freeing unused kernel memory: 532k freed [ 2.631146] Write protecting the kernel text: 4128k [ 2.631201] Write protecting the kernel read-only data: 1532k [ 2.674595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.121945] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.285929] Floppy drive(s): fd0 is 1.44M [ 3.303823] FDC 0 is a post-1991 82077 [ 3.314678] usb 2-1: configuration #1 chosen from 1 choice [ 3.668173] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.668222] 8139cp 0000:02:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 3.672900] 8139too Fast Ethernet driver 0.9.28 [ 3.672963] 8139too 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.674321] eth0: RealTek RTL8139 at 0xa000, 00:30:1b:ac:e9:43, IRQ 18 [ 3.674325] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 3.718257] ohci1394 0000:02:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.771115] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[e6001000-e60017ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 4.652630] usbcore: registered new interface driver hiddev [ 4.652775] usbcore: registered new interface driver usbhid [ 4.652780] usbhid: v2.6:USB HID core driver [ 4.695919] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 4.699429] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.0-1/input0 [ 4.787369] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor [ 4.837590] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input5 [ 4.842714] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.0-1/input1 [ 4.970152] PM: Starting manual resume from disk [ 4.970159] PM: Resume from partition 8:5 [ 4.970162] PM: Checking hibernation image. [ 4.970389] PM: Resume from disk failed. [ 5.015361] kjournald starting. Commit interval 5 seconds [ 5.015381] EXT3-fs: mounted filesystem with ordered data mode. [ 5.104189] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bac0000e9a7] [ 10.999732] udev: starting version 141 [ 11.155920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.224078] parport_pc 00:0b: reported by Plug and Play ACPI [ 11.224125] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.241706] Linux agpgart interface v0.103 [ 11.306574] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 11.310936] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 11.340766] intel_rng: FWH not detected [ 11.393811] iTCO_vendor_support: vendor-support=0 [ 11.396654] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 11.396831] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) [ 11.396952] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.565248] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 12.228960] ppdev: user-space parallel port driver [ 12.317071] Linux video capture interface: v2.00 [ 12.378402] bttv: driver version 0.9.17 loaded [ 12.378408] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 12.378729] bttv: Bt8xx card found (0). [ 12.378760] bttv 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 12.378775] bttv0: Bt878 (rev 17) at 0000:02:08.0, irq: 20, latency: 32, mmio: 0xe6100000 [ 12.378914] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 12.378919] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 12.378968] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 12.381458] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 12.412672] tveeprom 0-0050: Hauppauge model 64405, rev C1 , serial# 10684629 [ 12.412677] tveeprom 0-0050: tuner model is Unspecified (idx 2, type 4) [ 12.412681] tveeprom 0-0050: TV standards UNKNOWN (eeprom 0x01) [ 12.412685] tveeprom 0-0050: audio processor is None (idx 0) [ 12.412688] tveeprom 0-0050: decoder processor is BT878 (idx 14) [ 12.412691] tveeprom 0-0050: has no radio [ 12.412694] bttv0: Hauppauge eeprom indicates model#64405 [ 12.412698] bttv0: tuner absent [ 12.412702] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 12.434126] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 12.447212] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 12.527382] bttv0: registered device video0 [ 12.527470] bttv0: registered device vbi0 [ 12.527495] bttv0: PLL: 28636363 => 35468950 .. ok [ 12.573459] Bt87x 0000:02:08.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 12.573986] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 12.716771] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 12.716844] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 13.040017] intel8x0_measure_ac97_clock: measured 52575 usecs [ 13.040022] intel8x0: clocking to 48000 [ 13.253637] lp0: using parport0 (interrupt-driven). [ 13.392189] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 13.957653] EXT3 FS on sda1, internal journal [ 34.858682] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.858688] Bluetooth: BNEP filters: protocol multicast [ 34.891629] Bridge firewalling registered [ 36.486293] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 37.118925] [drm] Initialized drm 1.1.0 20060810 [ 37.153430] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 37.604164] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 37.604191] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 37.604230] pci 0000:01:00.0: putting AGP V2 device into 4x mode [ 37.832266] [drm] Setting GART location based on new memory map [ 37.832282] [drm] Loading R200 Microcode [ 37.832339] [drm] writeback test succeeded in 1 usecs [ 41.131627] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 51.340011] eth0: no IPv6 routers present [ 2900.333999] bttv0: PLL can sleep, using XTAL (28636363). *LSPCI* 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01) 01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01) 02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 46) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list