From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from rtr.ca ([76.10.145.34]:34649 "EHLO mail.rtr.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754366AbZGSOpU (ORCPT ); Sun, 19 Jul 2009 10:45:20 -0400 Message-ID: <4A63317D.6040208@rtr.ca> Date: Sun, 19 Jul 2009 10:45:17 -0400 From: Mark Lord MIME-Version: 1.0 To: Devin Heitmueller Cc: Steven Toth , linux-media@vger.kernel.org, Linux Kernel Subject: Re: Regression 2.6.31: xc5000 no longer works with Myth-0.21-fixes branch References: <4A631C8F.7000002@rtr.ca> <829197380907190706i686fd1afwdca0d8be648129@mail.gmail.com> In-Reply-To: <829197380907190706i686fd1afwdca0d8be648129@mail.gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Devin Heitmueller wrote: > On Sun, Jul 19, 2009 at 9:15 AM, Mark Lord wrote: .. >> The mythbackend (recording) program tunes/records fine with it, >> but any attempt to watch "Live TV" via mythfrontend just locks >> up the UI for 30 seconds or so, and then it reverts to the menus. .. > Could you please provide the following: > > 1. Exactly which product you are using (including the USB/PCI id) .. Doh! Yes, of course! It's the popular Hauppauge HVR-950Q USB Stick: Bus 007 Device 006: ID 2040:7200 Hauppauge > 3. Whether you are using the device for digital, analog, or both, and > which the mythtv attempted to use when running the mythfrontend. .. Digital-only, since the tuner stick has never worked (and still doesn't) for analog NTSC with MythTV-0.21-fixes. That's okay, I really only use it for digital ATSC over-the-air (OTA) reception. > 2. dmesg output from the time the card is inserted (or booted up if > PCI) to the time *after* you attempted to use the frontend with mythtv. The remainder of this email contains (only) the dmesg output. Thanks. rocessor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5319.72 BogoMIPS (lpj=2659862) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10639.55 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered dca service started, version 1.8 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xfc00-0xfc1f] pci 0000:00:1a.1: reg 20 io port: [0xf800-0xf81f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xf400-0xf41f] pci 0000:00:1d.1: reg 20 io port: [0xf000-0xf01f] pci 0000:00:1d.2: reg 20 io port: [0xec00-0xec1f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f) pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807] pci 0000:00:1f.2: reg 14 io port: [0xe400-0xe403] pci 0000:00:1f.2: reg 18 io port: [0xe000-0xe007] pci 0000:00:1f.2: reg 1c io port: [0xdc00-0xdc03] pci 0000:00:1f.2: reg 20 io port: [0xd800-0xd81f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffd000-0xfdffd7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfdffc000-0xfdffc0ff] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:00:1f.6: reg 10 64bit mmio: [0xfdffb000-0xfdffbfff] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] pci 0000:01:00.0: reg 24 io port: [0x5c00-0x5c7f] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xfdefc000-0xfdefffff] pci 0000:04:00.0: reg 18 io port: [0x6c00-0x6cff] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xfde00000-0xfdefffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xdbfff000-0xdbfff7ff] pci 0000:05:00.0: reg 14 io port: [0x7c00-0x7c7f] pci 0000:05:00.0: supports D2 pci 0000:05:00.0: PME# supported from D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:02.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff] pci 0000:05:03.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x7000-0x7fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd4000000-0xdbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs *5 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 10 11 12 14 *15) SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:0a: ioport range 0x400-0x4bf could not be reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0xd3000-0xd3fff has been reserved system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved system 00:0d: iomem range 0xfc000-0xfffff could not be reserved system 00:0d: iomem range 0x7ff00000-0x7fffffff could not be reserved system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0d: iomem range 0xfed13000-0xfed1ffff has been reserved system 00:0d: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved system 00:0d: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x5000-0x5fff pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0xa000-0xafff pci 0000:00:1c.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:1c.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.3: IO window: 0x6000-0x6fff pci 0000:00:1c.3: MEM window: 0xfde00000-0xfdefffff pci 0000:00:1c.3: PREFETCH window: 0x000000fdd00000-0x000000fddfffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0x7000-0x7fff pci 0000:00:1e.0: MEM window: 0xd4000000-0xdbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff] pci_bus 0000:04: resource 1 mem: [0xfde00000-0xfdefffff] pci_bus 0000:04: resource 2 pref mem [0xfdd00000-0xfddfffff] pci_bus 0000:05: resource 0 io: [0x7000-0x7fff] pci_bus 0000:05: resource 1 mem: [0xd4000000-0xdbffffff] pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf7ffffff] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Scanning for low memory corruption every 60 seconds HugeTLB registered 2 MB page size, pre-allocated 0 pages SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled msgmni has been set to 4020 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler cfq registered pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.3: setting latency timer to 64 lp: driver loaded but no devices found Generic RTC Driver v1.07 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Platform driver 'serial8250' needs updating - please use dev_pm_ops 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 17 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 17 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 17 ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 17 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata6: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.21, max UDMA/66 ata5.00: configured for UDMA/66 ata2.00: ATA-7: ST3750640NS, 3.BAF, max UDMA/133 ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: ATA-7: ST3750640NS, 3.BAF, max UDMA/133 ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3750640NS 3.BA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) scsi 1:0:0:0: Direct-Access ATA ST3750640NS 3.BA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb1 scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.21 PQ: 0 ANSI: 5 sdb2 sda: sd 1:0:0:0: [sdb] Attached SCSI disk sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sda1 sda2 sr 4:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: [sda] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 2 and added 2 devices. md: autorun ... md: considering sda2 ... md: adding sda2 ... md: adding sdb2 ... md: created md0 md: bind md: bind md: running: raid0: looking at sda2 raid0: comparing sda2(1433013760) with sda2(1433013760) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdb2 raid0: comparing sdb2(1433013760) with sda2(1433013760) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 2866027520 sectors. ******* md0 configuration ********* zone0=[sda2/sdb2/] zone offset=0kb device offset=0kb size=1433013760kb ********************************** md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Freeing unused kernel memory: 352k freed fuse init (API version 7.12) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... md0: ACPI: Invalid PBLK length [0] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PDC] (Node ffff88007f858490), AE_ALREADY_EXISTS ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error unknown partition table processor LNXCPU:00: registered as cooling_device0 input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] ACPI: Invalid PBLK length [0] input: Power Button as /class/input/input1 ACPI: Power Button [PWRB] ACPI: SSDT 000000007fee8750 000CE (v01 PmRef Cpu1Ist 00003000 INTL 20041203) processor LNXCPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (34 C) fan PNP0C0B:00: registered as cooling_device2 ACPI: Fan [FAN] (on) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sky2 driver version 1.23 sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:04:00.0: setting latency timer to 64 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 2 sky2 eth0: addr 00:15:58:8a:ae:e5 firewire_ohci 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 firewire_ohci 0000:05:00.0: setting latency timer to 64 firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fc00 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver sr 4:0:0:0: Attached scsi generic sg2 type 5 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc3-git4 uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f800 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-rc3-git4 uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f400 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31-rc3-git4 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31-rc3-git4 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31-rc3-git4 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 Linux video capture interface: v2.00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: EHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31-rc3-git4 ehci_hcd usb usb6: SerialNumber: 0000:00:1a.7 usb usb6: configuration #1 chosen from 1 choice ivtv: Start initialization, version 1.4.1 ivtv0: Initializing card 0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv 0000:05:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 tveeprom 0-0050: Hauppauge model 32062, rev B185, serial# 2842715 cx18: Start initialization, version 1.2.0 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: EHCI Host Controller usb usb7: Manufacturer: Linux 2.6.31-rc3-git4 ehci_hcd usb usb7: SerialNumber: 0000:00:1d.7 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected firewire_core: created device fw0: GUID 00016c200022ce9e, S400 tveeprom 0-0050: tuner model is TCL 2002N 6A (idx 85, type 50) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP3445 (idx 12) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-250 saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 0-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: msp3400 supports radio, mode is autodetect and autoselect tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tuner-simple 0-0061: creating new instance tuner-simple 0-0061: type set to 50 (TCL 2002N) IRQ 17/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Initialized card: Hauppauge WinTV PVR-250 cx18-0: Initializing card 0 cx18-0: Autodetected Hauppauge card cx18 0000:05:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ivtv: End initialization cx18-0: Unreasonably low latency timer, setting to 64 (was 2) cx18-0: cx23418 revision 01010000 (B) tveeprom 1-0050: Hauppauge model 74551, rev C1A3, serial# 1752579 tveeprom 1-0050: MAC address is 00-0D-FE-1A-BE-03 tveeprom 1-0050: tuner model is TCL MFNM05-4 (idx 103, type 43) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX23418 (idx 38) tveeprom 1-0050: decoder processor is CX23418 (idx 31) tveeprom 1-0050: has radio cx18-0: Autodetected Hauppauge HVR-1600 cx18-0: Simultaneous Digital and Analog TV capture supported IRQ 18/cx18-0: IRQF_DISABLED is not guaranteed on shared IRQs tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1) tda9887 2-0043: creating new instance tda9887 2-0043: tda988[5/6/7] found tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0) tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) cx18-0: Registered device video1 for encoder MPEG (64 x 32 kB) DVB: registering new adapter (cx18) usb 7-5: new high speed USB device using ehci_hcd and address 4 MXL5005S: Attached at address 0x63 DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx18-0: DVB Frontend registered cx18-0: Registered DVB adapter0 for TS (32 x 32 kB) cx18-0: Registered device video33 for encoder YUV (16 x 128 kB) cx18-0: Registered device vbi1 for encoder VBI (20 x 51984 bytes) cx18-0: Registered device video25 for encoder PCM audio (256 x 4 kB) cx18-0: Registered device radio1 for encoder radio cx18-0: Initialized card: Hauppauge HVR-1600 cx18: End initialization usb 7-5: New USB device found, idVendor=058f, idProduct=6254 usb 7-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 7-5: configuration #1 chosen from 1 choice hub 7-5:1.0: USB hub found hub 7-5:1.0: 4 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=15c2, idProduct=ffdc usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: New USB device found, idVendor=046d, idProduct=c51e usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: HID 046d:c51e as /class/input/input2 generic-usb 0003:046D:C51E.0001: input: USB HID v1.11 Keyboard [HID 046d:c51e] on usb-0000:00:1d.0-2/input0 input: HID 046d:c51e as /class/input/input3 generic-usb 0003:046D:C51E.0002: input,hiddev0: USB HID v1.11 Mouse [HID 046d:c51e] on usb-0000:00:1d.0-2/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: New USB device found, idVendor=0403, idProduct=6001 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-2: Product: Frankenswitch Solenoid Controller usb 4-2: Manufacturer: RTR usb 4-2: SerialNumber: A4RGYNGQ usb 4-2: configuration #1 chosen from 1 choice usb 5-2: new low speed USB device using uhci_hcd and address 2 usb 5-2: New USB device found, idVendor=051d, idProduct=0002 usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 5-2: Product: Back-UPS XS 1300 LCD FW:836.H8 .D USB FW:H8 usb 5-2: Manufacturer: American Power Conversion usb 5-2: SerialNumber: BB0820009163 usb 5-2: configuration #1 chosen from 1 choice generic-usb 0003:051D:0002.0003: hiddev1: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1300 LCD FW:836.H8 .D USB FW:H8 ] on usb-0000:00:1d.2-2/input0 usb 7-5.3: new high speed USB device using ehci_hcd and address 6 usb 7-5.3: New USB device found, idVendor=2040, idProduct=7200 usb 7-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=10 usb 7-5.3: Product: WinTV HVR-950 usb 7-5.3: Manufacturer: Hauppauge usb 7-5.3: SerialNumber: 4031688744 usb 7-5.3: configuration #1 chosen from 1 choice au0828 driver loaded au0828: i2c bus registered tveeprom 3-0050: Hauppauge model 72001, rev B3F0, serial# 5156904 tveeprom 3-0050: MAC address is 00-0D-FE-4E-B0-28 tveeprom 3-0050: tuner model is Xceive XC5000 (idx 150, type 76) tveeprom 3-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) tveeprom 3-0050: audio processor is AU8522 (idx 44) tveeprom 3-0050: decoder processor is AU8522 (idx 42) tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter hauppauge_eeprom: hauppauge eeprom: model=72001 au8522 3-0047: creating new instance au8522_decoder creating new instance... tuner 3-0061: chip found @ 0xc2 (au0828) xc5000 3-0061: creating new instance xc5000: Successfully identified at address 0x61 xc5000: Firmware has not been loaded previously au8522 3-0047: attaching existing instance xc5000 3-0061: attaching existing instance xc5000: Successfully identified at address 0x61 xc5000: Firmware has not been loaded previously DVB: registering new adapter (au0828) DVB: registering adapter 1 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)... Registered device AU0828 [Hauppauge HVR950Q] usbcore: registered new interface driver au0828 usbcore: registered new interface driver snd-usb-audio Adding 16064960k swap on /dev/sdb1. Priority:-1 extents:1 across:16064960k EXT3 FS on sda1, internal journal Filesystem "md0": Disabling barriers, trial barrier write failed XFS mounting filesystem md0 Ending clean XFS mount for filesystem: md0 sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both warning: `ntpd' uses 32-bit capabilities (legacy support in use) ata1.00: configured for UDMA/133 ata1: EH complete sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA cx18 0000:05:03.0: firmware: requesting v4l-cx23418-cpu.fw cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) cx18 0000:05:03.0: firmware: requesting v4l-cx23418-apu.fw cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) cx18 0000:05:03.0: firmware: requesting v4l-cx23418-cpu.fw cx18 0000:05:03.0: firmware: requesting v4l-cx23418-apu.fw cx18 0000:05:03.0: firmware: requesting v4l-cx23418-dig.fw cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes) cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes) ivtv 0000:05:02.0: firmware: requesting v4l-cx2341x-enc.fw ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 input: i2c IR (Hauppauge) as /class/input/input4 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [ivtv i2c driver #0] RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... usb 7-5.3: firmware: requesting dvb-fe-xc5000-1.6.114.fw xc5000: firmware read 12401 bytes. xc5000: firmware uploading... ata2.00: configured for UDMA/133 ata2: EH complete ata1.00: configured for UDMA/133 ata1: EH complete xc5000: firmware upload complete... nvidia: module license 'NVIDIA' taints kernel. nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009 input: i2c IR (Hauppauge) as /class/input/input5 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [ivtv i2c driver #0] input: i2c IR (Hauppauge) as /class/input/input6 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [ivtv i2c driver #0] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... usb 7-5.3: firmware: requesting dvb-fe-xc5000-1.6.114.fw xc5000: firmware read 12401 bytes. xc5000: firmware uploading... xc5000: firmware upload complete...