Terratec Cinergy HibridT XS

Terratec Cinergy HibridT XS

[Valerio Messina]

hi all,

I own a Terratec Cinergy HibridT XS
with lsusb ID:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS

With past kernel and a patch as suggested here:
http://www.linuxtv.org/wiki/index.php/TerraTec
that link to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
that link to:
http://mcentral.de/wiki/index.php5/Main_Page
and some troubles for Ubuntu kernel that I solved here:
https://bugs.launchpad.net/bugs/322732
worked well for a year or more.

With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for 
the tuner, but from dmesg a file is missing: xc3028-v27.fw
(maybe manage I2C for IR?)
I found it on a web site, copied in /lib/firmware
and now Kaffeine work, but ... no more IR remote command work.

More bad now:
http://mcentral.de/wiki/index.php5/Installation_Guide
sell TV tuner, and do not support anymore the Terratec tuner, the source 
repository is disappeared, and install instruction is a commercial.


Any chanches?

thanks in advace,
Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Tue, Jul 28, 2009 at 7:32 PM, Valerio Messina<efa@iol.it> wrote:
> hi all,
>
> I own a Terratec Cinergy HibridT XS
> with lsusb ID:
> Bus 001 Device 007:
> ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
>
> With past kernel and a patch as suggested here:
> http://www.linuxtv.org/wiki/index.php/TerraTec
> that link to:
> http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
> that link to:
> http://mcentral.de/wiki/index.php5/Main_Page
> and some troubles for Ubuntu kernel that I solved here:
> https://bugs.launchpad.net/bugs/322732
> worked well for a year or more.
>
> With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the
> tuner, but from dmesg a file is missing: xc3028-v27.fw
> (maybe manage I2C for IR?)
> I found it on a web site, copied in /lib/firmware
> and now Kaffeine work, but ... no more IR remote command work.
>
> More bad now:
> http://mcentral.de/wiki/index.php5/Installation_Guide
> sell TV tuner, and do not support anymore the Terratec tuner, the source
> repository is disappeared, and install instruction is a commercial.
>
>
> Any chanches?
>
> thanks in advace,
> Valerio

That device, including full support for the IR, is now supported in
the mainline v4l-dvb tree (and will appear in kernel 2.6.31).  Just
follow the directions here to get the code:

http://linuxtv.org/repo

Devin


-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[hermann pitton]

Hi,

Am Dienstag, den 28.07.2009, 20:44 -0400 schrieb Devin Heitmueller:
> On Tue, Jul 28, 2009 at 7:32 PM, Valerio Messina<efa@iol.it> wrote:
> > hi all,
> >
> > I own a Terratec Cinergy HibridT XS
> > with lsusb ID:
> > Bus 001 Device 007:
> > ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
> >
> > With past kernel and a patch as suggested here:
> > http://www.linuxtv.org/wiki/index.php/TerraTec
> > that link to:
> > http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
> > that link to:
> > http://mcentral.de/wiki/index.php5/Main_Page
> > and some troubles for Ubuntu kernel that I solved here:
> > https://bugs.launchpad.net/bugs/322732
> > worked well for a year or more.
> >
> > With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the
> > tuner, but from dmesg a file is missing: xc3028-v27.fw
> > (maybe manage I2C for IR?)
> > I found it on a web site, copied in /lib/firmware
> > and now Kaffeine work, but ... no more IR remote command work.
> >
> > More bad now:
> > http://mcentral.de/wiki/index.php5/Installation_Guide
> > sell TV tuner, and do not support anymore the Terratec tuner, the source
> > repository is disappeared, and install instruction is a commercial.

all in all it is really funny.

> > Any chanches?
> >
> > thanks in advace,
> > Valerio
> 
> That device, including full support for the IR, is now supported in
> the mainline v4l-dvb tree (and will appear in kernel 2.6.31).  Just
> follow the directions here to get the code:
> 
> http://linuxtv.org/repo
> 
> Devin
> 

Hopefully nobody is mad enough to buy for such prices.

Cheers,
Hermann

Re: Terratec Cinergy HibridT XS

[Markus Rechberger]

On Wed, Jul 29, 2009 at 4:28 AM, hermann pitton<hermann-pitton@arcor.de> wrote:
> Hi,
>
> Am Dienstag, den 28.07.2009, 20:44 -0400 schrieb Devin Heitmueller:
>> On Tue, Jul 28, 2009 at 7:32 PM, Valerio Messina<efa@iol.it> wrote:
>> > hi all,
>> >
>> > I own a Terratec Cinergy HibridT XS
>> > with lsusb ID:
>> > Bus 001 Device 007:
>> > ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
>> >
>> > With past kernel and a patch as suggested here:
>> > http://www.linuxtv.org/wiki/index.php/TerraTec
>> > that link to:
>> > http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
>> > that link to:
>> > http://mcentral.de/wiki/index.php5/Main_Page
>> > and some troubles for Ubuntu kernel that I solved here:
>> > https://bugs.launchpad.net/bugs/322732
>> > worked well for a year or more.
>> >
>> > With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the
>> > tuner, but from dmesg a file is missing: xc3028-v27.fw
>> > (maybe manage I2C for IR?)
>> > I found it on a web site, copied in /lib/firmware
>> > and now Kaffeine work, but ... no more IR remote command work.
>> >
>> > More bad now:
>> > http://mcentral.de/wiki/index.php5/Installation_Guide
>> > sell TV tuner, and do not support anymore the Terratec tuner, the source
>> > repository is disappeared, and install instruction is a commercial.
>
> all in all it is really funny.
>
>> > Any chanches?
>> >
>> > thanks in advace,
>> > Valerio
>>
>> That device, including full support for the IR, is now supported in
>> the mainline v4l-dvb tree (and will appear in kernel 2.6.31).  Just
>> follow the directions here to get the code:
>>
>> http://linuxtv.org/repo
>>
>> Devin
>>
>
> Hopefully nobody is mad enough to buy for such prices.
>

compared with other drivers it has some big advantages, eg. automatic
audio routing (supports OSS/Alsa/reading audio external) - as tvtime
doesn't support audio at all our solution automatically enables audio
with it, installation works within a few seconds (everywhere, any
distribution, eg eeepc, acer aspire one, ubuntu, redhat, suse..),
kernel independent, more or less unix operating system independent as
well.
There's nothing comparable available, and it has full support from the
chipdesign companies, just about anyone who doesn't know much about
linux can easily handle it without the knowledge how to set up a
development system. CI Support is on the roadmap as well for DVB-C.
While all of that it is still compatible to existing kernel drivers.
Updates will also affect all systems at once and won't need a
particular kernel versions.
So it is more like a question if someone wants a prebuilt, working car
which has guaranteed support, or wants to build his own car both is
doable of course.

Best Regards,
Markus

Re: Terratec Cinergy HibridT XS

[Simon Kenyon]

Markus Rechberger wrote:
> compared with other drivers it has some big advantages, eg. automatic
> audio routing (supports OSS/Alsa/reading audio external) - as tvtime
> doesn't support audio at all our solution automatically enables audio
> with it, installation works within a few seconds (everywhere, any
> distribution, eg eeepc, acer aspire one, ubuntu, redhat, suse..),
> kernel independent, more or less unix operating system independent as
> well.
> There's nothing comparable available, and it has full support from the
> chipdesign companies, just about anyone who doesn't know much about
> linux can easily handle it without the knowledge how to set up a
> development system. CI Support is on the roadmap as well for DVB-C.
> While all of that it is still compatible to existing kernel drivers.
> Updates will also affect all systems at once and won't need a
> particular kernel versions.
> So it is more like a question if someone wants a prebuilt, working car
> which has guaranteed support, or wants to build his own car both is
> doable of course.
>
> Best Regards,
>
> Markus

spam is not appreciated on this mailing list

Re: Terratec Cinergy HibridT XS

[hermann pitton]

Hi,

Am Mittwoch, den 29.07.2009, 07:45 +0200 schrieb Markus Rechberger:
> On Wed, Jul 29, 2009 at 4:28 AM, hermann pitton<hermann-pitton@arcor.de> wrote:
> > Hi,
> >
> > Am Dienstag, den 28.07.2009, 20:44 -0400 schrieb Devin Heitmueller:
> >> On Tue, Jul 28, 2009 at 7:32 PM, Valerio Messina<efa@iol.it> wrote:
> >> > hi all,
> >> >
> >> > I own a Terratec Cinergy HibridT XS
> >> > with lsusb ID:
> >> > Bus 001 Device 007:
> >> > ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
> >> >
> >> > With past kernel and a patch as suggested here:
> >> > http://www.linuxtv.org/wiki/index.php/TerraTec
> >> > that link to:
> >> > http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
> >> > that link to:
> >> > http://mcentral.de/wiki/index.php5/Main_Page
> >> > and some troubles for Ubuntu kernel that I solved here:
> >> > https://bugs.launchpad.net/bugs/322732
> >> > worked well for a year or more.
> >> >
> >> > With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the
> >> > tuner, but from dmesg a file is missing: xc3028-v27.fw
> >> > (maybe manage I2C for IR?)
> >> > I found it on a web site, copied in /lib/firmware
> >> > and now Kaffeine work, but ... no more IR remote command work.
> >> >
> >> > More bad now:
> >> > http://mcentral.de/wiki/index.php5/Installation_Guide
> >> > sell TV tuner, and do not support anymore the Terratec tuner, the source
> >> > repository is disappeared, and install instruction is a commercial.
> >
> > all in all it is really funny.
> >
> >> > Any chanches?
> >> >
> >> > thanks in advace,
> >> > Valerio
> >>
> >> That device, including full support for the IR, is now supported in
> >> the mainline v4l-dvb tree (and will appear in kernel 2.6.31).  Just
> >> follow the directions here to get the code:
> >>
> >> http://linuxtv.org/repo
> >>
> >> Devin
> >>
> >
> > Hopefully nobody is mad enough to buy for such prices.
> >
> 
> compared with other drivers it has some big advantages, eg. automatic
> audio routing (supports OSS/Alsa/reading audio external) - as tvtime
> doesn't support audio at all our solution automatically enables audio
> with it, installation works within a few seconds (everywhere, any
> distribution, eg eeepc, acer aspire one, ubuntu, redhat, suse..),
> kernel independent, more or less unix operating system independent as
> well.

I really would like to have Billy Biggs opinion on that.

> There's nothing comparable available, and it has full support from the
> chipdesign companies, just about anyone who doesn't know much about
> linux can easily handle it without the knowledge how to set up a
> development system. CI Support is on the roadmap as well for DVB-C.
> While all of that it is still compatible to existing kernel drivers.
> Updates will also affect all systems at once and won't need a
> particular kernel versions.
> So it is more like a question if someone wants a prebuilt, working car
> which has guaranteed support, or wants to build his own car both is
> doable of course.

You are using other peoples cars and without those, there is nothing.

Cheers,
Hermann

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

>> With past kernel and a patch as suggested here:
>> http://www.linuxtv.org/wiki/index.php/TerraTec
>> that link to:
>> http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
>> that link to:
>> http://mcentral.de/wiki/index.php5/Main_Page
 >> More bad now:
 >> http://mcentral.de/wiki/index.php5/Installation_Guide
 >> sell TV tuner, and do not support anymore the Terratec tuner, the source
 >> repository is disappeared, and install instruction is a commercial.

I do not know if is correct that linuxtv.org link to a web site with 
unsupported product/commercial.
Please change the link in page:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS

>> and some troubles for Ubuntu kernel that I solved here:
>> https://bugs.launchpad.net/bugs/322732
>> worked well for a year or more.

the Ubuntu kernel bug is fixed in 9.04

Devin Heitmueller ha scritto:
> That device, including full support for the IR, is now supported in
> the mainline v4l-dvb tree (and will appear in kernel 2.6.31).  Just
> follow the directions here to get the code:
> http://linuxtv.org/repo

yesterday evening I downloaded the sources with mercurial, compiled and 
installed.
Same result, from dmesg the firmware file 'xc3028-v27.fw' is missing.
When I put it in /lib/firmware Kaffeine video/audio work, but no IR.

ready to help in debugging,
Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Thu, Jul 30, 2009 at 2:42 AM, Valerio Messina<efa@iol.it> wrote:
 yesterday evening I downloaded the sources with mercurial, compiled and
> installed.
> Same result, from dmesg the firmware file 'xc3028-v27.fw' is missing.
> When I put it in /lib/firmware Kaffeine video/audio work, but no IR.
>
> ready to help in debugging,
> Valerio

You are correct that you will continue to see the message about
'xc3028-v27.fw' being missing until you install the firmware.  We do
not currently have the rights to redistribute it, which is why you
have to install it manually.

How are you testing the IR support?  And are you using the Terratec
remote control that came with the product?  Have you tried opening a
text editor, hitting the "1" key, and seeing if the character appears?

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> How are you testing the IR support?

starting Kaffeine with a Digital TV channel, pressing numeric key of the 
remote in front of IR receiver connected to Terratec Cinergy Hybrid T XS.

> And are you using the Terratec
> remote control that came with the product?

yes, the one showed in this picture:
http://www.terratec.it/prodotti/schede_tv/TerraTec%20Cinergy%20Hybrid%20T%20USB%20XS/CinergyHybridTUSBXSscope.jpg

> Have you tried opening a
> text editor, hitting the "1" key, and seeing if the character appears?

I tried last evening, and no, does not appear any digit.

My lsusb ID is:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS

Note: with Ubuntu 8.04 K2.6.24-21-generic the TV and IR always worked.
With Ubuntu 8.10 and kernel
2.6.27.7-generic, 2.6.27.9-generic, 2.6.27.11-generic, 2.6.27-14-generic
I needed to add some media Kheaders, but then TV and IR always worked.
The problem appear just after upgrade to Ubuntu 9.04 kernel
2.6.28-13-generic and happen the same for 2.6.28-14-generic

Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Fri, Jul 31, 2009 at 2:37 AM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller ha scritto:
>>
>> How are you testing the IR support?
>
> starting Kaffeine with a Digital TV channel, pressing numeric key of the
> remote in front of IR receiver connected to Terratec Cinergy Hybrid T XS.
>
>> And are you using the Terratec
>> remote control that came with the product?
>
> yes, the one showed in this picture:
> http://www.terratec.it/prodotti/schede_tv/TerraTec%20Cinergy%20Hybrid%20T%20USB%20XS/CinergyHybridTUSBXSscope.jpg
>
>> Have you tried opening a
>> text editor, hitting the "1" key, and seeing if the character appears?
>
> I tried last evening, and no, does not appear any digit.
>
> My lsusb ID is:
> Bus 001 Device 007:
> ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
>
> Note: with Ubuntu 8.04 K2.6.24-21-generic the TV and IR always worked.
> With Ubuntu 8.10 and kernel
> 2.6.27.7-generic, 2.6.27.9-generic, 2.6.27.11-generic, 2.6.27-14-generic
> I needed to add some media Kheaders, but then TV and IR always worked.
> The problem appear just after upgrade to Ubuntu 9.04 kernel
> 2.6.28-13-generic and happen the same for 2.6.28-14-generic
>
> Valerio

I'm quite confident that it wasn't working in 8.04/8.10 with the stock
kernel, given I spent every night for several weeks getting support
for both variants of the device to work using hardware sent to me by a
user.  And I had to create an IR profile for the remote control from
scratch.

That said, the root of the problem seems to be that the IR support I
wrote didn't find its way upstream.  I can only assume that I lost the
patch when I was redoing my hg tree for submission.

I will look around and see if I can find a backup of the old tree.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Fri, Jul 31, 2009 at 2:37 AM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller ha scritto:
>>
>> How are you testing the IR support?
>
> starting Kaffeine with a Digital TV channel, pressing numeric key of the
> remote in front of IR receiver connected to Terratec Cinergy Hybrid T XS.
>
>> And are you using the Terratec
>> remote control that came with the product?
>
> yes, the one showed in this picture:
> http://www.terratec.it/prodotti/schede_tv/TerraTec%20Cinergy%20Hybrid%20T%20USB%20XS/CinergyHybridTUSBXSscope.jpg
>
>> Have you tried opening a
>> text editor, hitting the "1" key, and seeing if the character appears?
>
> I tried last evening, and no, does not appear any digit.
>
> My lsusb ID is:
> Bus 001 Device 007:
> ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
>
> Note: with Ubuntu 8.04 K2.6.24-21-generic the TV and IR always worked.
> With Ubuntu 8.10 and kernel
> 2.6.27.7-generic, 2.6.27.9-generic, 2.6.27.11-generic, 2.6.27-14-generic
> I needed to add some media Kheaders, but then TV and IR always worked.
> The problem appear just after upgrade to Ubuntu 9.04 kernel
> 2.6.28-13-generic and happen the same for 2.6.28-14-generic
>
> Valerio
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Ah, good news:  the patch I wrote that adds support for the remote
control is still around:

http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68

I will prep this into a new tree and issue a pull request when I get
back in town on Sunday.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> Ah, good news:  the patch I wrote that adds support for the remote
> control is still around:
> 
> http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
> 
> I will prep this into a new tree and issue a pull request when I get
> back in town on Sunday.

hi,
I tried to apply the patch, recompile, install and reboot.
Same results, IR does not send digit to text editor or Kaffeine.

What other can I do for further help/testing?

Valerio

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Valerio Messina ha scritto:
> Devin Heitmueller ha scritto:
>> Ah, good news:  the patch I wrote that adds support for the remote
>> control is still around:
>>
>> http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
>>
>> I will prep this into a new tree and issue a pull request when I get
>> back in town on Sunday.
> 
> hi,
> I tried to apply the patch, recompile, install and reboot.
> Same results, IR does not send digit to text editor or Kaffeine.
> 
> What other can I do for further help/testing?

I tried another thing.
I unzipped a 2009-01-29 version of
http://mcentral.de/hg/~mrec/v4l-dvb-kernel
the last I used on Ubuntu 8.10, not really updated but worked,
recompiled for the new Ubuntu kernel
2.6.28-14-generic
install and reboot.
This one work, IR send digit to text editor and Kaffeine.
Now I remember, with past Ubuntu version I used mcentral modules, and 
not linuxtv ones. This is why IR worked for me.

I uploaded this shot of the disappeared mercurial repositories here:
http://sharebee.com/fed68f5f
all in all is all GPL code.

I looked at the code, and see that 'v4l-dvb-kernel' consist of less 
files, in particular are 296 files, while 'v4l-dvb' are 7916, probably 
because there are only em28xx related files.
The source tree have some different organization.
I see that:
v4l-dvb/linux/include/media/ir-common.h
and
v4l-dvb/linux/drivers/media/common/ir-keymaps.c
does not exist

v4l-dvb/linux/drivers/media/video/em28xx/em28xx-cards.c
is located here:
v4l-dvb-kernel/em28xx-cards.c
and diff report lot lot of differencies.

hope this helps integrating IR support,
Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Sat, Aug 1, 2009 at 6:48 PM, Valerio Messina<efa@iol.it> wrote:
> Valerio Messina ha scritto:
>>
>> Devin Heitmueller ha scritto:
>>>
>>> Ah, good news:  the patch I wrote that adds support for the remote
>>> control is still around:
>>>
>>> http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
>>>
>>> I will prep this into a new tree and issue a pull request when I get
>>> back in town on Sunday.
>>
>> hi,
>> I tried to apply the patch, recompile, install and reboot.
>> Same results, IR does not send digit to text editor or Kaffeine.
>>
>> What other can I do for further help/testing?
>
> I tried another thing.
> I unzipped a 2009-01-29 version of
> http://mcentral.de/hg/~mrec/v4l-dvb-kernel
> the last I used on Ubuntu 8.10, not really updated but worked,
> recompiled for the new Ubuntu kernel
> 2.6.28-14-generic
> install and reboot.
> This one work, IR send digit to text editor and Kaffeine.
> Now I remember, with past Ubuntu version I used mcentral modules, and not
> linuxtv ones. This is why IR worked for me.
>
> I uploaded this shot of the disappeared mercurial repositories here:
> http://sharebee.com/fed68f5f
> all in all is all GPL code.
>
> I looked at the code, and see that 'v4l-dvb-kernel' consist of less files,
> in particular are 296 files, while 'v4l-dvb' are 7916, probably because
> there are only em28xx related files.
> The source tree have some different organization.
> I see that:
> v4l-dvb/linux/include/media/ir-common.h
> and
> v4l-dvb/linux/drivers/media/common/ir-keymaps.c
> does not exist
>
> v4l-dvb/linux/drivers/media/video/em28xx/em28xx-cards.c
> is located here:
> v4l-dvb-kernel/em28xx-cards.c
> and diff report lot lot of differencies.
>
> hope this helps integrating IR support,
> Valerio
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Valerio,

I'll get my patched merged (and make sure I didn't miss something).
There is no need for the mcentral.de tree.

I had the whole thing working so perhaps the code that enabled the IR
support was in a separate patch.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Fri, Jul 31, 2009 at 9:43 PM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller ha scritto:
>>
>> Ah, good news:  the patch I wrote that adds support for the remote
>> control is still around:
>>
>> http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
>>
>> I will prep this into a new tree and issue a pull request when I get
>> back in town on Sunday.
>
> hi,
> I tried to apply the patch, recompile, install and reboot.
> Same results, IR does not send digit to text editor or Kaffeine.
>
> What other can I do for further help/testing?
>
> Valerio
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Hello Valerio,

Please try the following:

hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
make install
reboot

Then see if the remote control works.  If not, I will give you some
commands to turn on the logging.  This should work though since I had
tested it myself when I had the device in question a couple of weeks
ago.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> Please try the following:
> hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
> cd ttxs-remote
> make
> make install
> reboot
> 
> Then see if the remote control works.  If not, I will give you some
> commands to turn on the logging.  This should work though since I had
> tested it myself when I had the device in question a couple of weeks
> ago.

with this repository compiled, installed and after reboot, Kaffeine does 
not see at all the TV tuner.
Logging instructions are always welcomed.
Valerio

dmesg report this log when I connect the USB tuner:

Aug  5 08:46:31 01ath3200 kernel: [  365.276042] usb 1-3: new high speed 
USB device using ehci_hcd and address 4
Aug  5 08:46:31 01ath3200 kernel: [  365.458835] usb 1-3: configuration 
#1 chosen from 1 choice
Aug  5 08:46:31 01ath3200 kernel: [  365.474488] Linux video capture 
interface: v2.00
Aug  5 08:46:31 01ath3200 kernel: [  365.523111] em28xx: disagrees about 
version of symbol v4l_compat_translate_ioctl
Aug  5 08:46:31 01ath3200 kernel: [  365.523122] em28xx: Unknown symbol 
v4l_compat_translate_ioctl
Aug  5 08:46:31 01ath3200 kernel: [  365.525987] em28xx: disagrees about 
version of symbol video_unregister_device
Aug  5 08:46:31 01ath3200 kernel: [  365.525992] em28xx: Unknown symbol 
video_unregister_device
Aug  5 08:46:31 01ath3200 kernel: [  365.526369] em28xx: disagrees about 
version of symbol video_device_alloc
Aug  5 08:46:31 01ath3200 kernel: [  365.526374] em28xx: Unknown symbol 
video_device_alloc
Aug  5 08:46:31 01ath3200 kernel: [  365.526559] em28xx: disagrees about 
version of symbol video_register_device
Aug  5 08:46:31 01ath3200 kernel: [  365.526564] em28xx: Unknown symbol 
video_register_device
Aug  5 08:46:31 01ath3200 kernel: [  365.527584] em28xx: disagrees about 
version of symbol video_usercopy
Aug  5 08:46:31 01ath3200 kernel: [  365.527589] em28xx: Unknown symbol 
video_usercopy
Aug  5 08:46:31 01ath3200 kernel: [  365.527774] em28xx: disagrees about 
version of symbol video_device_release
Aug  5 08:46:31 01ath3200 kernel: [  365.527779] em28xx: Unknown symbol 
video_device_release
Aug  5 08:46:32 01ath3200 pulseaudio[4176]: alsa-util.c: Cannot find 
fallback mixer control "Mic" or mixer control is no combination of 
switch/volume.

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Wed, Aug 5, 2009 at 3:17 AM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller ha scritto:
>>
>> Please try the following:
>> hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
>> cd ttxs-remote
>> make
>> make install
>> reboot
>>
>> Then see if the remote control works.  If not, I will give you some
>> commands to turn on the logging.  This should work though since I had
>> tested it myself when I had the device in question a couple of weeks
>> ago.
>
> with this repository compiled, installed and after reboot, Kaffeine does not
> see at all the TV tuner.
> Logging instructions are always welcomed.
> Valerio
>
> dmesg report this log when I connect the USB tuner:
>
> Aug  5 08:46:31 01ath3200 kernel: [  365.276042] usb 1-3: new high speed USB
> device using ehci_hcd and address 4
> Aug  5 08:46:31 01ath3200 kernel: [  365.458835] usb 1-3: configuration #1
> chosen from 1 choice
> Aug  5 08:46:31 01ath3200 kernel: [  365.474488] Linux video capture
> interface: v2.00
> Aug  5 08:46:31 01ath3200 kernel: [  365.523111] em28xx: disagrees about
> version of symbol v4l_compat_translate_ioctl
> Aug  5 08:46:31 01ath3200 kernel: [  365.523122] em28xx: Unknown symbol
> v4l_compat_translate_ioctl
> Aug  5 08:46:31 01ath3200 kernel: [  365.525987] em28xx: disagrees about
> version of symbol video_unregister_device
> Aug  5 08:46:31 01ath3200 kernel: [  365.525992] em28xx: Unknown symbol
> video_unregister_device
> Aug  5 08:46:31 01ath3200 kernel: [  365.526369] em28xx: disagrees about
> version of symbol video_device_alloc
> Aug  5 08:46:31 01ath3200 kernel: [  365.526374] em28xx: Unknown symbol
> video_device_alloc
> Aug  5 08:46:31 01ath3200 kernel: [  365.526559] em28xx: disagrees about
> version of symbol video_register_device
> Aug  5 08:46:31 01ath3200 kernel: [  365.526564] em28xx: Unknown symbol
> video_register_device
> Aug  5 08:46:31 01ath3200 kernel: [  365.527584] em28xx: disagrees about
> version of symbol video_usercopy
> Aug  5 08:46:31 01ath3200 kernel: [  365.527589] em28xx: Unknown symbol
> video_usercopy
> Aug  5 08:46:31 01ath3200 kernel: [  365.527774] em28xx: disagrees about
> version of symbol video_device_release
> Aug  5 08:46:31 01ath3200 kernel: [  365.527779] em28xx: Unknown symbol
> video_device_release
> Aug  5 08:46:32 01ath3200 pulseaudio[4176]: alsa-util.c: Cannot find
> fallback mixer control "Mic" or mixer control is no combination of
> switch/volume.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Seems like your compile environment got messed up somehow.  Which
distro is this, and have you updated the kernel since checking out the
code?  It's also possible if you were playing around with the mcentral
repository that both versions of em28xx are still installed.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Mauro Carvalho Chehab]

Em Wed, 5 Aug 2009 09:27:13 -0400
Devin Heitmueller <dheitmueller@kernellabs.com> escreveu:

> On Wed, Aug 5, 2009 at 3:17 AM, Valerio Messina<efa@iol.it> wrote:
> > Devin Heitmueller ha scritto:
> >>
> >> Please try the following:
> >> hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
> >> cd ttxs-remote
> >> make
> >> make install
> >> reboot
> >>
> >> Then see if the remote control works.  If not, I will give you some
> >> commands to turn on the logging.  This should work though since I had
> >> tested it myself when I had the device in question a couple of weeks
> >> ago.
> >
> > with this repository compiled, installed and after reboot, Kaffeine does not
> > see at all the TV tuner.
> > Logging instructions are always welcomed.
> > Valerio
> >
> > dmesg report this log when I connect the USB tuner:
> >
> > Aug  5 08:46:31 01ath3200 kernel: [  365.276042] usb 1-3: new high speed USB
> > device using ehci_hcd and address 4
> > Aug  5 08:46:31 01ath3200 kernel: [  365.458835] usb 1-3: configuration #1
> > chosen from 1 choice
> > Aug  5 08:46:31 01ath3200 kernel: [  365.474488] Linux video capture
> > interface: v2.00
> > Aug  5 08:46:31 01ath3200 kernel: [  365.523111] em28xx: disagrees about
> > version of symbol v4l_compat_translate_ioctl
> > Aug  5 08:46:31 01ath3200 kernel: [  365.523122] em28xx: Unknown symbol
> > v4l_compat_translate_ioctl
> > Aug  5 08:46:31 01ath3200 kernel: [  365.525987] em28xx: disagrees about
> > version of symbol video_unregister_device
> > Aug  5 08:46:31 01ath3200 kernel: [  365.525992] em28xx: Unknown symbol
> > video_unregister_device
> > Aug  5 08:46:31 01ath3200 kernel: [  365.526369] em28xx: disagrees about
> > version of symbol video_device_alloc
> > Aug  5 08:46:31 01ath3200 kernel: [  365.526374] em28xx: Unknown symbol
> > video_device_alloc
> > Aug  5 08:46:31 01ath3200 kernel: [  365.526559] em28xx: disagrees about
> > version of symbol video_register_device
> > Aug  5 08:46:31 01ath3200 kernel: [  365.526564] em28xx: Unknown symbol
> > video_register_device
> > Aug  5 08:46:31 01ath3200 kernel: [  365.527584] em28xx: disagrees about
> > version of symbol video_usercopy
> > Aug  5 08:46:31 01ath3200 kernel: [  365.527589] em28xx: Unknown symbol
> > video_usercopy
> > Aug  5 08:46:31 01ath3200 kernel: [  365.527774] em28xx: disagrees about
> > version of symbol video_device_release
> > Aug  5 08:46:31 01ath3200 kernel: [  365.527779] em28xx: Unknown symbol
> > video_device_release
> > Aug  5 08:46:32 01ath3200 pulseaudio[4176]: alsa-util.c: Cannot find
> > fallback mixer control "Mic" or mixer control is no combination of
> > switch/volume.
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-media" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> Seems like your compile environment got messed up somehow.  Which
> distro is this, and have you updated the kernel since checking out the
> code?  It's also possible if you were playing around with the mcentral
> repository that both versions of em28xx are still installed.

Try a make rminstall. This is required with Ubuntu, since it installs
drivers/media at the wrong dir



Cheers,
Mauro

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller wrote:
> Which distro is this

Ubuntu 9.04
kernel 2.6.28-14-generic

> and have you updated the kernel since checking out the code?

no

> It's also possible if you were playing around with the mcentral
> repository that both versions of em28xx are still installed.

Mauro Carvalho Chehab wrote:
> Try a make rminstall. This is required with Ubuntu, since it installs
> drivers/media at the wrong dir

I disconnected the TV tuner, then
$ sudo make unload
$ sudo make rminstall
in the three following subdirectories:
v4l-dvb
v4l-dvb-kernel  (mcentral hg copy)
ttxs-remote

Then follow instructions from Devin:
hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
sudo make install
reboot

No error on compile and install time.
But same results, Kaffeine do not see the TVtuner, and dmesg report this 
on USB connect:

Aug  5 20:12:16 01ath3200 kernel: [  182.312039] usb 1-3: new high speed 
USB device using ehci_hcd and address 3
Aug  5 20:12:16 01ath3200 kernel: [  182.497009] usb 1-3: configuration 
#1 chosen from 1 choice
Aug  5 20:12:16 01ath3200 kernel: [  182.622103] usbcore: registered new 
interface driver snd-usb-audio
Aug  5 20:12:17 01ath3200 kernel: [  182.810124] Linux video capture 
interface: v2.00
Aug  5 20:12:17 01ath3200 kernel: [  182.831714] em28xx: disagrees about 
version of symbol v4l_compat_translate_ioctl
Aug  5 20:12:17 01ath3200 kernel: [  182.831725] em28xx: Unknown symbol 
v4l_compat_translate_ioctl
Aug  5 20:12:17 01ath3200 kernel: [  182.835363] em28xx: disagrees about 
version of symbol video_unregister_device
Aug  5 20:12:17 01ath3200 kernel: [  182.835370] em28xx: Unknown symbol 
video_unregister_device
Aug  5 20:12:17 01ath3200 kernel: [  182.835754] em28xx: disagrees about 
version of symbol video_device_alloc
Aug  5 20:12:17 01ath3200 kernel: [  182.835759] em28xx: Unknown symbol 
video_device_alloc
Aug  5 20:12:17 01ath3200 kernel: [  182.835944] em28xx: disagrees about 
version of symbol video_register_device
Aug  5 20:12:17 01ath3200 kernel: [  182.835949] em28xx: Unknown symbol 
video_register_device
Aug  5 20:12:17 01ath3200 kernel: [  182.836988] em28xx: disagrees about 
version of symbol video_usercopy
Aug  5 20:12:17 01ath3200 kernel: [  182.836993] em28xx: Unknown symbol 
video_usercopy
Aug  5 20:12:17 01ath3200 kernel: [  182.837178] em28xx: disagrees about 
version of symbol video_device_release
Aug  5 20:12:17 01ath3200 kernel: [  182.837183] em28xx: Unknown symbol 
video_device_release
... (repeated 3 times)
Aug  5 20:12:18 01ath3200 pulseaudio[4364]: alsa-util.c: Cannot find 
fallback mixer control "Mic" or mixer control is no combination of 
switch/volume.

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Wed, Aug 5, 2009 at 2:26 PM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller wrote:
>>
>> Which distro is this
>
> Ubuntu 9.04
> kernel 2.6.28-14-generic
>
>> and have you updated the kernel since checking out the code?
>
> no
>
>> It's also possible if you were playing around with the mcentral
>> repository that both versions of em28xx are still installed.
>
> Mauro Carvalho Chehab wrote:
>>
>> Try a make rminstall. This is required with Ubuntu, since it installs
>> drivers/media at the wrong dir
>
> I disconnected the TV tuner, then
> $ sudo make unload
> $ sudo make rminstall
> in the three following subdirectories:
> v4l-dvb
> v4l-dvb-kernel  (mcentral hg copy)
> ttxs-remote
>
> Then follow instructions from Devin:
> hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
> cd ttxs-remote
> make
> sudo make install
> reboot
>
> No error on compile and install time.
> But same results, Kaffeine do not see the TVtuner, and dmesg report this on
> USB connect:
>
> Aug  5 20:12:16 01ath3200 kernel: [  182.312039] usb 1-3: new high speed USB
> device using ehci_hcd and address 3
> Aug  5 20:12:16 01ath3200 kernel: [  182.497009] usb 1-3: configuration #1
> chosen from 1 choice
> Aug  5 20:12:16 01ath3200 kernel: [  182.622103] usbcore: registered new
> interface driver snd-usb-audio
> Aug  5 20:12:17 01ath3200 kernel: [  182.810124] Linux video capture
> interface: v2.00
> Aug  5 20:12:17 01ath3200 kernel: [  182.831714] em28xx: disagrees about
> version of symbol v4l_compat_translate_ioctl
> Aug  5 20:12:17 01ath3200 kernel: [  182.831725] em28xx: Unknown symbol
> v4l_compat_translate_ioctl
> Aug  5 20:12:17 01ath3200 kernel: [  182.835363] em28xx: disagrees about
> version of symbol video_unregister_device
> Aug  5 20:12:17 01ath3200 kernel: [  182.835370] em28xx: Unknown symbol
> video_unregister_device
> Aug  5 20:12:17 01ath3200 kernel: [  182.835754] em28xx: disagrees about
> version of symbol video_device_alloc
> Aug  5 20:12:17 01ath3200 kernel: [  182.835759] em28xx: Unknown symbol
> video_device_alloc
> Aug  5 20:12:17 01ath3200 kernel: [  182.835944] em28xx: disagrees about
> version of symbol video_register_device
> Aug  5 20:12:17 01ath3200 kernel: [  182.835949] em28xx: Unknown symbol
> video_register_device
> Aug  5 20:12:17 01ath3200 kernel: [  182.836988] em28xx: disagrees about
> version of symbol video_usercopy
> Aug  5 20:12:17 01ath3200 kernel: [  182.836993] em28xx: Unknown symbol
> video_usercopy
> Aug  5 20:12:17 01ath3200 kernel: [  182.837178] em28xx: disagrees about
> version of symbol video_device_release
> Aug  5 20:12:17 01ath3200 kernel: [  182.837183] em28xx: Unknown symbol
> video_device_release
> ... (repeated 3 times)
> Aug  5 20:12:18 01ath3200 pulseaudio[4364]: alsa-util.c: Cannot find
> fallback mixer control "Mic" or mixer control is no combination of
> switch/volume.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Try running this:

find /lib/modules/ -name "em28*"

Then pastebin the output and send us a link.  Also send us the output of:

uname -a

Thanks,

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> Try running this:
> 
> find /lib/modules/ -name "em28*"
> 
> Then pastebin the output and send us a link.

efa@01ath3200:~$ find /lib/modules/ -name "em28*"
/lib/modules/2.6.24-21-generic/empia/em28xx-audioep.ko
/lib/modules/2.6.24-21-generic/empia/em28xx-dvb.ko
/lib/modules/2.6.24-21-generic/empia/em28xx-cx25843.ko
/lib/modules/2.6.24-21-generic/empia/em28xx.ko
/lib/modules/2.6.24-21-generic/empia/em28xx-audio.ko
/lib/modules/2.6.24-21-generic/empia/em28xx-aad.ko
/lib/modules/2.6.27-14-generic/empia/em28xx-audioep.ko
/lib/modules/2.6.27-14-generic/empia/em28xx-dvb.ko
/lib/modules/2.6.27-14-generic/empia/em28xx-cx25843.ko
/lib/modules/2.6.27-14-generic/empia/em28xx.ko
/lib/modules/2.6.27-14-generic/empia/em28xx-audio.ko
/lib/modules/2.6.27-14-generic/empia/em28xx-aad.ko
/lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx
/lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko
/lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko
/lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko
/lib/modules/2.6.28-14-generic/empia/em28xx-audioep.ko
/lib/modules/2.6.28-14-generic/empia/em28xx-dvb.ko
/lib/modules/2.6.28-14-generic/empia/em28xx-cx25843.ko
/lib/modules/2.6.28-14-generic/empia/em28xx.ko
/lib/modules/2.6.28-14-generic/empia/em28xx-audio.ko
/lib/modules/2.6.28-14-generic/empia/em28xx-aad.ko
/lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx
/lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko
/lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko
/lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko
/lib/modules/2.6.28-13-generic/kernel/drivers/media/video/em28xx
/lib/modules/2.6.27-9-generic/empia/em28xx-audioep.ko
/lib/modules/2.6.27-9-generic/empia/em28xx-dvb.ko
/lib/modules/2.6.27-9-generic/empia/em28xx-cx25843.ko
/lib/modules/2.6.27-9-generic/empia/em28xx.ko
/lib/modules/2.6.27-9-generic/empia/em28xx-audio.ko
/lib/modules/2.6.27-9-generic/empia/em28xx-aad.ko
/lib/modules/2.6.27-11-generic/empia/em28xx-audioep.ko
/lib/modules/2.6.27-11-generic/empia/em28xx-dvb.ko
/lib/modules/2.6.27-11-generic/empia/em28xx-cx25843.ko
/lib/modules/2.6.27-11-generic/empia/em28xx.ko
/lib/modules/2.6.27-11-generic/empia/em28xx-audio.ko
/lib/modules/2.6.27-11-generic/empia/em28xx-aad.ko

there's all the history of modules I compiled for past kernels, and that 
I keep installed

> Also send us the output of:
> 
> uname -a

efa@01ath3200:~$ uname -a
Linux 01ath3200 2.6.28-14-generic #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC 
2009 i686 GNU/Linux

the last stable from Ubuntu 9.04

Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Wed, Aug 5, 2009 at 3:41 PM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller ha scritto:
>>
>> Try running this:
>>
>> find /lib/modules/ -name "em28*"
<snip>

Yeah, that confirms it.  The files in /lib/modules/2.6.28-14-generic/
are conflicting with the reset of the v4l-dvb codebase.  Basically,
the mcentral.de em28xx driver is attempting to load but conflicts with
the videobuf implementation provided by v4l-dvb.

I don't know what the process is for uninstalling the mcentral.de
em28xx driver.  Probably involves removing that directory and
re-running depmod or something.

Devin


-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> I don't know what the process is for uninstalling the mcentral.de
> em28xx driver.  Probably involves removing that directory and
> re-running depmod or something.

ok, I run:
$ sudo mv /lib/modules/2.6.28-14-generic/empia/ ~/temp
$ sudo depmod -a

then connected the TVtuner, Kaffeine identify the TV tuner and the 
video/audio is OK.
And now IR send digit to text editor and Kaffeine.

thanks
Valerio


dmesg show:

Aug  5 21:59:50 01ath3200 kernel: [ 6635.764021] usb 1-3: new high speed 
USB device using ehci_hcd and address 4
Aug  5 21:59:50 01ath3200 kernel: [ 6635.906865] usb 1-3: configuration 
#1 chosen from 1 choice
Aug  5 21:59:50 01ath3200 kernel: [ 6636.195926] em28xx: New device 
TerraTec Electronic GmbH Cinergy Hybrid T USB XS @ 480 Mbps (0ccd:0042, 
interface 0, class 0)
Aug  5 21:59:50 01ath3200 kernel: [ 6636.195934] em28xx #0: Identified 
as Terratec Hybrid XS (card=11)
Aug  5 21:59:50 01ath3200 kernel: [ 6636.204453] em28xx #0: chip ID is 
em2882/em2883
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364894] em28xx #0: i2c eeprom 
00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364903] em28xx #0: i2c eeprom 
10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364910] em28xx #0: i2c eeprom 
20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364917] em28xx #0: i2c eeprom 
30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364923] em28xx #0: i2c eeprom 
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364929] em28xx #0: i2c eeprom 
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364936] em28xx #0: i2c eeprom 
60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364942] em28xx #0: i2c eeprom 
70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364948] em28xx #0: i2c eeprom 
80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364955] em28xx #0: i2c eeprom 
90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364961] em28xx #0: i2c eeprom 
a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364968] em28xx #0: i2c eeprom 
b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364974] em28xx #0: i2c eeprom 
c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364980] em28xx #0: i2c eeprom 
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364987] em28xx #0: i2c eeprom 
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.364993] em28xx #0: i2c eeprom 
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug  5 21:59:50 01ath3200 kernel: [ 6636.365001] em28xx #0: EEPROM ID= 
0x9567eb1a, EEPROM hash = 0x41d0bf96
Aug  5 21:59:50 01ath3200 kernel: [ 6636.365002] em28xx #0: EEPROM info:
Aug  5 21:59:50 01ath3200 kernel: [ 6636.365004] em28xx #0:^IAC97 audio 
(5 sample rates)
Aug  5 21:59:50 01ath3200 kernel: [ 6636.365006] em28xx #0:^I500mA max power
Aug  5 21:59:50 01ath3200 kernel: [ 6636.365008] em28xx #0:^ITable at 
0x06, strings=0x326a, 0x349c, 0x0000
Aug  5 21:59:50 01ath3200 kernel: [ 6636.382818] tvp5150 1-005c: chip 
found @ 0xb8 (em28xx #0)
Aug  5 21:59:50 01ath3200 kernel: [ 6636.398433] tuner 1-0061: chip 
found @ 0xc2 (em28xx #0)
Aug  5 21:59:50 01ath3200 kernel: [ 6636.408529] xc2028 1-0061: creating 
new instance
Aug  5 21:59:50 01ath3200 kernel: [ 6636.408533] xc2028 1-0061: type set 
to XCeive xc2028/xc3028 tuner
Aug  5 21:59:50 01ath3200 kernel: [ 6636.408543] usb 1-3: firmware: 
requesting xc3028-v27.fw
Aug  5 21:59:50 01ath3200 kernel: [ 6636.484304] xc2028 1-0061: Loading 
80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Aug  5 21:59:50 01ath3200 kernel: [ 6636.532022] xc2028 1-0061: Loading 
firmware for type=BASE (1), id 0000000000000000.
Aug  5 21:59:51 01ath3200 kernel: [ 6637.614070] xc2028 1-0061: Loading 
firmware for type=(0), id 000000000000b700.
Aug  5 21:59:51 01ath3200 kernel: [ 6637.630491] SCODE (20000000), id 
000000000000b700:
Aug  5 21:59:51 01ath3200 kernel: [ 6637.630496] xc2028 1-0061: Loading 
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Aug  5 21:59:52 01ath3200 kernel: [ 6637.812497] input: em28xx IR 
(em28xx #0) as /devices/pci0000:00/0000:00:03.3/usb1/1-3/input/input10
Aug  5 21:59:52 01ath3200 pulseaudio[4364]: alsa-util.c: Cannot find 
fallback mixer control "Mic" or mixer control is no combination of 
switch/volume.
Aug  5 21:59:52 01ath3200 kernel: [ 6637.836243] em28xx #0: Config 
register raw data: 0x50
Aug  5 21:59:52 01ath3200 kernel: [ 6637.836986] em28xx #0: AC97 vendor 
ID = 0xffffffff
Aug  5 21:59:52 01ath3200 kernel: [ 6637.837368] em28xx #0: AC97 
features = 0x6a90
Aug  5 21:59:52 01ath3200 kernel: [ 6637.837370] em28xx #0: Empia 202 
AC97 audio processor detected
Aug  5 21:59:52 01ath3200 kernel: [ 6637.948487] tvp5150 1-005c: 
tvp5150am1 detected.
Aug  5 21:59:52 01ath3200 kernel: [ 6638.044877] em28xx #0: v4l2 driver 
version 0.1.2
Aug  5 21:59:52 01ath3200 kernel: [ 6638.115102] em28xx #0: V4L2 device 
registered as /dev/video0 and /dev/vbi0
Aug  5 21:59:52 01ath3200 kernel: [ 6638.131502] usbcore: registered new 
interface driver em28xx
Aug  5 21:59:52 01ath3200 kernel: [ 6638.131507] em28xx driver loaded
Aug  5 21:59:52 01ath3200 kernel: [ 6638.280453] xc2028 1-0061: 
attaching existing instance
Aug  5 21:59:52 01ath3200 kernel: [ 6638.280457] xc2028 1-0061: type set 
to XCeive xc2028/xc3028 tuner
Aug  5 21:59:52 01ath3200 kernel: [ 6638.280460] em28xx #0/2: xc3028 
attached
Aug  5 21:59:52 01ath3200 kernel: [ 6638.280463] DVB: registering new 
adapter (em28xx #0)
Aug  5 21:59:52 01ath3200 kernel: [ 6638.280467] DVB: registering 
adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
Aug  5 21:59:52 01ath3200 kernel: [ 6638.280878] Successfully loaded 
em28xx-dvb
Aug  5 21:59:52 01ath3200 kernel: [ 6638.280881] Em28xx: Initialized 
(Em28xx dvb Extension) extension
Aug  5 21:59:52 01ath3200 kernel: [ 6638.564739] tvp5150 1-005c: 
tvp5150am1 detected.

Aug  5 22:00:36 01ath3200 kernel: [ 6681.848015] xc2028 1-0061: Loading 
firmware for type=BASE F8MHZ (3), id 0000000000000000.
Aug  5 22:00:37 01ath3200 kernel: [ 6682.781882] xc2028 1-0061: Loading 
firmware for type=D2633 DTV8 (210), id 0000000000000000.
Aug  5 22:00:37 01ath3200 kernel: [ 6682.795251] xc2028 1-0061: Loading 
SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 
(620003e0), id 0000000000000000.

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Wed, Aug 5, 2009 at 4:08 PM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller ha scritto:
>>
>> I don't know what the process is for uninstalling the mcentral.de
>> em28xx driver.  Probably involves removing that directory and
>> re-running depmod or something.
>
> ok, I run:
> $ sudo mv /lib/modules/2.6.28-14-generic/empia/ ~/temp
> $ sudo depmod -a
>
> then connected the TVtuner, Kaffeine identify the TV tuner and the
> video/audio is OK.
> And now IR send digit to text editor and Kaffeine.
>
> thanks
> Valerio

Great.  I'll get a PULL request issued so this can get into the
mainline.  Thanks for testing.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> Great.  I'll get a PULL request issued so this can get into the
> mainline.  Thanks for testing.

I have three more request for this driver tuner, but are low priority.

1 - On/off button on the IR as now, send a command to the desktop to 
start the shutdown, reboot, suspend or hybernate window. To me should 
send something to the active window only, like an ALT+F4 to close the 
windows (for example Kaffeine).

2 - is there a simple (like a configuration text file) method to assign 
functions to unused buttons on the remote IR, like start an executable 
or send dbus messages?

3 - the TVtuner remain ON, also when user applications are all OFF. It 
become hot specially in summer. That tuner is not well designed in the 
thermal aspect, and when ON stay at 50°C, where blocky video and noisy 
audio happen. I made same holes on the two narrow side of the case and 
now is better. Is there a method to swith OFF, on put on standby the 
tuner (like on Windows) when it is unused?

thanks,
Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Wed, Aug 5, 2009 at 5:40 PM, Valerio Messina<efa@iol.it> wrote:
> 1 - On/off button on the IR as now, send a command to the desktop to start
> the shutdown, reboot, suspend or hybernate window. To me should send
> something to the active window only, like an ALT+F4 to close the windows
> (for example Kaffeine).

This is typically controlled by your application or the desktop
environment.  The on/off is mapped the same across all remote
controls.

> 2 - is there a simple (like a configuration text file) method to assign
> functions to unused buttons on the remote IR, like start an executable or
> send dbus messages?

The map that I committed in does have all the keys mapped to input
event codes.  You would need to reconfigure your input subsystem to
point the event codes to some other function.

> 3 - the TVtuner remain ON, also when user applications are all OFF. It
> become hot specially in summer. That tuner is not well designed in the
> thermal aspect, and when ON stay at 50°C, where blocky video and noisy audio
> happen. I made same holes on the two narrow side of the case and now is
> better. Is there a method to swith OFF, on put on standby the tuner (like on
> Windows) when it is unused?

The power management on these devices could certainly use some work.
I thought the power management was working on that board since it has
an xc3028 tuner chip, but I would have to look at the code to be sure.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> On Wed, Aug 5, 2009 at 5:40 PM, Valerio Messina<efa@iol.it> wrote:
>> 1 - On/off button on the IR as now, send a command to the desktop to start
>> the shutdown, reboot, suspend or hybernate window. To me should send
>> something to the active window only, like an ALT+F4 to close the windows
>> (for example Kaffeine).
> 
> This is typically controlled by your application or the desktop
> environment.  The on/off is mapped the same across all remote
> controls.

and seems mapped the same on all applications

> The map that I committed in does have all the keys mapped to input
> event codes.  You would need to reconfigure your input subsystem to
> point the event codes to some other function.

the channel up/down, EPG, Teletext and circled "i" on the remote does 
nothing.

Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Wed, Aug 5, 2009 at 6:49 PM, Valerio Messina<efa@iol.it> wrote:
>> The map that I committed in does have all the keys mapped to input
>> event codes.  You would need to reconfigure your input subsystem to
>> point the event codes to some other function.
>
> the channel up/down, EPG, Teletext and circled "i" on the remote does
> nothing.

They do "nothing", but that is the application's fault and not the
driver's.  When pressing the channel up key, the driver generates a
keyboard event called KEY_CHANNELUP, and the application has to have
that mapped to the correct shortcut.  Likewise, channel down, epg, and
the "i" generate KEY_CHANNELDOWN, KEY_EPG, and KEY_INFO.

Kaffeine 1.0pre1 appears to have some new infrastructure for assigning
events to shortcuts (see the menu item "Settings->Configure
Shortcuts"), however it doesn't appear to work correctly in all cases.
 Not that this is surprising for a prerelease.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Devin Heitmueller ha scritto:
> Great.  I'll get a PULL request issued so this can get into the
> mainline.  Thanks for testing.

sorry, as today I have to unsubscribe this interesting but really heavy 
mail list before holiday because it will rapidly fill up the space on my 
mailbox.

I will glad to further contribute testing of Terratec Cinergy Hybrid T 
XS, with future kernels and Ubuntu distribution, but please contact me 
to my email: efa@iol.it

In the meantime I have directed people on local ubuntu forum
http://forum.ubuntu-it.org/
to linuxtv.org for support of that tuner.

thanks for the rapid tuner+IR solution!

thanks for now,
Valerio

Re: Terratec Cinergy HibridT XS

[Devin Heitmueller]

On Wed, Aug 5, 2009 at 3:41 PM, Valerio Messina<efa@iol.it> wrote:
> Devin Heitmueller ha scritto:
>>
>> Try running this:
>>
>> find /lib/modules/ -name "em28*"
>>
>> Then pastebin the output and send us a link.
>
> efa@01ath3200:~$ find /lib/modules/ -name "em28*"
> /lib/modules/2.6.24-21-generic/empia/em28xx-audioep.ko
> /lib/modules/2.6.24-21-generic/empia/em28xx-dvb.ko
> /lib/modules/2.6.24-21-generic/empia/em28xx-cx25843.ko
> /lib/modules/2.6.24-21-generic/empia/em28xx.ko
> /lib/modules/2.6.24-21-generic/empia/em28xx-audio.ko
> /lib/modules/2.6.24-21-generic/empia/em28xx-aad.ko
> /lib/modules/2.6.27-14-generic/empia/em28xx-audioep.ko
> /lib/modules/2.6.27-14-generic/empia/em28xx-dvb.ko
> /lib/modules/2.6.27-14-generic/empia/em28xx-cx25843.ko
> /lib/modules/2.6.27-14-generic/empia/em28xx.ko
> /lib/modules/2.6.27-14-generic/empia/em28xx-audio.ko
> /lib/modules/2.6.27-14-generic/empia/em28xx-aad.ko
> /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx
> /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko
> /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko
> /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko
> /lib/modules/2.6.28-14-generic/empia/em28xx-audioep.ko
> /lib/modules/2.6.28-14-generic/empia/em28xx-dvb.ko
> /lib/modules/2.6.28-14-generic/empia/em28xx-cx25843.ko
> /lib/modules/2.6.28-14-generic/empia/em28xx.ko
> /lib/modules/2.6.28-14-generic/empia/em28xx-audio.ko
> /lib/modules/2.6.28-14-generic/empia/em28xx-aad.ko
> /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx
> /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko
> /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko
> /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko
> /lib/modules/2.6.28-13-generic/kernel/drivers/media/video/em28xx
> /lib/modules/2.6.27-9-generic/empia/em28xx-audioep.ko
> /lib/modules/2.6.27-9-generic/empia/em28xx-dvb.ko
> /lib/modules/2.6.27-9-generic/empia/em28xx-cx25843.ko
> /lib/modules/2.6.27-9-generic/empia/em28xx.ko
> /lib/modules/2.6.27-9-generic/empia/em28xx-audio.ko
> /lib/modules/2.6.27-9-generic/empia/em28xx-aad.ko
> /lib/modules/2.6.27-11-generic/empia/em28xx-audioep.ko
> /lib/modules/2.6.27-11-generic/empia/em28xx-dvb.ko
> /lib/modules/2.6.27-11-generic/empia/em28xx-cx25843.ko
> /lib/modules/2.6.27-11-generic/empia/em28xx.ko
> /lib/modules/2.6.27-11-generic/empia/em28xx-audio.ko
> /lib/modules/2.6.27-11-generic/empia/em28xx-aad.ko
>
> there's all the history of modules I compiled for past kernels, and that I
> keep installed
>
>> Also send us the output of:
>>
>> uname -a
>
> efa@01ath3200:~$ uname -a
> Linux 01ath3200 2.6.28-14-generic #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC
> 2009 i686 GNU/Linux
>
> the last stable from Ubuntu 9.04
>
> Valerio
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Note: I meant to say "/lib/modules/2.6.28-14-generic/empia" instead of
just /lib/modules/2.6.28-14-generic.

Cheers,

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: Terratec Cinergy HibridT XS

[Valerio Messina]

Valerio Messina ha scritto:
> I do not know if is correct that linuxtv.org link to a web site with 
> unsupported product/commercial.
> Please change the link in page:
> http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS

take note that also the page at:
http://www.linuxtv.org/wiki/index.php/TerraTec
three "with a patch" link to:
http://mcentral.de/wiki/index.php/Em2880
where its links, say (Pinnacle, Hauppauge, Terratec) are all unsupported 
device, but sundtek.

Valerio