From: Markus Schuss <chaos.tugraz@gmail.com>
To: linux-media@vger.kernel.org
Subject: Technotrend TT-Connect S-2400
Date: Sun, 23 Aug 2009 06:49:47 +0200 [thread overview]
Message-ID: <4A90CA6B.4080303@gmail.com> (raw)
Hi,
i have some problems getting a technotrend tt-connect s-2400 usb dvb-s
card to work. the problem is not unknown (as mentioned at
http://lkml.org/lkml/2009/5/23/95) but i have no idea how to fix this.
(any help according to the remote of this card would also be appreciated)
dmesg:
usb 2-2.1: new high speed USB device using ehci_hcd and address 19
usb 2-2.1: configuration #1 chosen from 1 choice
dvb-usb: found a 'Technotrend TT-connect S-2400' in cold state, will try
to load a firmware
usb 2-2.1: firmware: requesting dvb-usb-tt-s2400-01.fw
dvb-usb: downloading firmware from file 'dvb-usb-tt-s2400-01.fw'
usb 2-2.1: USB disconnect, address 19
dvb-usb: generic DVB-USB module successfully deinitialized and
disconnected.
usb 2-2.1: new high speed USB device using ehci_hcd and address 20
usb 2-2.1: configuration #1 chosen from 1 choice
dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Technotrend TT-connect S-2400)
DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
LNBx2x attached on addr=8<3>dvb-usb: recv bulk message failed: -110
ttusb2: there might have been an error during control message transfer.
(rlen = 0, was 0)
dvb-usb: Technotrend TT-connect S-2400 successfully initialized and
connected.
Thanks,
schuschu
next reply other threads:[~2009-08-23 4:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-23 4:49 Markus Schuss [this message]
2009-08-24 17:17 ` Technotrend TT-Connect S-2400 David
2009-08-24 18:09 ` André Weidemann
2009-08-25 19:06 ` David
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A90CA6B.4080303@gmail.com \
--to=chaos.tugraz@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox