* Pinnacle Hybrid Pro Stick (320e)?
@ 2009-08-23 12:48 Németh Márton
2009-08-23 13:06 ` hermann pitton
0 siblings, 1 reply; 10+ messages in thread
From: Németh Márton @ 2009-08-23 12:48 UTC (permalink / raw)
To: V4L Mailing List; +Cc: Németh Márton
Hi,
I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel
2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':
[ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[ 144.556371] usb 3-3: configuration #1 chosen from 1 choice
[ 145.598079] Linux video capture interface: v2.00
[ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[ 145.742186] em28xx #0: chip ID is em2882/em2883
[ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[ 145.823334] em28xx #0: EEPROM info:
[ 145.823336] em28xx #0: AC97 audio (5 sample rates)
[ 145.823340] em28xx #0: USB Remote wakeup capable
[ 145.823342] em28xx #0: 500mA max power
[ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 145.880355] em28xx #0: Please send an email with this log to:
[ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 145.880398] em28xx #0: card=8 -> Kworld USB2800
[ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS
[ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS
[ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV
[ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
[ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
[ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130
[ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 145.880456] em28xx #0: card=25 -> Gadmei UTV310
[ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 145.880470] em28xx #0: card=29 -> <NULL>
[ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9
[ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 145.880482] em28xx #0: card=33 -> <NULL>
[ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker
[ 145.880492] em28xx #0: card=36 -> NetGMBH Cam
[ 145.880495] em28xx #0: card=37 -> Gadmei UTV330
[ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer
[ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3
[ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D
[ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[ 145.880567] em28xx #0: card=59 -> <NULL>
[ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
[ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
[ 145.880577] em28xx #0: card=62 -> Gadmei TVR200
[ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2
[ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60
[ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
[ 145.880590] em28xx #0: card=66 -> Empire dual TV
[ 145.880593] em28xx #0: card=67 -> Terratec Grabby
[ 145.880596] em28xx #0: card=68 -> Terratec AV350
[ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
[ 145.880602] em28xx #0: card=70 -> Evga inDtube
[ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
[ 145.880716] em28xx #0: Config register raw data: 0x58
[ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[ 145.890963] em28xx #0: AC97 features = 0x3eb0
[ 145.890966] em28xx #0: Unknown AC97 audio processor detected!
[ 145.922320] em28xx #0: v4l2 driver version 0.1.2
[ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 146.027706] usbcore: registered new interface driver em28xx
[ 146.027787] em28xx driver loaded
[ 146.062766] usbcore: registered new interface driver snd-usb-audio
This device was working with 2.6.28 together with the out-of-tree
driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").
What has to be done in order this device can work with the newest Linux kernel?
Regards,
Márton Németh
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-23 12:48 Pinnacle Hybrid Pro Stick (320e)? Németh Márton @ 2009-08-23 13:06 ` hermann pitton 2009-08-23 13:14 ` Németh Márton 0 siblings, 1 reply; 10+ messages in thread From: hermann pitton @ 2009-08-23 13:06 UTC (permalink / raw) To: Németh Márton; +Cc: V4L Mailing List Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton: > Hi, > > I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel > 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg': > > [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3 > [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice > [ 145.598079] Linux video capture interface: v2.00 > [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) > [ 145.742186] em28xx #0: chip ID is em2882/em2883 > [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 > [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 > [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 > [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 > [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 > [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 > [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 > [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00 > [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420 > [ 145.823334] em28xx #0: EEPROM info: > [ 145.823336] em28xx #0: AC97 audio (5 sample rates) > [ 145.823340] em28xx #0: USB Remote wakeup capable > [ 145.823342] em28xx #0: 500mA max power > [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 > [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) > [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom] > [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a] > [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] > [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. > [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that. > [ 145.880355] em28xx #0: Please send an email with this log to: > [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> > [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420 > [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080 > [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: > [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber > [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber > [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB > [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2 > [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2 > [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0 > [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB > [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II > [ 145.880398] em28xx #0: card=8 -> Kworld USB2800 > [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker > [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 > [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS > [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF > [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS > [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 > [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV > [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 > [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick > [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) > [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design > [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 > [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder > [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber > [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130 > [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner > [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310 > [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 > [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) > [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe > [ 145.880470] em28xx #0: card=29 -> <NULL> > [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 > [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9 > [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV > [ 145.880482] em28xx #0: card=33 -> <NULL> > [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS > [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker > [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam > [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330 > [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer > [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U > [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U > [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T > [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T > [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS > [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) > [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T > [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3 > [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U > [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U > [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D > [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II > [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam > [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid > [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro > [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR > [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) > [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) > [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 > [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo > [ 145.880567] em28xx #0: card=59 -> <NULL> > [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 > [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 > [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200 > [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2 > [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60 > [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ > [ 145.880590] em28xx #0: card=66 -> Empire dual TV > [ 145.880593] em28xx #0: card=67 -> Terratec Grabby > [ 145.880596] em28xx #0: card=68 -> Terratec AV350 > [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box > [ 145.880602] em28xx #0: card=70 -> Evga inDtube > [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix > [ 145.880716] em28xx #0: Config register raw data: 0x58 > [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0 > [ 145.890963] em28xx #0: AC97 features = 0x3eb0 > [ 145.890966] em28xx #0: Unknown AC97 audio processor detected! > [ 145.922320] em28xx #0: v4l2 driver version 0.1.2 > [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 > [ 146.027706] usbcore: registered new interface driver em28xx > [ 146.027787] em28xx driver loaded > [ 146.062766] usbcore: registered new interface driver snd-usb-audio > > This device was working with 2.6.28 together with the out-of-tree > driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new"). > > What has to be done in order this device can work with the newest Linux kernel? > > Regards, > > Márton Németh > never use trees deliberately out-of-tree? Buy an expensive device from Markus with first class support and forget about all others ... * ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-23 13:06 ` hermann pitton @ 2009-08-23 13:14 ` Németh Márton 2009-08-23 13:18 ` hermann pitton 0 siblings, 1 reply; 10+ messages in thread From: Németh Márton @ 2009-08-23 13:14 UTC (permalink / raw) To: hermann pitton; +Cc: V4L Mailing List hermann pitton wrote: > Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton: >> Hi, >> >> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel >> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg': >> >> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3 >> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice >> [ 145.598079] Linux video capture interface: v2.00 >> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) >> [ 145.742186] em28xx #0: chip ID is em2882/em2883 >> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 >> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 >> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 >> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 >> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 >> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 >> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 >> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00 >> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 >> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420 >> [ 145.823334] em28xx #0: EEPROM info: >> [ 145.823336] em28xx #0: AC97 audio (5 sample rates) >> [ 145.823340] em28xx #0: USB Remote wakeup capable >> [ 145.823342] em28xx #0: 500mA max power >> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 >> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) >> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom] >> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a] >> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] >> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. >> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that. >> [ 145.880355] em28xx #0: Please send an email with this log to: >> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> >> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420 >> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080 >> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: >> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber >> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber >> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB >> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2 >> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2 >> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0 >> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB >> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II >> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800 >> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker >> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 >> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS >> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF >> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS >> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 >> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV >> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 >> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick >> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) >> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design >> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 >> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder >> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber >> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130 >> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner >> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310 >> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 >> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) >> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe >> [ 145.880470] em28xx #0: card=29 -> <NULL> >> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 >> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9 >> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV >> [ 145.880482] em28xx #0: card=33 -> <NULL> >> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS >> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker >> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam >> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330 >> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer >> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U >> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U >> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T >> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T >> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS >> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) >> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T >> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3 >> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U >> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U >> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D >> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II >> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam >> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid >> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro >> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR >> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) >> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) >> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 >> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo >> [ 145.880567] em28xx #0: card=59 -> <NULL> >> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 >> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 >> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200 >> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2 >> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60 >> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ >> [ 145.880590] em28xx #0: card=66 -> Empire dual TV >> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby >> [ 145.880596] em28xx #0: card=68 -> Terratec AV350 >> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box >> [ 145.880602] em28xx #0: card=70 -> Evga inDtube >> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix >> [ 145.880716] em28xx #0: Config register raw data: 0x58 >> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0 >> [ 145.890963] em28xx #0: AC97 features = 0x3eb0 >> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected! >> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2 >> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 >> [ 146.027706] usbcore: registered new interface driver em28xx >> [ 146.027787] em28xx driver loaded >> [ 146.062766] usbcore: registered new interface driver snd-usb-audio >> >> This device was working with 2.6.28 together with the out-of-tree >> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new"). >> >> What has to be done in order this device can work with the newest Linux kernel? >> >> Regards, >> >> Márton Németh >> > > never use trees deliberately out-of-tree? Maybe I was not clear enough in my description. Currently I am using 2.6.31-rc7 without any modification. This version contained the message that I should contact this mailing list (see at 145.880355). Regards, Márton Németh ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-23 13:14 ` Németh Márton @ 2009-08-23 13:18 ` hermann pitton 2009-08-23 13:29 ` Devin Heitmueller 0 siblings, 1 reply; 10+ messages in thread From: hermann pitton @ 2009-08-23 13:18 UTC (permalink / raw) To: Németh Márton; +Cc: V4L Mailing List Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton: > hermann pitton wrote: > > Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton: > >> Hi, > >> > >> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel > >> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg': > >> > >> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3 > >> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice > >> [ 145.598079] Linux video capture interface: v2.00 > >> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) > >> [ 145.742186] em28xx #0: chip ID is em2882/em2883 > >> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 > >> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 > >> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 > >> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 > >> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 > >> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 > >> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 > >> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00 > >> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > >> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420 > >> [ 145.823334] em28xx #0: EEPROM info: > >> [ 145.823336] em28xx #0: AC97 audio (5 sample rates) > >> [ 145.823340] em28xx #0: USB Remote wakeup capable > >> [ 145.823342] em28xx #0: 500mA max power > >> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 > >> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) > >> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom] > >> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a] > >> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] > >> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. > >> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that. > >> [ 145.880355] em28xx #0: Please send an email with this log to: > >> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> > >> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420 > >> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080 > >> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: > >> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber > >> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber > >> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB > >> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2 > >> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2 > >> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0 > >> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB > >> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II > >> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800 > >> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker > >> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 > >> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS > >> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF > >> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS > >> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 > >> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV > >> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 > >> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick > >> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) > >> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design > >> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 > >> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder > >> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber > >> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130 > >> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner > >> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310 > >> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 > >> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) > >> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe > >> [ 145.880470] em28xx #0: card=29 -> <NULL> > >> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 > >> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9 > >> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV > >> [ 145.880482] em28xx #0: card=33 -> <NULL> > >> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS > >> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker > >> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam > >> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330 > >> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer > >> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U > >> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U > >> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T > >> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T > >> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS > >> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) > >> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T > >> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3 > >> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U > >> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U > >> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D > >> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II > >> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam > >> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid > >> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro > >> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR > >> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) > >> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) > >> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 > >> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo > >> [ 145.880567] em28xx #0: card=59 -> <NULL> > >> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 > >> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 > >> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200 > >> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2 > >> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60 > >> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ > >> [ 145.880590] em28xx #0: card=66 -> Empire dual TV > >> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby > >> [ 145.880596] em28xx #0: card=68 -> Terratec AV350 > >> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box > >> [ 145.880602] em28xx #0: card=70 -> Evga inDtube > >> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix > >> [ 145.880716] em28xx #0: Config register raw data: 0x58 > >> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0 > >> [ 145.890963] em28xx #0: AC97 features = 0x3eb0 > >> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected! > >> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2 > >> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 > >> [ 146.027706] usbcore: registered new interface driver em28xx > >> [ 146.027787] em28xx driver loaded > >> [ 146.062766] usbcore: registered new interface driver snd-usb-audio > >> > >> This device was working with 2.6.28 together with the out-of-tree > >> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new"). > >> > >> What has to be done in order this device can work with the newest Linux kernel? > >> > >> Regards, > >> > >> Márton Németh > >> > > > > never use trees deliberately out-of-tree? > > Maybe I was not clear enough in my description. Currently I am using > 2.6.31-rc7 without any modification. This version contained the message > that I should contact this mailing list (see at 145.880355). > > Regards, > > Márton Németh oooh, good that we have that message now. Then, port all you still can get before he closed his sources? Cheers, Hermann ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-23 13:18 ` hermann pitton @ 2009-08-23 13:29 ` Devin Heitmueller 2009-08-23 13:45 ` hermann pitton 2009-08-30 7:18 ` Németh Márton 0 siblings, 2 replies; 10+ messages in thread From: Devin Heitmueller @ 2009-08-23 13:29 UTC (permalink / raw) To: hermann pitton; +Cc: Németh Márton, V4L Mailing List 2009/8/23 hermann pitton <hermann-pitton@arcor.de>: > > Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton: >> hermann pitton wrote: >> > Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton: >> >> Hi, >> >> >> >> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel >> >> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg': >> >> >> >> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3 >> >> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice >> >> [ 145.598079] Linux video capture interface: v2.00 >> >> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) >> >> [ 145.742186] em28xx #0: chip ID is em2882/em2883 >> >> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 >> >> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 >> >> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 >> >> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 >> >> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 >> >> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 >> >> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 >> >> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00 >> >> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420 >> >> [ 145.823334] em28xx #0: EEPROM info: >> >> [ 145.823336] em28xx #0: AC97 audio (5 sample rates) >> >> [ 145.823340] em28xx #0: USB Remote wakeup capable >> >> [ 145.823342] em28xx #0: 500mA max power >> >> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 >> >> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) >> >> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom] >> >> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a] >> >> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] >> >> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. >> >> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that. >> >> [ 145.880355] em28xx #0: Please send an email with this log to: >> >> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> >> >> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420 >> >> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080 >> >> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: >> >> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber >> >> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber >> >> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB >> >> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2 >> >> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2 >> >> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0 >> >> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB >> >> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II >> >> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800 >> >> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker >> >> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 >> >> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS >> >> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF >> >> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS >> >> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 >> >> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV >> >> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 >> >> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick >> >> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) >> >> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design >> >> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 >> >> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder >> >> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber >> >> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130 >> >> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner >> >> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310 >> >> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 >> >> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) >> >> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe >> >> [ 145.880470] em28xx #0: card=29 -> <NULL> >> >> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 >> >> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9 >> >> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV >> >> [ 145.880482] em28xx #0: card=33 -> <NULL> >> >> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS >> >> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker >> >> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam >> >> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330 >> >> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer >> >> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U >> >> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U >> >> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T >> >> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T >> >> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS >> >> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) >> >> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T >> >> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3 >> >> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U >> >> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U >> >> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D >> >> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II >> >> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam >> >> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid >> >> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro >> >> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR >> >> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) >> >> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) >> >> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 >> >> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo >> >> [ 145.880567] em28xx #0: card=59 -> <NULL> >> >> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 >> >> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 >> >> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200 >> >> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2 >> >> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60 >> >> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ >> >> [ 145.880590] em28xx #0: card=66 -> Empire dual TV >> >> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby >> >> [ 145.880596] em28xx #0: card=68 -> Terratec AV350 >> >> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box >> >> [ 145.880602] em28xx #0: card=70 -> Evga inDtube >> >> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix >> >> [ 145.880716] em28xx #0: Config register raw data: 0x58 >> >> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0 >> >> [ 145.890963] em28xx #0: AC97 features = 0x3eb0 >> >> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected! >> >> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2 >> >> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 >> >> [ 146.027706] usbcore: registered new interface driver em28xx >> >> [ 146.027787] em28xx driver loaded >> >> [ 146.062766] usbcore: registered new interface driver snd-usb-audio >> >> >> >> This device was working with 2.6.28 together with the out-of-tree >> >> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new"). >> >> >> >> What has to be done in order this device can work with the newest Linux kernel? >> >> >> >> Regards, >> >> >> >> Márton Németh >> >> >> > >> > never use trees deliberately out-of-tree? >> >> Maybe I was not clear enough in my description. Currently I am using >> 2.6.31-rc7 without any modification. This version contained the message >> that I should contact this mailing list (see at 145.880355). >> >> Regards, >> >> Márton Németh > > oooh, good that we have that message now. > > Then, port all you still can get before he closed his sources? > > Cheers, > Hermann Hello Németh, I committed some changes to get this board working a few weeks ago. I will check your dmesg output and see if the changes missed the merge window. It's possible the changes didn't make it in time for 2.6.31, so I will have to check. Cheers, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-23 13:29 ` Devin Heitmueller @ 2009-08-23 13:45 ` hermann pitton 2009-08-24 19:18 ` Devin Heitmueller 2009-08-30 7:18 ` Németh Márton 1 sibling, 1 reply; 10+ messages in thread From: hermann pitton @ 2009-08-23 13:45 UTC (permalink / raw) To: Devin Heitmueller; +Cc: Németh Márton, V4L Mailing List Am Sonntag, den 23.08.2009, 09:29 -0400 schrieb Devin Heitmueller: > 2009/8/23 hermann pitton <hermann-pitton@arcor.de>: > > > > Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton: > >> hermann pitton wrote: > >> > Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton: > >> >> Hi, > >> >> > >> >> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel > >> >> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg': > >> >> > >> >> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3 > >> >> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice > >> >> [ 145.598079] Linux video capture interface: v2.00 > >> >> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) > >> >> [ 145.742186] em28xx #0: chip ID is em2882/em2883 > >> >> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 > >> >> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 > >> >> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 > >> >> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 > >> >> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 > >> >> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 > >> >> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00 > >> >> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > >> >> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420 > >> >> [ 145.823334] em28xx #0: EEPROM info: > >> >> [ 145.823336] em28xx #0: AC97 audio (5 sample rates) > >> >> [ 145.823340] em28xx #0: USB Remote wakeup capable > >> >> [ 145.823342] em28xx #0: 500mA max power > >> >> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 > >> >> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) > >> >> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom] > >> >> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a] > >> >> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] > >> >> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. > >> >> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that. > >> >> [ 145.880355] em28xx #0: Please send an email with this log to: > >> >> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> > >> >> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420 > >> >> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080 > >> >> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: > >> >> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber > >> >> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber > >> >> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB > >> >> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2 > >> >> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2 > >> >> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0 > >> >> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB > >> >> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II > >> >> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800 > >> >> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker > >> >> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 > >> >> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS > >> >> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF > >> >> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS > >> >> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 > >> >> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV > >> >> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 > >> >> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick > >> >> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) > >> >> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design > >> >> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 > >> >> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder > >> >> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber > >> >> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130 > >> >> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner > >> >> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310 > >> >> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 > >> >> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) > >> >> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe > >> >> [ 145.880470] em28xx #0: card=29 -> <NULL> > >> >> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 > >> >> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9 > >> >> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV > >> >> [ 145.880482] em28xx #0: card=33 -> <NULL> > >> >> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS > >> >> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker > >> >> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam > >> >> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330 > >> >> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer > >> >> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U > >> >> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U > >> >> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T > >> >> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T > >> >> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS > >> >> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) > >> >> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T > >> >> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3 > >> >> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U > >> >> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U > >> >> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D > >> >> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II > >> >> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam > >> >> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid > >> >> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro > >> >> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR > >> >> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) > >> >> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) > >> >> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 > >> >> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo > >> >> [ 145.880567] em28xx #0: card=59 -> <NULL> > >> >> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 > >> >> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 > >> >> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200 > >> >> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2 > >> >> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60 > >> >> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ > >> >> [ 145.880590] em28xx #0: card=66 -> Empire dual TV > >> >> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby > >> >> [ 145.880596] em28xx #0: card=68 -> Terratec AV350 > >> >> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box > >> >> [ 145.880602] em28xx #0: card=70 -> Evga inDtube > >> >> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix > >> >> [ 145.880716] em28xx #0: Config register raw data: 0x58 > >> >> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0 > >> >> [ 145.890963] em28xx #0: AC97 features = 0x3eb0 > >> >> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected! > >> >> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2 > >> >> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 > >> >> [ 146.027706] usbcore: registered new interface driver em28xx > >> >> [ 146.027787] em28xx driver loaded > >> >> [ 146.062766] usbcore: registered new interface driver snd-usb-audio > >> >> > >> >> This device was working with 2.6.28 together with the out-of-tree > >> >> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new"). > >> >> > >> >> What has to be done in order this device can work with the newest Linux kernel? > >> >> > >> >> Regards, > >> >> > >> >> Márton Németh > >> >> > >> > > >> > never use trees deliberately out-of-tree? > >> > >> Maybe I was not clear enough in my description. Currently I am using > >> 2.6.31-rc7 without any modification. This version contained the message > >> that I should contact this mailing list (see at 145.880355). > >> > >> Regards, > >> > >> Márton Németh > > > > oooh, good that we have that message now. > > > > Then, port all you still can get before he closed his sources? > > > > Cheers, > > Hermann > > Hello Németh, > > I committed some changes to get this board working a few weeks ago. I > will check your dmesg output and see if the changes missed the merge > window. It's possible the changes didn't make it in time for 2.6.31, > so I will have to check. > > Cheers, > > Devin > Hi Devin, thanks! Sorry for disturbing your Sunday. Does Daniel with that x3m stuff has any chance to get it working with your latest fixes? I don't find anything further on the lists and therefore I'm ranting ... Cheers, Hermann ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-23 13:45 ` hermann pitton @ 2009-08-24 19:18 ` Devin Heitmueller 0 siblings, 0 replies; 10+ messages in thread From: Devin Heitmueller @ 2009-08-24 19:18 UTC (permalink / raw) To: hermann pitton; +Cc: Németh Márton, V4L Mailing List On Sun, Aug 23, 2009 at 9:45 AM, hermann pitton<hermann-pitton@arcor.de> wrote: > Hi Devin, > > thanks! > > Sorry for disturbing your Sunday. > > Does Daniel with that x3m stuff has any chance to get it working with > your latest fixes? > > I don't find anything further on the lists and therefore I'm ranting ... > > Cheers, > Hermann Hello Hermann, I think you meant to post this onto the other thread. Regarding Daniel's issue - I would have to see the lspci output to see if he has the same card. Probably the fastest approach would be for him to just install the latest v4l-dvb code and see if it starts working. Cheers, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-23 13:29 ` Devin Heitmueller 2009-08-23 13:45 ` hermann pitton @ 2009-08-30 7:18 ` Németh Márton 2009-08-30 14:07 ` Devin Heitmueller 1 sibling, 1 reply; 10+ messages in thread From: Németh Márton @ 2009-08-30 7:18 UTC (permalink / raw) To: Devin Heitmueller; +Cc: hermann pitton, V4L Mailing List Devin Heitmueller wrote: > I committed some changes to get this board working a few weeks ago. I > will check your dmesg output and see if the changes missed the merge > window. It's possible the changes didn't make it in time for 2.6.31, > so I will have to check. I tried the following software setup with Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6. When I plug the device I still get the following message: [ 111.681186] usb 4-3: new high speed USB device using ehci_hcd and address 3 [ 111.803542] usb 4-3: configuration #1 chosen from 1 choice [ 112.196629] Linux video capture interface: v2.00 [ 112.376039] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) [ 112.377937] em28xx #0: chip ID is em2882/em2883 [ 112.383927] usbcore: registered new interface driver snd-usb-audio [ 112.460285] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 [ 112.460308] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 [ 112.460326] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 [ 112.460343] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 [ 112.460360] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460377] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460393] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 [ 112.460410] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 [ 112.460426] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 [ 112.460443] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460460] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460476] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460493] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460509] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460526] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00 [ 112.460543] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [ 112.460561] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420 [ 112.460564] em28xx #0: EEPROM info: [ 112.460567] em28xx #0: AC97 audio (5 sample rates) [ 112.460570] em28xx #0: USB Remote wakeup capable [ 112.460573] em28xx #0: 500mA max power [ 112.460577] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 [ 112.466288] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 112.499766] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 112.505263] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [ 112.507760] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [ 112.520001] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 112.520239] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 112.520244] em28xx #0: Please send an email with this log to: [ 112.520247] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> [ 112.520251] em28xx #0: Board eeprom hash is 0xc49e2420 [ 112.520254] em28xx #0: Board i2c devicelist hash is 0x27e10080 [ 112.520257] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 112.520262] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 112.520266] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 112.520269] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 112.520273] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 112.520276] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 112.520279] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 112.520283] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 112.520286] em28xx #0: card=7 -> Leadtek Winfast USB II [ 112.520290] em28xx #0: card=8 -> Kworld USB2800 [ 112.520293] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker [ 112.520297] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 112.520301] em28xx #0: card=11 -> Terratec Hybrid XS [ 112.520304] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 112.520308] em28xx #0: card=13 -> Terratec Prodigy XS [ 112.520311] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 112.520315] em28xx #0: card=15 -> V-Gear PocketTV [ 112.520318] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 112.520322] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 112.520325] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 112.520329] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 112.520332] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 112.520336] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 112.520340] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 112.520343] em28xx #0: card=23 -> Huaqi DLCW-130 [ 112.520346] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 112.520350] em28xx #0: card=25 -> Gadmei UTV310 [ 112.520353] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 112.520356] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 112.520360] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 112.520364] em28xx #0: card=29 -> <NULL> [ 112.520367] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 112.520370] em28xx #0: card=31 -> Usbgear VD204v9 [ 112.520374] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 112.520377] em28xx #0: card=33 -> <NULL> [ 112.520380] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 112.520384] em28xx #0: card=35 -> Typhoon DVD Maker [ 112.520387] em28xx #0: card=36 -> NetGMBH Cam [ 112.520390] em28xx #0: card=37 -> Gadmei UTV330 [ 112.520393] em28xx #0: card=38 -> Yakumo MovieMixer [ 112.520397] em28xx #0: card=39 -> KWorld PVRTV 300U [ 112.520400] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 112.520403] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 112.520407] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 112.520410] em28xx #0: card=43 -> Terratec Cinergy T XS [ 112.520413] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 112.520417] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 112.520420] em28xx #0: card=46 -> Compro, VideoMate U3 [ 112.520424] em28xx #0: card=47 -> KWorld DVB-T 305U [ 112.520427] em28xx #0: card=48 -> KWorld DVB-T 310U [ 112.520430] em28xx #0: card=49 -> MSI DigiVox A/D [ 112.520433] em28xx #0: card=50 -> MSI DigiVox A/D II [ 112.520437] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 112.520440] em28xx #0: card=52 -> DNT DA2 Hybrid [ 112.520444] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 112.520447] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 112.520450] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 112.520454] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 112.520457] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 112.520461] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 112.520465] em28xx #0: card=59 -> <NULL> [ 112.520468] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 112.520471] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 112.520475] em28xx #0: card=62 -> Gadmei TVR200 [ 112.520478] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 112.520481] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 112.520485] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 112.520488] em28xx #0: card=66 -> Empire dual TV [ 112.520491] em28xx #0: card=67 -> Terratec Grabby [ 112.520495] em28xx #0: card=68 -> Terratec AV350 [ 112.520498] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 112.520501] em28xx #0: card=70 -> Evga inDtube [ 112.520505] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 112.520760] em28xx #0: Config register raw data: 0x58 [ 112.530630] em28xx #0: AC97 vendor ID = 0x7eb07eb0 [ 112.531000] em28xx #0: AC97 features = 0x7eb0 [ 112.531497] em28xx #0: Unknown AC97 audio processor detected! [ 112.554574] em28xx #0: v4l2 driver version 0.1.2 [ 112.592340] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [ 112.598179] usbcore: registered new interface driver em28xx [ 112.598234] em28xx driver loaded What should be the next step to get this device working? Regards, Márton Németh ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-30 7:18 ` Németh Márton @ 2009-08-30 14:07 ` Devin Heitmueller 2009-08-30 14:48 ` Németh Márton 0 siblings, 1 reply; 10+ messages in thread From: Devin Heitmueller @ 2009-08-30 14:07 UTC (permalink / raw) To: Németh Márton; +Cc: hermann pitton, V4L Mailing List 2009/8/30 Németh Márton <nm127@freemail.hu>: > Devin Heitmueller wrote: >> I committed some changes to get this board working a few weeks ago. I >> will check your dmesg output and see if the changes missed the merge >> window. It's possible the changes didn't make it in time for 2.6.31, >> so I will have to check. > > I tried the following software setup with Pinnacle Hybrid Pro Stick (320e) > (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the > http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6. > > When I plug the device I still get the following message: > <snip> The changes have not gone upstream yet. Mauro wrote some code for a potential firmware extract script, but it doesn't work yet. I've been tied up in another project, so I haven't gotten back to it. I know I keep dragging this out, but given my current workload I probably won't get the work done for the next couple of weeks. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)? 2009-08-30 14:07 ` Devin Heitmueller @ 2009-08-30 14:48 ` Németh Márton 0 siblings, 0 replies; 10+ messages in thread From: Németh Márton @ 2009-08-30 14:48 UTC (permalink / raw) To: Devin Heitmueller; +Cc: hermann pitton, V4L Mailing List Devin Heitmueller worte: > 2009/8/30 Németh Márton <nm127@freemail.hu>: >> Devin Heitmueller wrote: >>> I committed some changes to get this board working a few weeks ago. I >>> will check your dmesg output and see if the changes missed the merge >>> window. It's possible the changes didn't make it in time for 2.6.31, >>> so I will have to check. >> I tried the following software setup with Pinnacle Hybrid Pro Stick (320e) >> (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the >> http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6. >> >> When I plug the device I still get the following message: >> > <snip> > > The changes have not gone upstream yet. Mauro wrote some code for a > potential firmware extract script, but it doesn't work yet. > > I've been tied up in another project, so I haven't gotten back to it. > I know I keep dragging this out, but given my current workload I > probably won't get the work done for the next couple of weeks. OK, no problem. I just wanted to know whether I can test or try something myself. Regards, Márton Németh ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-08-30 14:48 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-08-23 12:48 Pinnacle Hybrid Pro Stick (320e)? Németh Márton 2009-08-23 13:06 ` hermann pitton 2009-08-23 13:14 ` Németh Márton 2009-08-23 13:18 ` hermann pitton 2009-08-23 13:29 ` Devin Heitmueller 2009-08-23 13:45 ` hermann pitton 2009-08-24 19:18 ` Devin Heitmueller 2009-08-30 7:18 ` Németh Márton 2009-08-30 14:07 ` Devin Heitmueller 2009-08-30 14:48 ` Németh Márton
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox