From: Morvan Le Meut <mlemeut@gmail.com>
To: linux-media@vger.kernel.org
Subject: (EC168) PC Basic TNT USB Basic V5 ( France ) recognized but no channel tuning
Date: Wed, 02 Sep 2009 21:34:11 +0200 [thread overview]
Message-ID: <4A9EC8B3.10904@gmail.com> (raw)
Hello
I've just bough that and it seems that the EC168 driver can't work with
it ( yet )
The PCB identifies itself as a ForwardVideo "EzTV818_D.". Work with a
EC168 and a MXL5003S ( no doubt about it, but it is barely legible, and
since i've no camera, no PCB picture available ). ( and the EC168BDA.bin
firmware is provided on the CD )
A typical dmesg for it :
[19715.764919] usb 2-1.1: new high speed USB device using ehci_hcd and
address 8
[19715.873356] usb 2-1.1: configuration #1 chosen from 1 choice
[19715.878085] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference
design' in cold state, will try to load a firmware
[19715.878096] firmware: requesting dvb-usb-ec168.fw
[19715.929889] dvb-usb: downloading firmware from file 'dvb-usb-ec168.fw'
[19715.985884] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference
design' in warm state.
[19715.985958] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[19715.986487] DVB: registering new adapter (E3C EC168 DVB-T USB2.0
reference design)
[19715.986931] DVB: registering adapter 1 frontend 0 (E3C EC100 DVB-T)...
[19715.987045] MXL5005S: Attached at address 0xc6
[19715.987052] dvb-usb: E3C EC168 DVB-T USB2.0 reference design
successfully initialized and connected.
[19716.004730] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference
design' in warm state.
[19716.004799] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[19716.010131] DVB: registering new adapter (E3C EC168 DVB-T USB2.0
reference design)
[19716.010499] DVB: registering adapter 2 frontend 0 (E3C EC100 DVB-T)...
[19716.010612] MXL5005S: Attached at address 0xc6
[19716.010619] dvb-usb: E3C EC168 DVB-T USB2.0 reference design
successfully initialized and connected.
[19716.010729] usb 2-1.1: New USB device found, idVendor=18b4,
idProduct=1001
[19716.010733] usb 2-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
To be perfectly honest a previous attempt didn't have the "New USB
device" at the end, but the result was the same : no tuning possible (
"WARNING: >>> tuning failed!!!" ) even if there is a device file for it
in /dev/ ( on a Linux debian 2.6.26-2-686 #1 SMP Fri Aug 14 01:27:18 UTC
2009 i686 GNU/Linux with V4L/DVB driver using mercurial ). I've checked
the antenna cable ( my old Intuix S800 work perfectly in the same setup
but it does not have a remote :) )
Thanks for any info/tips.
next reply other threads:[~2009-09-02 19:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-02 19:34 Morvan Le Meut [this message]
2009-09-02 22:03 ` (EC168) PC Basic TNT USB Basic V5 ( France ) recognized but no channel tuning Antti Palosaari
2009-09-02 23:00 ` Morvan Le Meut
2009-09-02 23:12 ` hermann pitton
2009-09-03 5:40 ` Morvan Le Meut
2009-09-03 22:45 ` hermann pitton
2009-09-03 6:45 ` Morvan Le Meut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A9EC8B3.10904@gmail.com \
--to=mlemeut@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox