From: Jed <jedi.theone@gmail.com>
To: Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: Re: PCI/e with dual DVB-T + AV-in?
Date: Wed, 09 Sep 2009 06:20:00 +1000 [thread overview]
Message-ID: <4AA6BC70.4040007@gmail.com> (raw)
In-Reply-To: <4AA6B989.8070605@kernellabs.com>
Steven Toth wrote:
> On 9/8/09 4:04 PM, Jed wrote:
>>
>>>>>>> Hi Ya'll,
>>>>>>>
>>>>>>> Going on response levels thus far I'm not expecting much :-D but I
>>>>>>> was
>>>>>>> wondering if someone could possibly help me out here.
>>>>>>>
>>>>>>> Is there anything with half-decent driver support that is PCI/e,
>>>>>>> and has
>>>>>>> dual DVB-T + A/V-in?*
>>>>>>> As a bonus it would be dual Hybrid and have hardware encode, but I
>>>>>>> wouldn't expect either to work at this stage.
>>>>>>>
>>>>>>> I'm still trawling through mail-lists & wiki's etc, so I may yet
>>>>>>> find the
>>>>>>> best solution, but I was hoping some might already know.
>>>>>>> Any advice or even just a response to chastise me is greatly
>>>>>>> appreciated!
>>>>>>> :-D
>>>>>>>
>>>>>>> Cheers,
>>>>>>> Jed
>>>>>>> *Is HVR-2200 the only option?
>>>>>>> I wish there was something with better AV-in but it might end-up
>>>>>>> being my
>>>>>>> final choice.
>>>>>>>
>>>>>>>
>>>>>> Jed wrote:
>>>>>> I've stopped looking for an alternative card, going to have a
>>>>>> crack at
>>>>>> getting my 7162-based device working.
>>>>>> Still, any suggestions in the meantime are most welcome! I've also
>>>>>> decided
>>>>>> AV-in isn't that important...
>>>>>> So just a known, nicely working PCI/e + dual DVB-T card, having the
>>>>>> other
>>>>>> features is nice but they needn't be working yet.
>>>>>>
>>>>>> Wish me luck! :-D
>>>>>>
>>>>>
>>>>> HVR2200 is in well supported now for digital-only. It is a dual tuner
>>>>> board using a PCI-E interface. It has A/V capabilities that are not
>>>>> *yet* supported in Linux. Don't know when A/V will be supported, but
>>>>> it will probably happen, eventually.
>>>>>
>>>>> It is a dual hybrid, and it does do hardware encode. (although not
>>>>> yet in Linux) This probably is the device for you.
>>>>>
>>>>> To follow the development more closely, see the blog on
>>>>> kernellabs.com
>>>>> I hope this helps.
>>>>>
>>>>> Regards,
>>>>> Mike
>>>
>>> Hi saa7164 devs, once(if) the software support is in place for
>>> A/V-in...
>>> Do you know if it'd be possible to bypass hw encode and dump
>>> uncompressed HD/SD with this card?
>>> Or is it limited hardware-wise to even do this?
>>>
>>> Cheers,
>>> Jed
>> Hi, could I possibly get a response to this please?
>
> No idea, I have yet to look into this. All things considered I doubt
> it's worth spending time on raw analog when the goal for most people
> is to have the mpeg2/4/wmv hardware encoder working.
>
Huh, but Hauppaguge site says hvr-2200 only does mpeg2 encode?
My rationale was more flexibility by using software encode and free cpu
cycles, I think it would be appealing to quite a few ;-)
good night/morn
next prev parent reply other threads:[~2009-09-08 20:19 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-03 6:00 PCI/e with dual DVB-T + AV-in? Jed
2009-09-03 17:30 ` Jed
2009-09-03 18:26 ` Michael Krufky
2009-09-03 18:27 ` Michael Krufky
2009-09-04 5:18 ` Jed
2009-09-07 18:14 ` Jed
2009-09-08 20:04 ` Jed
2009-09-08 20:07 ` Steven Toth
2009-09-08 20:20 ` Jed [this message]
2009-09-08 23:38 ` Steven Toth
[not found] ` <4AA741BF.7030407@gmail.com>
[not found] ` <4AA7CFB2.2050701@gmail.com>
[not found] ` <4AA92DE5.8040207@gmail.com>
[not found] ` <4AAA713B.3040104@gmail.com>
[not found] ` <4AAA76CB.8080802@gmail.com>
2009-09-11 16:26 ` PCI/e with dual DVB-T + AV-in (HVR-2200?) Steven Toth
[not found] ` <4AAA7923.9000306@gmail.com>
2009-09-11 16:30 ` Michael Krufky
2009-09-04 11:26 ` PCI/e with dual DVB-T + AV-in? Lou Otway
2009-09-04 11:43 ` Jed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AA6BC70.4040007@gmail.com \
--to=jedi.theone@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox