Re: (Saa7134) Re: ADS-Tech Instant TV PCI, no remote support

[Morvan Le Meut <mlemeut@gmail.com>]

Samuel Rakitnican a écrit :
>
> No, this is used for some autodetection routine for different version 
> of the same card. This has nothing to do with your case.
>
> The key is here, you need to find correct value.
>
>     case SAA7134_BOARD_ADS_INSTANT_TV:
>         ir_codes = AdsInstantTvPci_codes;
>         // This remote seems to return 0x7f after each button is pushed.
>         // No button may be repeated ; no release message. Only 1 msg 
> with
>         // raw data = button idx, followed by one message with raw 
> data = 0x7f
>         mask_keycode = 0xffffff;
>         mask_keyup   = 0xffffff;
>         mask_keydown = 0xffffff;
>         polling      = 50; // ms
>         break;
>
> Have you tried to follow the tutorial on the web?, By tutorial you 
> need to modify with something like this:
>
>     case SAA7134_BOARD_ADS_INSTANT_TV:
>         ir_codes = AdsInstantTvPci_codes;
>         mask_keycode = 0;
>         polling      = 50; // ms
>         break;
>
> And then try to find correct gpio masks.
>
i did try it ( well, i left the keyup and keydown part and i also tried 
it by setting it to 0 ) but the gpio still repeat ("saa7133[0]/ir: 
build_key gpio=0x1b mask=0x0 data=0" for Power and Record, each followed 
by gpio=7f ).
Which is why i believe i am missing part of that code ( got the dvb-t 
version too on another computer, and given the software used, there 
should be no duplicate keys ).
I guess i will have to wait for someone to solve the problem. I can at 
least use the remote in a "broken" way.