NetUP Dual DVB-T/C-CI RF PCI-E x1

NetUP Dual DVB-T/C-CI RF PCI-E x1

[Abylai Ospan]

Hello,

We have designed NetUP Dual NetUP Dual DVB-T/C-CI RF PCI-E x1 card. A short
description is available in wiki - http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_T_C_CI_RF 

Features:
* PCI-e x1  
* Supports two DVB-T/DVB-C transponders simultaneously
* Supports two analog audio/video channels simultaneously
* Independent descrambling of two transponders
* Hardware PID filtering

Now we have started the work on the driver for Linux. The following  components used in this card already have their code for Linux published:
* Conexant CX23885, CX25840
* Xceive XC5000 silicon TV tuner

We are working on the code for the following components:
* STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver
* Altera FPGA for Common Interafce. 

We have developed FPGA firmware for CI (according to PCMCIA/en50221). Also we are doing "hardware" PID filtering. It's fast and very flexible. JTAG is used for firmware uploading into FPGA - 
this part contains "JAM player" from Altera for processing JAM STAPL Byte-Code (.jbc files).

The resulting code will be published under GPL after receiving permissions from IC vendors.

-- 
Abylai Ospan <aospan@netup.ru>
NetUP Inc.

P.S.
We will show this card at the upcoming IBC exhibition ( stand IP402 ).

Re: [linux-dvb] NetUP Dual DVB-T/C-CI RF PCI-E x1

[Christian Wattengård]

This sounds promising. I hope you are not going to price yourselves
completely out as a few other DVB-C suppliers have done.
If the price is right (around the same as a normal DVB-T tuner ~$65),
it definitely sounds interesting.

When you say it supports two transponders, is this also true on DVB-C
only... As in DVB-C + DVB-C channel...
If this is the case then I only need 3 cards to cover all the
interesting channels in my cable network ;)
I CAN TIMESHIFT THE WORLD!!! MUHAHAHAhaha... *cough*

But seriously... This sounds very interesting.

Christian from Norway...

On Wed, Sep 9, 2009 at 4:51 PM, Abylai Ospan <aospan@netup.ru> wrote:
> Hello,
>
> We have designed NetUP Dual NetUP Dual DVB-T/C-CI RF PCI-E x1 card. A short
> description is available in wiki - http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_T_C_CI_RF
>
> Features:
> * PCI-e x1
> * Supports two DVB-T/DVB-C transponders simultaneously
> * Supports two analog audio/video channels simultaneously
> * Independent descrambling of two transponders
> * Hardware PID filtering
>
> Now we have started the work on the driver for Linux. The following  components used in this card already have their code for Linux published:
> * Conexant CX23885, CX25840
> * Xceive XC5000 silicon TV tuner
>
> We are working on the code for the following components:
> * STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver
> * Altera FPGA for Common Interafce.
>
> We have developed FPGA firmware for CI (according to PCMCIA/en50221). Also we are doing "hardware" PID filtering. It's fast and very flexible. JTAG is used for firmware uploading into FPGA -
> this part contains "JAM player" from Altera for processing JAM STAPL Byte-Code (.jbc files).
>
> The resulting code will be published under GPL after receiving permissions from IC vendors.
>
> --
> Abylai Ospan <aospan@netup.ru>
> NetUP Inc.
>
> P.S.
> We will show this card at the upcoming IBC exhibition ( stand IP402 ).
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

Re: [linux-dvb] NetUP Dual DVB-T/C-CI RF PCI-E x1

[Lou Otway]

Christian Wattengård wrote:
> This sounds promising. I hope you are not going to price yourselves
> completely out as a few other DVB-C suppliers have done.
> If the price is right (around the same as a normal DVB-T tuner ~$65),
> it definitely sounds interesting.
> 
> When you say it supports two transponders, is this also true on DVB-C
> only... As in DVB-C + DVB-C channel...
> If this is the case then I only need 3 cards to cover all the
> interesting channels in my cable network ;)
> I CAN TIMESHIFT THE WORLD!!! MUHAHAHAhaha... *cough*
> 
> But seriously... This sounds very interesting.
> 
> Christian from Norway...
> 
> On Wed, Sep 9, 2009 at 4:51 PM, Abylai Ospan <aospan@netup.ru> wrote:
>> Hello,
>>
>> We have designed NetUP Dual NetUP Dual DVB-T/C-CI RF PCI-E x1 card. A short
>> description is available in wiki - http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_T_C_CI_RF
>>
>> Features:
>> * PCI-e x1
>> * Supports two DVB-T/DVB-C transponders simultaneously
>> * Supports two analog audio/video channels simultaneously
>> * Independent descrambling of two transponders
>> * Hardware PID filtering
>>
>> Now we have started the work on the driver for Linux. The following  components used in this card already have their code for Linux published:
>> * Conexant CX23885, CX25840
>> * Xceive XC5000 silicon TV tuner
>>
>> We are working on the code for the following components:
>> * STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver
>> * Altera FPGA for Common Interafce.
>>
>> We have developed FPGA firmware for CI (according to PCMCIA/en50221). Also we are doing "hardware" PID filtering. It's fast and very flexible. JTAG is used for firmware uploading into FPGA -
>> this part contains "JAM player" from Altera for processing JAM STAPL Byte-Code (.jbc files).
>>
>> The resulting code will be published under GPL after receiving permissions from IC vendors.
>>
>> --
>> Abylai Ospan <aospan@netup.ru>
>> NetUP Inc.
>>
>> P.S.
>> We will show this card at the upcoming IBC exhibition ( stand IP402 ).
>>

The Netup dual DVB-S2 card was around $1000, I doubt the Dual DVB-T will 
be an order of magnitude less expensive.

I'd be interested to know how many they've sold, it seems overpriced to me.

BRs,

Lou