From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:46488 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753647AbZILPPa (ORCPT ); Sat, 12 Sep 2009 11:15:30 -0400 Message-ID: <4AABBB0E.10305@iki.fi> Date: Sat, 12 Sep 2009 18:15:26 +0300 From: Antti Palosaari MIME-Version: 1.0 To: linux-media@vger.kernel.org, matt@pcmus.com Subject: Re: [linux-dvb] Leadtek WinFast DTV Dongle Gold Remote y04g0051 issues References: <003901ca32fd$259ad820$70d08860$@com> In-Reply-To: <003901ca32fd$259ad820$70d08860$@com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 09/11/2009 07:30 PM, Matthew Skinner, PC Mus wrote: > I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and > the y04g0051 remote, after a lot of reading I now have the remote partially > working as only half of the keys are sending codes to "irw" > > I read this thread and noticed that the exact keys which work are the ones > listed with reported codes. > > > > http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html > > > > The keys not mentioned in that thread are the ones not working, so I guess > the extra codes need to be reported to someone to be added into a new build? > > > > Can I help in providing these codes and some testing. You could send missing button codes to me and I will add those to the driver. There is debug switch which shows remote events, it is debug=2. remove driver from memory # rmmod dvb-usb-af9015 # load driver with needed debug modprobe dvb-usb-af9015 debug=2 # look codes from log tail -f /var/log/messages I am not sure if debugs are enabled with your system build, but if not you will need to install and compile current v4l-dvb master. Antti -- http://palosaari.fi/