[linux-dvb] Leadtek WinFast DTV Dongle Gold Remote y04g0051 issues

[linux-dvb] Leadtek WinFast DTV Dongle Gold Remote y04g0051 issues

[Matthew Skinner, PC Mus]

[-- Attachment #1.1: Type: text/plain, Size: 622 bytes --]

Hi,

 

I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and
the y04g0051 remote, after a lot of reading I now have the remote partially
working as only half of the keys are sending codes to "irw"

I read this thread and noticed that the exact keys which work are the ones
listed with reported codes. 

 

http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html

 

The keys not mentioned in that thread are the ones not working, so I guess
the extra codes need to be reported to someone to be added into a new build?

 

Can I help in providing these codes and some testing.

 

Thank you.


[-- Attachment #1.2: Type: text/html, Size: 2602 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Leadtek WinFast DTV Dongle Gold Remote y04g0051 issues

[Antti Palosaari]

On 09/11/2009 07:30 PM, Matthew Skinner, PC Mus wrote:
> I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and
> the y04g0051 remote, after a lot of reading I now have the remote partially
> working as only half of the keys are sending codes to "irw"
>
> I read this thread and noticed that the exact keys which work are the ones
> listed with reported codes.
>
>
>
> http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html
>
>
>
> The keys not mentioned in that thread are the ones not working, so I guess
> the extra codes need to be reported to someone to be added into a new build?
>
>
>
> Can I help in providing these codes and some testing.

You could send missing button codes to me and I will add those to the 
driver. There is debug switch which shows remote events, it is debug=2.

remove driver from memory
# rmmod dvb-usb-af9015

# load driver with needed debug
modprobe dvb-usb-af9015 debug=2

# look codes from log
tail -f /var/log/messages

I am not sure if debugs are enabled with your system build, but if not 
you will need to install and compile current v4l-dvb master.

Antti
-- 
http://palosaari.fi/