From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ey-out-2122.google.com ([74.125.78.25]:24943 "EHLO ey-out-2122.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750786AbZIRGnA (ORCPT ); Fri, 18 Sep 2009 02:43:00 -0400 Received: by ey-out-2122.google.com with SMTP id 25so245310eya.19 for ; Thu, 17 Sep 2009 23:43:03 -0700 (PDT) Message-ID: <4AB32BF2.3090604@gmail.com> Date: Fri, 18 Sep 2009 08:42:58 +0200 From: Claes Lindblom MIME-Version: 1.0 To: "linux-media@vger.kernel.org" CC: claesl@gmail.com Subject: Re: Nova S2 HD scanning problems References: <200909100913.09065.hverkuil@xs4all.nl> <20090916175043.0d462a18@pedra.chehab.org> <200909170834.23449.hverkuil@xs4all.nl> <20090917091104.34806d1e@pedra.chehab.org> <4AB23151.6090409@gmail.com> In-Reply-To: <4AB23151.6090409@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Claes Lindblom wrote: > Hi all, > I have just installed my new Nova S2 HD card on ubuntu x86_64, > 2.6.28-13-generic, changed the > firmware to version 1.23.86.1 and I have also tried version 1.22.82.0. > The result is that I can tune and watch > channels without any problems but when I try to scan for channels it > will not work. > > The card is loaded as adapter 1 so I use the following command to scan > with the latest scan-s2 > sudo ./scan-s2 -a 1 -s 0 -l UNIVERSAL dvb-s/Thor-1.0W > I have made a strange discovery about this. scan-s2 does not work but when I used scan it worked and after that I started a new scan-s2 which suddenly worked. A while later I tried again but it did not work so I had to use scan first and then scan-s2. I think this is really strange when I have succeded with scan-s2 on my other card. Another that appeared with this is that Mythtv 0.22 cannot present any info on the frontend when installing new cards. I know that it migt belong in this mailinglist but it feels like it's connected somehow. > I have a DisEqC switch but I know it's working since I have a > Azurewave AD SP400 card that I have scanned channels before > and also the card can tune in on both LNB's with szap-s2. > > Has anyone ideas about the scanning problems? > > Dmesg does not output anything. > Output of scan-s2: > ----------------------------------> Using DVB-S > >>> tune to: 11216:vC78S0:S0.0W:24500: > DVB-S IF freq is 1466000 > WARNING: >>> tuning failed!!! > >>> tune to: 11216:vC78S0:S0.0W:24500: (tuning failed) > DVB-S IF freq is 1466000 > WARNING: >>> tuning failed!!! > ----------------------------------> Using DVB-S2 > >>> tune to: 11216:vC78S1:S0.0W:24500: > DVB-S IF freq is 1466000 > WARNING: >>> tuning failed!!! > >>> tune to: 11216:vC78S1:S0.0W:24500: (tuning failed) > DVB-S IF freq is 1466000 > WARNING: >>> tuning failed!!! > > > Regards > /Claes >