From: Antti Palosaari <crope@iki.fi>
To: Roman <lists@hasnoname.de>
Cc: "Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>
Subject: Re: MSI Digivox mini III Remote Control
Date: Mon, 21 Sep 2009 17:00:45 +0300 [thread overview]
Message-ID: <4AB7870D.3030300@iki.fi> (raw)
In-Reply-To: <200909211555.11747.lists@hasnoname.de>
Roman wrote:
> Am Monday 21 September 2009 14:35:53 schrieb Antti Palosaari:
>> On 09/21/2009 02:51 PM, Aleksandr V. Piskunov wrote:
>>> Just grab that patch and apply it to the current vl4-dvb, no need to mess
>>> with old repository.
>>> http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921d
>> With this patch remote will not work most likely. But after adding that
>> patch you should see remote events dumped to the /var/log/messages when
>> key is pressed. I need to know which key gives which code. After that I
>> can add correct key mappings to the driver.
>>
>> Antti
>
> I don't get anything else in the logs than this, even with the patch applied:
> #---
> Sep 21 15:43:04 Seth usbcore: registered new interface driver dvb_usb_af9015
> Sep 21 15:43:07 Seth usb 1-5: new high speed USB device using ehci_hcd and
> address 4
> Sep 21 15:43:08 Seth usb 1-5: configuration #1 chosen from 1 choice
> Sep 21 15:43:08 Seth dvb-usb: found a 'MSI Digi VOX mini III' in cold state,
> will try to load a firmware
> Sep 21 15:43:08 Seth usb 1-5: firmware: requesting dvb-usb-af9015.fw
> Sep 21 15:43:08 Seth dvb-usb: downloading firmware from
> file 'dvb-usb-af9015.fw'
> Sep 21 15:43:08 Seth dvb-usb: found a 'MSI Digi VOX mini III' in warm state.
> Sep 21 15:43:08 Seth dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> Sep 21 15:43:08 Seth DVB: registering new adapter (MSI Digi VOX mini III)
> Sep 21 15:43:08 Seth af9013: firmware version:4.95.0
> Sep 21 15:43:08 Seth DVB: registering adapter 0 frontend 0 (Afatech AF9013
> DVB-T)...
> Sep 21 15:43:08 Seth tda18271 3-00c0: creating new instance
> Sep 21 15:43:08 Seth TDA18271HD/C1 detected @ 3-00c0
> Sep 21 15:43:08 Seth dvb-usb: MSI Digi VOX mini III successfully initialized
> and connected.
> Sep 21 15:43:51 Seth [drm] LVDS-8: set mode 1024x768 10
> #---
For reason or the other there is no any mention about remote polling.
Could you enable debug=3 to see what eeprom value is set to remote?
rmmod dvb-usb-af9015; modprobe dvb-usb-af9015 debug=3;
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2009-09-21 14:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200909202026.27086.lists@hasnoname.de>
2009-09-21 8:19 ` MSI Digivox mini III Remote Control Aleksandr V. Piskunov
2009-09-21 10:53 ` Roman
2009-09-21 11:51 ` Aleksandr V. Piskunov
2009-09-21 12:35 ` Antti Palosaari
2009-09-21 13:55 ` Roman
2009-09-21 14:00 ` Antti Palosaari [this message]
2009-09-21 14:10 ` Roman
2009-09-21 14:19 ` Antti Palosaari
2009-09-21 14:31 ` Roman
2009-09-21 18:26 ` Aleksandr V. Piskunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AB7870D.3030300@iki.fi \
--to=crope@iki.fi \
--cc=aleksandr.v.piskunov@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=lists@hasnoname.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox