From: "Németh Márton" <nm127@freemail.hu>
To: Jean-Francois Moine <moinejf@free.fr>,
Hans de Goede <hdegoede@redhat.com>,
V4L Mailing List <linux-media@vger.kernel.org>
Cc: Thomas Kaiser <thomas@kaiser-linux.li>,
Theodore Kilgore <kilgota@auburn.edu>,
Kyle Guinn <elyk03@gmail.com>
Subject: [PATCH 19/21] gspca pac7302/pac7311: extract pac_start_frame
Date: Sun, 01 Nov 2009 00:16:50 +0100 [thread overview]
Message-ID: <4AECC562.9070301@freemail.hu> (raw)
From: Márton Németh <nm127@freemail.hu>
Creating the start of the frame is done in the same way for pac7302
and for pac7311. Extract this common part to the pac_start_frame()
function.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Thomas Kaiser <thomas@kaiser-linux.li>
Cc: Theodore Kilgore <kilgota@auburn.edu>
Cc: Kyle Guinn <elyk03@gmail.com>
---
diff -uprN s/drivers/media/video/gspca/pac7311.c t/drivers/media/video/gspca/pac7311.c
--- s/drivers/media/video/gspca/pac7311.c 2009-10-31 10:21:55.000000000 +0100
+++ t/drivers/media/video/gspca/pac7311.c 2009-10-31 10:20:49.000000000 +0100
@@ -1028,7 +1028,7 @@ static void pac7311_do_autogain(struct g
}
/* JPEG header, part 1 */
-static const unsigned char pac7311_jpeg_header1[] = {
+static const unsigned char pac_jpeg_header1[] = {
0xff, 0xd8, /* SOI: Start of Image */
0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */
@@ -1039,7 +1039,7 @@ static const unsigned char pac7311_jpeg_
};
/* JPEG header, continued */
-static const unsigned char pac7311_jpeg_header2[] = {
+static const unsigned char pac_jpeg_header2[] = {
0x03, /* Number of image components: 3 */
0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */
0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */
@@ -1055,6 +1055,26 @@ static const unsigned char pac7311_jpeg_
0x00 /* Successive approximation: 0 */
};
+static void pac_start_frame(struct gspca_dev *gspca_dev,
+ struct gspca_frame *frame,
+ __u16 lines, __u16 samples_per_line)
+{
+ unsigned char tmpbuf[4];
+
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ pac_jpeg_header1, sizeof(pac_jpeg_header1));
+
+ tmpbuf[0] = lines >> 8;
+ tmpbuf[1] = lines & 0xff;
+ tmpbuf[2] = samples_per_line >> 8;
+ tmpbuf[3] = samples_per_line & 0xff;
+
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ tmpbuf, sizeof(tmpbuf));
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ pac_jpeg_header2, sizeof(pac_jpeg_header2));
+}
+
/* this function is run at interrupt level */
static void pac7302_sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
@@ -1066,7 +1086,6 @@ static void pac7302_sd_pkt_scan(struct g
sof = pac_find_sof(&sd->sof_read, data, len);
if (sof) {
- unsigned char tmpbuf[4];
int n, lum_offset, footer_length;
/* 6 bytes after the FF D9 EOF marker a number of lumination
@@ -1103,18 +1122,9 @@ static void pac7302_sd_pkt_scan(struct g
atomic_set(&sd->avg_lum, -1);
/* Start the new frame with the jpeg header */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1));
-
/* The PAC7302 has the image rotated 90 degrees */
- tmpbuf[0] = gspca_dev->width >> 8;
- tmpbuf[1] = gspca_dev->width & 0xff;
- tmpbuf[2] = gspca_dev->height >> 8;
- tmpbuf[3] = gspca_dev->height & 0xff;
-
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
+ pac_start_frame(gspca_dev, frame,
+ gspca_dev->width, gspca_dev->height);
}
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
@@ -1130,7 +1140,6 @@ static void pac7311_sd_pkt_scan(struct g
sof = pac_find_sof(&sd->sof_read, data, len);
if (sof) {
- unsigned char tmpbuf[4];
int n, lum_offset, footer_length;
/* 6 bytes after the FF D9 EOF marker a number of lumination
@@ -1167,17 +1176,8 @@ static void pac7311_sd_pkt_scan(struct g
atomic_set(&sd->avg_lum, -1);
/* Start the new frame with the jpeg header */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1));
-
- tmpbuf[0] = gspca_dev->height >> 8;
- tmpbuf[1] = gspca_dev->height & 0xff;
- tmpbuf[2] = gspca_dev->width >> 8;
- tmpbuf[3] = gspca_dev->width & 0xff;
-
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
+ pac_start_frame(gspca_dev, frame,
+ gspca_dev->height, gspca_dev->width);
}
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
reply other threads:[~2009-10-31 23:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AECC562.9070301@freemail.hu \
--to=nm127@freemail.hu \
--cc=elyk03@gmail.com \
--cc=hdegoede@redhat.com \
--cc=kilgota@auburn.edu \
--cc=linux-media@vger.kernel.org \
--cc=moinejf@free.fr \
--cc=thomas@kaiser-linux.li \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox