From: Martin Rod <martin.rod@email.cz>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org
Subject: Re: MSI StarCam Racer - No valid video chain found
Date: Wed, 04 Nov 2009 23:03:16 +0100 [thread overview]
Message-ID: <4AF1FA24.4090608@email.cz> (raw)
In-Reply-To: <200911041609.29721.laurent.pinchart@ideasonboard.com>
[-- Attachment #1: Type: text/plain, Size: 961 bytes --]
Hi Laurent,
I send you log file with trace (kernel 2.6.30.9)
I have tried this kernel (on UBNT RouterStation and OpenWrt) with results:
2.6.28.10. - camera works, I tried only snapshots (I have to use
external power for USB, without external power sometimes works,
sometimes no ...)
2.6.31.5 - kernel copmpiles ok, but uvcvideo module was missing, I don't
know why ...
Thanks,
Martin
Laurent Pinchart napsal(a):
> Hi Martin,
>
> On Monday 02 November 2009 21:31:50 Martin Rod wrote:
>
>> Hi Laurent,
>>
>> I send you output of lsusb. I think, that the uvcdriver is the latest. I
>> try older kernel tomorrow.
>>
>
> Could you please load the driver with trace=255 (modprobe uvcvideo trace=255)
> or, if the driver is already loaded, change the trace parameter to 255 (echo
> 255 > /sys/module/uvcvideo/parameters/trace), plug your camera and send me the
> messages printed by the uvcvideo driver to the kernel log?
>
> Thanks.
>
>
[-- Attachment #2: log_trace.txt --]
[-- Type: text/plain, Size: 2013 bytes --]
usb 1-1: USB disconnect, address 3
usb 1-1: new high speed USB device using ar71xx-ehci and address 4
usb 1-1: configuration #1 chosen from 1 choice
uvcvideo: Probing generic UVC device 1
uvcvideo: Found format YUV 4:2:2 (YUYV).
uvcvideo: - 640x480 (30.0 fps)
uvcvideo: - 352x288 (30.0 fps)
uvcvideo: - 320x240 (30.0 fps)
uvcvideo: - 176x144 (30.0 fps)
uvcvideo: - 160x120 (30.0 fps)
uvcvideo: device 4 videostreaminginterface 1 frame index 9 out of range
uvcvideo: Found a Status endpoint (addr 83).
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62e0)
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/2 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/3 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/6 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/7 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/8 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/9 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/10 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/1 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/4 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/5 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/11 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/2 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/3 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/4 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/11 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/13 to device 1 entity 1
uvcvideo: Scanning UVC chain: OT 2 <- XU 5 <- XU 4 <- PU 3 <- IT 1
uvcvideo: No valid video chain found.
next prev parent reply other threads:[~2009-11-04 22:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-01 8:52 MSI StarCam Racer - No valid video chain found Martin Rod
2009-11-02 13:37 ` Laurent Pinchart
2009-11-02 20:31 ` Martin Rod
2009-11-04 15:09 ` Laurent Pinchart
2009-11-04 22:03 ` Martin Rod [this message]
2009-11-11 0:09 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AF1FA24.4090608@email.cz \
--to=martin.rod@email.cz \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox