From: Hans de Goede <hdegoede@redhat.com>
To: "Németh Márton" <nm127@freemail.hu>
Cc: Jean-Francois Moine <moinejf@free.fr>,
V4L Mailing List <linux-media@vger.kernel.org>
Subject: Re: [RFC, PATCH 1/2] gspca: add input support for interrupt endpoints
Date: Thu, 19 Nov 2009 09:52:27 +0100 [thread overview]
Message-ID: <4B05074B.1030407@redhat.com> (raw)
In-Reply-To: <4B04F7E0.1090803@freemail.hu>
Hi Márton,
On 11/19/2009 08:46 AM, Németh Márton wrote:
> From: Márton Németh<nm127@freemail.hu>
>
> Add helper functions for interrupt endpoint based input handling.
>
First of all many many thanks for doing this!
> Signed-off-by: Márton Németh<nm127@freemail.hu>
> ---
> Hi,
>
> maybe a new configuration option should bealso introduced?
I'm personally not a big fan of adding more configuration options,
what should be done instead is make the compilation dependent on the
CONFIG_INPUT kernel config option, I see no reason not to enable this
when CONFIG_INPUT is enabled.
Some other remarks, you are using:
printk(KERN_DEBUG
In various places, please use
PDEBUG(D_FOO
instead so that the output can be controlled using the gspca module's
debug parameter.
And in gspca_input_connect() you are setting name to "pac7302", this
needs to be generalized somehow, and also you are not setting the
input device's parent there, I think we need to fix that too
(although I'm not sure what it should be set to).
Other then that this looks good, I cannot wait till it is merged,
then I can start adding support for the button of all 30+ webcams
I have over here :)
Regards,
Hans
>
> Regards,
>
> Márton Németh
> ---
> diff -r 182b5f8fa160 linux/drivers/media/video/gspca/Makefile
> --- a/linux/drivers/media/video/gspca/Makefile Sun Nov 15 10:05:30 2009 +0100
> +++ b/linux/drivers/media/video/gspca/Makefile Thu Nov 19 08:42:12 2009 +0100
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_USB_GSPCA) += gspca_main.o
> +obj-$(CONFIG_USB_GSPCA) += gspca_input.o
> obj-$(CONFIG_USB_GSPCA_CONEX) += gspca_conex.o
> obj-$(CONFIG_USB_GSPCA_ETOMS) += gspca_etoms.o
> obj-$(CONFIG_USB_GSPCA_FINEPIX) += gspca_finepix.o
> @@ -30,6 +31,7 @@
> obj-$(CONFIG_USB_GSPCA_ZC3XX) += gspca_zc3xx.o
>
> gspca_main-objs := gspca.o
> +gspca_input-objs := input.o
> gspca_conex-objs := conex.o
> gspca_etoms-objs := etoms.o
> gspca_finepix-objs := finepix.o
> diff -r 182b5f8fa160 linux/drivers/media/video/gspca/gspca.c
> --- a/linux/drivers/media/video/gspca/gspca.c Sun Nov 15 10:05:30 2009 +0100
> +++ b/linux/drivers/media/video/gspca/gspca.c Thu Nov 19 08:42:12 2009 +0100
> @@ -40,6 +40,9 @@
> #include<media/v4l2-ioctl.h>
>
> #include "gspca.h"
> +
> +#include<linux/input.h>
> +#include "input.h"
>
> /* global values */
> #define DEF_NURBS 3 /* default number of URBs */
> @@ -499,11 +502,13 @@
> i, ep->desc.bEndpointAddress);
> gspca_dev->alt = i; /* memorize the current alt setting */
> if (gspca_dev->nbalt> 1) {
> + gspca_input_destroy_urb(gspca_dev);
> ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i);
> if (ret< 0) {
> err("set alt %d err %d", i, ret);
> - return NULL;
> + ep = NULL;
> }
> + gspca_input_create_urb(gspca_dev);
> }
> return ep;
> }
> @@ -707,7 +712,9 @@
> if (gspca_dev->sd_desc->stopN)
> gspca_dev->sd_desc->stopN(gspca_dev);
> destroy_urbs(gspca_dev);
> + gspca_input_destroy_urb(gspca_dev);
> gspca_set_alt0(gspca_dev);
> + gspca_input_create_urb(gspca_dev);
> }
>
> /* always call stop0 to free the subdriver's resources */
> @@ -2088,6 +2095,11 @@
>
> usb_set_intfdata(intf, gspca_dev);
> PDEBUG(D_PROBE, "/dev/video%d created", gspca_dev->vdev.num);
> +
> + ret = gspca_input_connect(gspca_dev, id);
> + if (0<= ret)
> + ret = gspca_input_create_urb(gspca_dev);
> +
> return 0;
> out:
> kfree(gspca_dev->usb_buf);
> @@ -2105,6 +2117,7 @@
> void gspca_disconnect(struct usb_interface *intf)
> {
> struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
> + struct input_dev *input_dev;
>
> PDEBUG(D_PROBE, "/dev/video%d disconnect", gspca_dev->vdev.num);
> mutex_lock(&gspca_dev->usb_lock);
> @@ -2113,6 +2126,13 @@
> if (gspca_dev->streaming) {
> destroy_urbs(gspca_dev);
> wake_up_interruptible(&gspca_dev->wq);
> + }
> +
> + gspca_input_destroy_urb(gspca_dev);
> + input_dev = gspca_dev->input_dev;
> + if (input_dev) {
> + gspca_dev->input_dev = NULL;
> + input_unregister_device(input_dev);
> }
>
> /* the device is freed at exit of this function */
> @@ -2140,6 +2160,7 @@
> if (gspca_dev->sd_desc->stopN)
> gspca_dev->sd_desc->stopN(gspca_dev);
> destroy_urbs(gspca_dev);
> + gspca_input_destroy_urb(gspca_dev);
> gspca_set_alt0(gspca_dev);
> if (gspca_dev->sd_desc->stop0)
> gspca_dev->sd_desc->stop0(gspca_dev);
> @@ -2153,6 +2174,7 @@
>
> gspca_dev->frozen = 0;
> gspca_dev->sd_desc->init(gspca_dev);
> + gspca_input_create_urb(gspca_dev);
> if (gspca_dev->streaming)
> return gspca_init_transfer(gspca_dev);
> return 0;
> diff -r 182b5f8fa160 linux/drivers/media/video/gspca/gspca.h
> --- a/linux/drivers/media/video/gspca/gspca.h Sun Nov 15 10:05:30 2009 +0100
> +++ b/linux/drivers/media/video/gspca/gspca.h Thu Nov 19 08:42:12 2009 +0100
> @@ -81,6 +81,9 @@
> typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
> u8 *data,
> int len);
> +typedef int (*cam_int_pkt_op) (struct gspca_dev *gspca_dev,
> + u8 *data,
> + int len);
>
> struct ctrl {
> struct v4l2_queryctrl qctrl;
> @@ -116,6 +119,7 @@
> cam_reg_op get_register;
> #endif
> cam_ident_op get_chip_ident;
> + cam_int_pkt_op int_pkt_scan;
> };
>
> /* packet types when moving from iso buf to frame buf */
> @@ -138,6 +142,7 @@
> struct module *module; /* subdriver handling the device */
> struct usb_device *dev;
> struct file *capt_file; /* file doing video capture */
> + struct input_dev *input_dev;
>
> struct cam cam; /* device information */
> const struct sd_desc *sd_desc; /* subdriver description */
> @@ -147,6 +152,7 @@
> #define USB_BUF_SZ 64
> __u8 *usb_buf; /* buffer for USB exchanges */
> struct urb *urb[MAX_NURBS];
> + struct urb *int_urb;
>
> __u8 *frbuf; /* buffer for nframes */
> struct gspca_frame frame[GSPCA_MAX_FRAMES];
> diff -r 182b5f8fa160 linux/drivers/media/video/gspca/input.c
> --- /dev/null Thu Jan 01 00:00:00 1970 +0000
> +++ b/linux/drivers/media/video/gspca/input.c Thu Nov 19 08:42:12 2009 +0100
> @@ -0,0 +1,193 @@
> +/*
> + * Input handling for gspca USB camera drivers
> + *
> + * Copyright (C) 2009 Márton Németh<nm127@freemail.hu>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software Foundation,
> + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#define MODULE_NAME "gspca_input"
> +
> +#include<linux/init.h>
> +#include<linux/module.h>
> +#include<linux/input.h>
> +
> +#include "gspca.h"
> +#include "input.h"
> +
> +MODULE_AUTHOR("Márton Németh<nm127@freemail.hu>");
> +MODULE_DESCRIPTION("GSPCA USB Camera Input Driver");
> +MODULE_LICENSE("GPL");
> +
> +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 0, 1)
> +
> +#if LINUX_VERSION_CODE< KERNEL_VERSION(2, 6, 19)
> +static void int_irq(struct urb *urb, struct pt_regs *regs)
> +#else
> +static void int_irq(struct urb *urb)
> +#endif
> +{
> + struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context;
> + int ret;
> + int i;
> +
> + printk(KERN_DEBUG "int_irq()\n");
> + printk(KERN_DEBUG "urb->status: %i\n", urb->status);
> + if (urb->status == 0) {
> + printk(KERN_DEBUG "urb->actual_length: %u\n", urb->actual_length);
> + for (i = 0; i< urb->actual_length; i++) {
> + printk(KERN_DEBUG "urb->transfer_buffer[%i]=0x%x\n",
> + i, ((u8*)urb->transfer_buffer)[i]);
> + }
> + if (gspca_dev->sd_desc->int_pkt_scan(gspca_dev,
> + urb->transfer_buffer, urb->actual_length)< 0) {
> + printk(KERN_DEBUG "Unknown packet received\n");
> + }
> +
> + ret = usb_submit_urb(urb, GFP_ATOMIC);
> + printk(KERN_DEBUG "resubmit urb: %i\n", ret);
> + }
> +
> +}
> +
> +int gspca_input_connect(struct gspca_dev *gspca_dev, const struct usb_device_id *id)
> +{
> + struct input_dev *input_dev;
> + int err = 0;
> +
> + gspca_dev->input_dev = NULL;
> + if (gspca_dev->sd_desc->int_pkt_scan) {
> + printk(KERN_DEBUG "allocating input device\n");
> + input_dev = input_allocate_device();
> + if (!input_dev)
> + return -ENOMEM;
> +
> + input_dev->name = "pac7302";
> + //input_dev->phys = "camera";
> + input_dev->id.bustype = BUS_USB;
> + input_dev->id.vendor = le16_to_cpu(id->idVendor);
> + input_dev->id.product = le16_to_cpu(id->idProduct);
> + input_dev->id.version = le16_to_cpu(id->bcdDevice_hi);
> + //input_dev->id.version = le16_to_cpu(id->bcdDevice_lo);
> +
> + input_dev->evbit[0] = BIT_MASK(EV_KEY);
> + input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
> + //input_dev->dev.parent = ;
> +
> + printk(KERN_DEBUG "registering input device\n");
> + err = input_register_device(input_dev);
> + if (err) {
> + printk(KERN_DEBUG "input device registration failed\n");
> + input_dev->dev.parent = NULL;
> + input_free_device(input_dev);
> + } else {
> + gspca_dev->input_dev = input_dev;
> + }
> + }
> +
> + return err;
> +}
> +EXPORT_SYMBOL(gspca_input_connect);
> +
> +int gspca_input_create_urb(struct gspca_dev *gspca_dev)
> +{
> + int ret = -EINVAL;
> + struct usb_interface *intf;
> + struct usb_host_interface *intf_desc;
> + struct usb_endpoint_descriptor *ep;
> + int i;
> + struct urb *urb;
> + void* buffer = NULL;
> + unsigned int buffer_len;
> + int interval;
> + struct usb_device *dev;
> +
> + if (gspca_dev->sd_desc->int_pkt_scan) {
> + intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
> + intf_desc = intf->cur_altsetting;
> + for (i = 0; i< intf_desc->desc.bNumEndpoints; i++) {
> + ep =&intf_desc->endpoint[i].desc;
> + if ((ep->bEndpointAddress& USB_DIR_IN)&&
> + ((ep->bmAttributes& USB_ENDPOINT_XFERTYPE_MASK)
> + == USB_ENDPOINT_XFER_INT)) {
> +
> + buffer_len = ep->wMaxPacketSize;
> + interval = ep->bInterval;
> + printk(KERN_DEBUG "found int in endpoint: 0x%x\n", ep->bEndpointAddress);
> + printk(KERN_DEBUG " - buffer_len = %u\n", buffer_len);
> + printk(KERN_DEBUG " - interval = %u\n", interval);
> +
> + dev = gspca_dev->dev;
> + gspca_dev->int_urb = NULL;
> +
> + buffer = kmalloc(ep->wMaxPacketSize, GFP_KERNEL);
> + if (buffer)
> + urb = usb_alloc_urb(0, GFP_KERNEL);
> + else {
> + printk(KERN_DEBUG "buffer allocation failed\n");
> + kfree(buffer);
> + urb = NULL;
> + }
> + if (buffer&& urb) {
> + usb_fill_int_urb(urb, dev,
> + usb_rcvintpipe(dev, ep->bEndpointAddress),
> + buffer, buffer_len,
> + int_irq, (void*)gspca_dev, interval);
> + gspca_dev->int_urb = urb;
> + ret = usb_submit_urb(urb, GFP_KERNEL);
> + printk(KERN_DEBUG "usb_submit_urb() returns %i\n", ret);
> + } else
> + printk(KERN_DEBUG "URB allocation failed\n");
> +
> + }
> +
> + }
> + }
> + return ret;
> +}
> +EXPORT_SYMBOL(gspca_input_create_urb);
> +
> +void gspca_input_destroy_urb(struct gspca_dev *gspca_dev)
> +{
> + struct urb *urb;
> +
> + urb = gspca_dev->int_urb;
> + if (urb) {
> + gspca_dev->int_urb = NULL;
> + usb_kill_urb(urb);
> + usb_buffer_free(gspca_dev->dev,
> + urb->transfer_buffer_length,
> + urb->transfer_buffer,
> + urb->transfer_dma);
> + usb_free_urb(urb);
> + }
> +}
> +EXPORT_SYMBOL(gspca_input_destroy_urb);
> +
> +static int __init gspca_input_init(void)
> +{
> + info("v%d.%d.%d registered",
> + (DRIVER_VERSION_NUMBER>> 16)& 0xff,
> + (DRIVER_VERSION_NUMBER>> 8)& 0xff,
> + DRIVER_VERSION_NUMBER& 0xff);
> + return 0;
> +}
> +static void __exit gspca_input_exit(void)
> +{
> + info("deregistered");
> +}
> +
> +module_init(gspca_input_init);
> +module_exit(gspca_input_exit);
> diff -r 182b5f8fa160 linux/drivers/media/video/gspca/input.h
> --- /dev/null Thu Jan 01 00:00:00 1970 +0000
> +++ b/linux/drivers/media/video/gspca/input.h Thu Nov 19 08:42:12 2009 +0100
> @@ -0,0 +1,30 @@
> +/*
> + * Input handling for gspca USB camera drivers
> + *
> + * Copyright (C) 2009 Márton Németh<nm127@freemail.hu>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software Foundation,
> + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef GSPCA_INPUT_H
> +#define GSPCA_INPUT_H
> +
> +#include "gspca.h"
> +
> +int gspca_input_connect(struct gspca_dev *gspca_dev, const struct usb_device_id *id);
> +int gspca_input_create_urb(struct gspca_dev *gspca_dev);
> +void gspca_input_destroy_urb(struct gspca_dev *gspca_dev);
> +
> +#endif
next prev parent reply other threads:[~2009-11-19 8:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-19 7:46 [RFC, PATCH 1/2] gspca: add input support for interrupt endpoints Németh Márton
2009-11-19 8:52 ` Hans de Goede [this message]
2009-11-20 7:14 ` Németh Márton
2009-11-20 9:19 ` Jean-Francois Moine
2009-11-21 11:16 ` Németh Márton
2009-11-22 15:49 ` Németh Márton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B05074B.1030407@redhat.com \
--to=hdegoede@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=moinejf@free.fr \
--cc=nm127@freemail.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox