From: Matthias Fechner <idefix@fechner.net>
To: Andy Walls <awalls@radix.net>
Cc: "Igor M. Liplianin" <liplianin@me.by>, linux-media@vger.kernel.org
Subject: Re: IR Receiver on an Tevii S470
Date: Sun, 06 Dec 2009 23:36:57 +0100 [thread overview]
Message-ID: <4B1C3209.20000@fechner.net> (raw)
In-Reply-To: <1260135654.3101.15.camel@palomino.walls.org>
[-- Attachment #1: Type: text/plain, Size: 623 bytes --]
Hi Andy,
Andy Walls wrote:
>
> 1. Does the remote for the TeVii S470 use the same codes as
>
> linux/drivers/media/common/ir-keymaps.c : ir_codes_tevii_nec[]
>
> or some other remote code table we have in the kernel?
>
I don't know how it should work with the kernel but I use the remote
together with lirc with the attached config files.
Maybe that helps you a little bit.
Bye,
Matthias
--
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the universe trying to produce bigger and better idiots. So far, the universe is winning." -- Rich Cook
[-- Attachment #2: lirc-tevii.conf --]
[-- Type: text/plain, Size: 2615 bytes --]
#
# this config file was automatically generated
# using lirc-0.8.4(default) on Sun Jul 12 12:05:06 2009
#
# contributed by
#
# brand: TeVii
# model no. of remote control:
# devices being controlled by this remote: TeVii S650 DVB-S2 USB
#
begin remote
name TeVii_S470
bits 16
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9032 4440
one 594 1651
zero 594 527
ptrail 592
repeat 9032 2212
pre_data_bits 16
pre_data 0xFF
gap 107715
toggle_bit_mask 0x8000
begin codes
Power 0x50AF
Mute 0x30CF
1 0x8877
2 0x48B7
3 0xC837
4 0x28D7
5 0xA857
6 0x6897
7 0xE817
8 0x18E7
9 0x9867
0 0x08F7
recall 0x58A7
fav 0xD827
Vol+ 0x906F
Vol- 0xF00F
Chan+ 0x10EF
Chan- 0x609F
ModeLive 0xA05F
ModePlay 0xE01F
Up 0x00FF
Down 0x807F
Left 0xC03F
Right 0x40BF
Ok 0xF807
Menu 0x38C7
Back 0xB847
Play 0x02FD
FastRew 0x7887
FastFwd 0xB24D
EPG 0x22DD
Rec 0x20DF
Timer 0xD02F
Open 0x708F
Info 0x32CD
a/b 0x827D
Audio 0xC23D
subs 0xA25D
List 0x52AD
F1 0x629D
F2 0xE21D
F3 0x7A85
F4 0x3AC5
F5 0x4AB5
F6 0x5AA5
mom 0x6A95
fs 0x1AE5
end codes
end remote
next prev parent reply other threads:[~2009-12-06 22:37 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-18 20:31 IR Receiver on an Tevii S470 Matthias Fechner
2009-11-21 17:10 ` Matthias Fechner
2009-11-21 20:41 ` Andy Walls
2009-11-21 22:19 ` Jonas Kvinge
2009-11-22 1:03 ` Igor M. Liplianin
2009-11-22 2:48 ` Andy Walls
2009-11-22 18:08 ` Matthias Fechner
2009-11-22 20:11 ` Andy Walls
2009-11-22 20:25 ` Matthias Fechner
2009-11-22 20:32 ` Jean Delvare
2009-11-23 0:17 ` Andy Walls
2009-11-23 8:54 ` Jean Delvare
2009-11-25 0:25 ` Andy Walls
2009-11-26 16:43 ` Matthias Fechner
2009-11-29 14:22 ` Andy Walls
2009-11-22 20:26 ` Jean Delvare
2009-11-22 22:29 ` Igor M. Liplianin
2009-11-22 23:40 ` Andy Walls
2009-12-06 21:40 ` Andy Walls
2009-12-06 22:36 ` Matthias Fechner [this message]
2009-12-07 1:23 ` Igor M. Liplianin
2009-12-07 3:35 ` Andy Walls
2009-12-08 17:59 ` Igor M. Liplianin
2009-12-09 11:47 ` Andy Walls
2009-12-09 15:54 ` Igor M. Liplianin
2009-12-10 1:12 ` Andy Walls
2009-12-10 16:16 ` Igor M. Liplianin
2009-12-11 2:32 ` Andy Walls
-- strict thread matches above, loose matches on Subject: below --
2009-11-23 0:15 Igor M. Liplianin
2009-12-12 0:30 Igor M. Liplianin
2009-12-12 1:00 ` Andy Walls
2009-12-12 1:42 ` Igor M. Liplianin
2009-12-12 2:58 ` Andy Walls
2009-12-12 11:49 ` Igor M. Liplianin
2009-12-12 14:15 ` Andy Walls
2009-12-12 16:01 ` Igor M. Liplianin
2009-12-12 16:22 ` Igor M. Liplianin
2009-12-12 16:59 ` Andy Walls
2009-12-31 12:46 ` Guillem Solà Aranda
2009-12-31 15:23 ` Igor M. Liplianin
2010-01-06 21:21 ` Andreas Tschirpke
2010-01-07 0:44 ` Andy Walls
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B1C3209.20000@fechner.net \
--to=idefix@fechner.net \
--cc=awalls@radix.net \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox