* Pinnacle Hybrid Pro Stick USB scan problems
@ 2009-12-14 19:05 Andreas Lunderhage
2009-12-14 19:34 ` Devin Heitmueller
0 siblings, 1 reply; 4+ messages in thread
From: Andreas Lunderhage @ 2009-12-14 19:05 UTC (permalink / raw)
To: video4linux-list
Hi,
I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When
using the scan command, it finds the channels in the first mux in the
mux file but it fails to tune the next ones. If I use Kaffeine to scan,
it gives the same result but I can also see that the signal strength
shows 99% on those muxes it fails to scan.
I thinks this is a problem with the tuning since if I watch one channel
and switch to another (on another mux), it fails to tune. If I stop the
viewing of the current channel first, then it will succeed tuning the next.
I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code
built from the repository today.
I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another
machine), but it gives the same problem.
BR
/Andreas
Output from scan:
scanning /usr/share/dvb/dvb-t/se-Stockholm_Nacka
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 490000000 0 2 9 3 1 2 0
initial transponder 642000000 0 2 9 3 1 2 0
initial transponder 754000000 0 2 9 3 1 2 0
initial transponder 706000000 0 2 9 3 1 2 0
initial transponder 746000000 0 2 9 3 1 2 0
initial transponder 730000000 0 2 9 3 1 2 0
>>> tune to:
490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
Network Name 'Teracom_Mux_1'
0x0000 0x04d8: pmt_pid 0x04d8 Sveriges Television -- SVT24 (running)
0x0000 0x161c: pmt_pid 0x161c Sveriges Television -- SVT2 Sörmland
(running)
0x0000 0x168a: pmt_pid 0x168a Sveriges Television -- SVT1 ABC (running)
0x0000 0x16da: pmt_pid 0x16da Sveriges Television -- SVT1 Sörmland
(running)
0x0000 0x1586: pmt_pid 0x1586 Sveriges Television -- SVT2 ABC (running)
0x0000 0x0bc2: pmt_pid 0x0bc2 SR -- SR-P1 (running)
0x0000 0x0bcc: pmt_pid 0x0bcc SR -- SR-P2 Musik (running)
0x0000 0x0bd6: pmt_pid 0x0bd6 SR -- SR-P3 (running)
0x0000 0x0366: pmt_pid 0x0366 Sveriges Television -- Barn/Kunskapsk.
(running)
0x0000 0x0500: pmt_pid 0x0500 Sveriges Television -- SVT1 Tal txt (running)
0x0000 0x050a: pmt_pid 0x050a Sveriges Television -- SVT2 Tal txt (running)
0x0000 0xfffe: pmt_pid 0x0712 Boxer TV Access AB -- Boxer Navigator
(running, scrambled)
>>> tune to:
642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
dumping lists (12 services)
Done.
SVT24:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1249:1248:1240
SVT2
Sörmland:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1029:1028:5660
SVT1
ABC:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1019:1018:5770
SVT1
Sörmland:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1019:1018:5850
SVT2
ABC:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1029:1028:5510
SR-P1:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3018:3010
SR-P2
Musik:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3028:3020
SR-P3:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3038:3030
Barn/Kunskapsk.:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:879:878:870
SVT2 Tal
txt:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1299:1026:1290
SVT1 Tal
txt:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1289:1016:1280
Boxer
Navigator:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:65534
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pinnacle Hybrid Pro Stick USB scan problems
2009-12-14 19:05 Pinnacle Hybrid Pro Stick USB scan problems Andreas Lunderhage
@ 2009-12-14 19:34 ` Devin Heitmueller
2009-12-19 11:46 ` Andreas Lunderhage
0 siblings, 1 reply; 4+ messages in thread
From: Devin Heitmueller @ 2009-12-14 19:34 UTC (permalink / raw)
To: Andreas Lunderhage; +Cc: video4linux-list
On Mon, Dec 14, 2009 at 2:05 PM, Andreas Lunderhage <lunderhage@home.se> wrote:
> Hi,
>
> I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When
> using the scan command, it finds the channels in the first mux in the mux
> file but it fails to tune the next ones. If I use Kaffeine to scan, it gives
> the same result but I can also see that the signal strength shows 99% on
> those muxes it fails to scan.
>
> I thinks this is a problem with the tuning since if I watch one channel and
> switch to another (on another mux), it fails to tune. If I stop the viewing
> of the current channel first, then it will succeed tuning the next.
>
> I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code
> built from the repository today.
> I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine),
> but it gives the same problem.
First, make sure you are running the latest v4l-dvb code (instructions
at http://linuxtv.org/repo), and then try commenting out line 181 of
em28xx-cards.c and see if that fixes the issue.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pinnacle Hybrid Pro Stick USB scan problems
2009-12-14 19:34 ` Devin Heitmueller
@ 2009-12-19 11:46 ` Andreas Lunderhage
2009-12-19 20:12 ` Douglas Schilling Landgraf
0 siblings, 1 reply; 4+ messages in thread
From: Andreas Lunderhage @ 2009-12-19 11:46 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: video4linux-list
There is a missing header file in the repo...
/home/lunderhage/v4l-dvb/v4l/radio-miropcm20.c:20:23: error:
sound/aci.h: No such file or directory
Can someone push that file into the repo or send it to me, please?
BR
/Andreas
Devin Heitmueller wrote:
> On Mon, Dec 14, 2009 at 2:05 PM, Andreas Lunderhage <lunderhage@home.se> wrote:
>
>> Hi,
>>
>> I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When
>> using the scan command, it finds the channels in the first mux in the mux
>> file but it fails to tune the next ones. If I use Kaffeine to scan, it gives
>> the same result but I can also see that the signal strength shows 99% on
>> those muxes it fails to scan.
>>
>> I thinks this is a problem with the tuning since if I watch one channel and
>> switch to another (on another mux), it fails to tune. If I stop the viewing
>> of the current channel first, then it will succeed tuning the next.
>>
>> I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code
>> built from the repository today.
>> I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine),
>> but it gives the same problem.
>>
>
> First, make sure you are running the latest v4l-dvb code (instructions
> at http://linuxtv.org/repo), and then try commenting out line 181 of
> em28xx-cards.c and see if that fixes the issue.
>
> Devin
>
>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pinnacle Hybrid Pro Stick USB scan problems
2009-12-19 11:46 ` Andreas Lunderhage
@ 2009-12-19 20:12 ` Douglas Schilling Landgraf
0 siblings, 0 replies; 4+ messages in thread
From: Douglas Schilling Landgraf @ 2009-12-19 20:12 UTC (permalink / raw)
To: Andreas Lunderhage; +Cc: Devin Heitmueller, linux-media
Hi Andreas,
On 12/19/2009 06:46 AM, Andreas Lunderhage wrote:
> There is a missing header file in the repo...
>
> /home/lunderhage/v4l-dvb/v4l/radio-miropcm20.c:20:23: error:
> sound/aci.h: No such file or directory
>
> Can someone push that file into the repo or send it to me, please?
>
Thanks for your report.
Please add into v4l/versions.txt file:
[2.6.33]
RADIO_MIROPCM20
then
make distclean
make
make rmmod
make install
Cheers
Douglas
> BR
> /Andreas
>
> Devin Heitmueller wrote:
>> On Mon, Dec 14, 2009 at 2:05 PM, Andreas Lunderhage
>> <lunderhage@home.se> wrote:
>>> Hi,
>>>
>>> I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When
>>> using the scan command, it finds the channels in the first mux in
>>> the mux
>>> file but it fails to tune the next ones. If I use Kaffeine to scan,
>>> it gives
>>> the same result but I can also see that the signal strength shows
>>> 99% on
>>> those muxes it fails to scan.
>>>
>>> I thinks this is a problem with the tuning since if I watch one
>>> channel and
>>> switch to another (on another mux), it fails to tune. If I stop the
>>> viewing
>>> of the current channel first, then it will succeed tuning the next.
>>>
>>> I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code
>>> built from the repository today.
>>> I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another
>>> machine),
>>> but it gives the same problem.
>>
>> First, make sure you are running the latest v4l-dvb code (instructions
>> at http://linuxtv.org/repo), and then try commenting out line 181 of
>> em28xx-cards.c and see if that fixes the issue.
>>
>> Devin
>>
>
> --
> video4linux-list mailing list
> Unsubscribe
> mailto:video4linux-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-12-19 17:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-14 19:05 Pinnacle Hybrid Pro Stick USB scan problems Andreas Lunderhage
2009-12-14 19:34 ` Devin Heitmueller
2009-12-19 11:46 ` Andreas Lunderhage
2009-12-19 20:12 ` Douglas Schilling Landgraf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox