* High cpu load (dvb_usb_dib0700)
@ 2009-11-27 13:13 Markus Suvanto
2009-12-15 9:02 ` Jan Korbel
0 siblings, 1 reply; 5+ messages in thread
From: Markus Suvanto @ 2009-11-27 13:13 UTC (permalink / raw)
To: linux-media
Hauppauge Nova-T 500 Dual DVB-T generates
high cpu load even if there is nothing going on.
For example:
#!/bin/bash
echo "rmmod dvb_usb_dib0700"
rmmod dvb_usb_dib0700
for ((i=0; i<10; i++))
do
cat /proc/loadavg
sleep 30
done
echo "modprobe dvb_usb_dib0700"
modprobe dvb_usb_dib0700
for ((i=0; i<10; i++))
do
cat /proc/loadavg
sleep 30
done
rmmod dvb_usb_dib0700
0.51 0.50 0.47 1/289 8253
0.51 0.50 0.47 1/289 8261
0.31 0.45 0.45 1/289 8269
0.18 0.41 0.43 1/289 8277
0.11 0.37 0.42 1/289 8285
0.07 0.33 0.40 1/289 8295
0.04 0.30 0.39 1/289 8303
0.26 0.33 0.40 1/288 8312
0.16 0.30 0.38 1/289 8321
0.09 0.27 0.37 1/289 8330
modprobe dvb_usb_dib0700
0.13 0.25 0.36 2/291 8355
0.16 0.24 0.35 1/289 8370
0.64 0.35 0.38 1/289 8378
0.78 0.41 0.40 1/289 8386
0.58 0.40 0.40 1/289 8394
0.35 0.36 0.38 1/289 8404
0.21 0.32 0.37 1/289 8412
0.52 0.39 0.38 1/289 8433
0.84 0.48 0.41 1/289 8441
0.75 0.49 0.42 1/289 8450
Kernel: 2.6.32-rc8 (+
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
drm-linus)
Linux 2.6.32-rc8-00020-g5349ef3 #29 SMP Tue Nov 24 09:52:05 EET 2009
x86_64 AMD Phenom(tm) II X3 705e Processor AuthenticAMD GNU/Linux
Gnu C 4.3.4
Gnu make 3.81
binutils 2.18
util-linux 2.14.2
mount support
module-init-tools 3.5
e2fsprogs 1.41.3
PPP 2.4.4
Linux C Library 2.9
Dynamic linker (ldd) 2.9
Procps 3.2.8
Net-tools 1.60
Kbd 1.13
Sh-utils 7.5
wireless-tools 29
Modules Loaded dvb_usb_dib0700 ipv6 snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss
libafs af_packet bridge stp llc tun bitrev kvm_amd kvm option btrfs
zlib_deflate cryptomgr aead pcompress crypto_blkcipher crc32c
libcrc32c crypto_hash crypto_algapi mt2060 usbserial mousedev usbhid
usbmouse dib7000p dib7000m dib0070 dvb_usb dib3000mc dib8000
dibx000_common dvb_core usb_storage firewire_ohci radeon ohci_hcd
ehci_hcd uhci_hcd ttm firewire_core drm_kms_helper drm usbcore
firmware_class crc_itu_t i2c_algo_bit i2c_piix4 ohci1394 ata_generic
pata_acpi snd_hda_codec_atihdmi ieee1394 processor cfbcopyarea thermal
snd_hda_codec_via i2c_core atl1e thermal_sys snd_hda_intel nls_base
snd_hda_codec pata_atiixp rtc_cmos atkbd snd_pcm floppy snd_timer
rtc_core pcspkr snd rtc_lib sg 8250_pnp cfbimgblt cfbfillrect
soundcore 8250 asus_atk0110 evdev serial_core psmouse snd_page_alloc
hwmon serio_raw button unix ext4 jbd2 crc16 dm_mod raid1 md_mod sd_mod
ahci libata scsi_mod fbcon tileblit crc32 font bitblit softcursor fb
-Markus
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: High cpu load (dvb_usb_dib0700)
2009-11-27 13:13 High cpu load (dvb_usb_dib0700) Markus Suvanto
@ 2009-12-15 9:02 ` Jan Korbel
2009-12-15 11:04 ` Patrick Boettcher
0 siblings, 1 reply; 5+ messages in thread
From: Jan Korbel @ 2009-12-15 9:02 UTC (permalink / raw)
To: Markus Suvanto; +Cc: linux-media
Hello.
I have the same problem. Two tuners "ASUS My Cinema U3000 Mini DVBT Tuner":
Bus 005 Device 004: ID 0b05:171f ASUSTek Computer, Inc.
Bus 005 Device 003: ID 0b05:171f ASUSTek Computer, Inc.
Kernel 2.6.31 and 2.6.32 (debian packages), firmware
dvb-usb-dib0700-1.20.fw. Intel Atom 330 (dualcore CPU).
Since dvb_usb_dib0700 is loaded, server has load 1.00+. After module
unloading it goes down again.
J.
Markus Suvanto wrote:
> Hauppauge Nova-T 500 Dual DVB-T generates
> high cpu load even if there is nothing going on.
> For example:
>
> #!/bin/bash
>
> echo "rmmod dvb_usb_dib0700"
> rmmod dvb_usb_dib0700
>
> for ((i=0; i<10; i++))
> do
> cat /proc/loadavg
> sleep 30
> done
>
> echo "modprobe dvb_usb_dib0700"
> modprobe dvb_usb_dib0700
>
> for ((i=0; i<10; i++))
> do
> cat /proc/loadavg
> sleep 30
> done
>
>
> rmmod dvb_usb_dib0700
> 0.51 0.50 0.47 1/289 8253
> 0.51 0.50 0.47 1/289 8261
> 0.31 0.45 0.45 1/289 8269
> 0.18 0.41 0.43 1/289 8277
> 0.11 0.37 0.42 1/289 8285
> 0.07 0.33 0.40 1/289 8295
> 0.04 0.30 0.39 1/289 8303
> 0.26 0.33 0.40 1/288 8312
> 0.16 0.30 0.38 1/289 8321
> 0.09 0.27 0.37 1/289 8330
> modprobe dvb_usb_dib0700
> 0.13 0.25 0.36 2/291 8355
> 0.16 0.24 0.35 1/289 8370
> 0.64 0.35 0.38 1/289 8378
> 0.78 0.41 0.40 1/289 8386
> 0.58 0.40 0.40 1/289 8394
> 0.35 0.36 0.38 1/289 8404
> 0.21 0.32 0.37 1/289 8412
> 0.52 0.39 0.38 1/289 8433
> 0.84 0.48 0.41 1/289 8441
> 0.75 0.49 0.42 1/289 8450
>
> Kernel: 2.6.32-rc8 (+
> git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
> drm-linus)
>
> Linux 2.6.32-rc8-00020-g5349ef3 #29 SMP Tue Nov 24 09:52:05 EET 2009
> x86_64 AMD Phenom(tm) II X3 705e Processor AuthenticAMD GNU/Linux
>
> Gnu C 4.3.4
> Gnu make 3.81
> binutils 2.18
> util-linux 2.14.2
> mount support
> module-init-tools 3.5
> e2fsprogs 1.41.3
> PPP 2.4.4
> Linux C Library 2.9
> Dynamic linker (ldd) 2.9
> Procps 3.2.8
> Net-tools 1.60
> Kbd 1.13
> Sh-utils 7.5
> wireless-tools 29
> Modules Loaded dvb_usb_dib0700 ipv6 snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss
> libafs af_packet bridge stp llc tun bitrev kvm_amd kvm option btrfs
> zlib_deflate cryptomgr aead pcompress crypto_blkcipher crc32c
> libcrc32c crypto_hash crypto_algapi mt2060 usbserial mousedev usbhid
> usbmouse dib7000p dib7000m dib0070 dvb_usb dib3000mc dib8000
> dibx000_common dvb_core usb_storage firewire_ohci radeon ohci_hcd
> ehci_hcd uhci_hcd ttm firewire_core drm_kms_helper drm usbcore
> firmware_class crc_itu_t i2c_algo_bit i2c_piix4 ohci1394 ata_generic
> pata_acpi snd_hda_codec_atihdmi ieee1394 processor cfbcopyarea thermal
> snd_hda_codec_via i2c_core atl1e thermal_sys snd_hda_intel nls_base
> snd_hda_codec pata_atiixp rtc_cmos atkbd snd_pcm floppy snd_timer
> rtc_core pcspkr snd rtc_lib sg 8250_pnp cfbimgblt cfbfillrect
> soundcore 8250 asus_atk0110 evdev serial_core psmouse snd_page_alloc
> hwmon serio_raw button unix ext4 jbd2 crc16 dm_mod raid1 md_mod sd_mod
> ahci libata scsi_mod fbcon tileblit crc32 font bitblit softcursor fb
>
> -Markus
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: High cpu load (dvb_usb_dib0700)
2009-12-15 9:02 ` Jan Korbel
@ 2009-12-15 11:04 ` Patrick Boettcher
2009-12-15 12:20 ` Markus Suvanto
2009-12-16 7:32 ` Jan Korbel
0 siblings, 2 replies; 5+ messages in thread
From: Patrick Boettcher @ 2009-12-15 11:04 UTC (permalink / raw)
To: Jan Korbel; +Cc: Markus Suvanto, linux-media
Hi,
On Tue, 15 Dec 2009, Jan Korbel wrote:
> Hello.
>
> I have the same problem. Two tuners "ASUS My Cinema U3000 Mini DVBT Tuner":
>
> Bus 005 Device 004: ID 0b05:171f ASUSTek Computer, Inc.
> Bus 005 Device 003: ID 0b05:171f ASUSTek Computer, Inc.
>
> Kernel 2.6.31 and 2.6.32 (debian packages), firmware dvb-usb-dib0700-1.20.fw.
> Intel Atom 330 (dualcore CPU).
Have you tried to load dvb-usb with disable_rc_polling=1 ?
It may or may not help.
If it helps it will necessary to have a look at the ir-polling code to see
whether there is some thing like 'scheduling'.
regards,
--
Patrick
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-12-16 7:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-11-27 13:13 High cpu load (dvb_usb_dib0700) Markus Suvanto
2009-12-15 9:02 ` Jan Korbel
2009-12-15 11:04 ` Patrick Boettcher
2009-12-15 12:20 ` Markus Suvanto
2009-12-16 7:32 ` Jan Korbel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox