* [PATCH 3/4 v11] TVP7002 driver for DM365
@ 2009-11-30 15:51 santiago.nunez
2009-12-15 20:49 ` Hans Verkuil
0 siblings, 1 reply; 10+ messages in thread
From: santiago.nunez @ 2009-11-30 15:51 UTC (permalink / raw)
To: davinci-linux-open-source
Cc: linux-media, nsnehaprabha, m-karicheri2, diego.dompe,
todd.fischer, mgrosen, Santiago Nunez-Corrales
From: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
This patch provides the implementation of the TVP7002 decoder
driver for DM365. Implemented using the V4L2 DV presets API.
Removed shadow register values. Testing shows that the device
needs not to be powered down and up for correct behaviour.
Improved readability.
Signed-off-by: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
---
drivers/media/video/tvp7002.c | 1227 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 1227 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/video/tvp7002.c
diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
new file mode 100644
index 0000000..9ed7b89
--- /dev/null
+++ b/drivers/media/video/tvp7002.c
@@ -0,0 +1,1227 @@
+/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
+ * Digitizer with Horizontal PLL registers
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
+ *
+ * This code is partially based upon the TVP5150 driver
+ * written by Mauro Carvalho Chehab (mchehab@infradead.org),
+ * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
+ * and the TVP7002 driver in the TI LSP 2.10.00.14. Revisions by
+ * Muralidharan Karicheri and Snehaprabha Narnakaje (TI).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/tvp7002.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include "tvp7002_reg.h"
+
+MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
+MODULE_AUTHOR("Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>");
+MODULE_LICENSE("GPL");
+
+/* Module Name */
+#define TVP7002_MODULE_NAME "tvp7002"
+
+/* I2C retry attempts */
+#define I2C_RETRY_COUNT (5)
+
+/* End of registers */
+#define TVP7002_EOR 0x5c
+
+/* Read write definition for registers */
+#define TVP7002_READ 0
+#define TVP7002_WRITE 1
+#define TVP7002_RESERVED 2
+
+/* Interlaced vs progressive mask and shift */
+#define TVP7002_IP_SHIFT 5
+#define TVP7002_INPR_MASK (0x01 << TVP7002_IP_SHIFT)
+
+/* Shift for CPL and LPF registers */
+#define TVP7002_CL_SHIFT 8
+#define TVP7002_CL_MASK 0x0f
+
+/* Debug functions */
+static int debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* Structure for register values */
+struct i2c_reg_value {
+ u8 reg;
+ u8 value;
+ u8 type;
+};
+
+/*
+ * Register default values (according to tvp7002 datasheet)
+ * In the case of read-only registers, the value (0xff) is
+ * never written. R/W functionality is controlled by the
+ * writable bit in the register struct definition.
+ */
+static const struct i2c_reg_value tvp7002_init_default[] = {
+ { TVP7002_CHIP_REV, 0xff, TVP7002_READ },
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x80, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HSYNC_OUT_W, 0x60, TVP7002_WRITE },
+ { TVP7002_B_FINE_GAIN, 0x00, TVP7002_WRITE },
+ { TVP7002_G_FINE_GAIN, 0x00, TVP7002_WRITE },
+ { TVP7002_R_FINE_GAIN, 0x00, TVP7002_WRITE },
+ { TVP7002_B_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
+ { TVP7002_G_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
+ { TVP7002_R_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
+ { TVP7002_SYNC_CTL_1, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_AND_CLAMP_CTL, 0x2e, TVP7002_WRITE },
+ { TVP7002_SYNC_ON_G_THRS, 0x5d, TVP7002_WRITE },
+ { TVP7002_SYNC_SEPARATOR_THRS, 0x47, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_SYNC_DETECT_STAT, 0xff, TVP7002_READ },
+ { TVP7002_OUT_FORMATTER, 0x47, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_1, 0x01, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_2, 0x00, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_3, 0x01, TVP7002_WRITE },
+ { TVP7002_IN_MUX_SEL_1, 0x00, TVP7002_WRITE },
+ { TVP7002_IN_MUX_SEL_2, 0x67, TVP7002_WRITE },
+ { TVP7002_B_AND_G_COARSE_GAIN, 0x77, TVP7002_WRITE },
+ { TVP7002_R_COARSE_GAIN, 0x07, TVP7002_WRITE },
+ { TVP7002_FINE_OFF_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_B_COARSE_OFF, 0x10, TVP7002_WRITE },
+ { TVP7002_G_COARSE_OFF, 0x10, TVP7002_WRITE },
+ { TVP7002_R_COARSE_OFF, 0x10, TVP7002_WRITE },
+ { TVP7002_HSOUT_OUT_START, 0x08, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_4, 0x00, TVP7002_WRITE },
+ { TVP7002_B_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_G_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_R_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_AUTO_LVL_CTL_ENABLE, 0x80, TVP7002_WRITE },
+ { TVP7002_DGTL_ALC_OUT_MSBS, 0xff, TVP7002_READ },
+ { TVP7002_AUTO_LVL_CTL_FILTER, 0x53, TVP7002_WRITE },
+ { 0x29, 0x08, TVP7002_RESERVED },
+ { TVP7002_FINE_CLAMP_CTL, 0x07, TVP7002_WRITE },
+ /* PWR_CTL is controlled only by the probe and reset functions */
+ { TVP7002_PWR_CTL, 0x00, TVP7002_RESERVED },
+ { TVP7002_ADC_SETUP, 0x50, TVP7002_WRITE },
+ { TVP7002_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
+ { TVP7002_SOG_CLAMP, 0x80, TVP7002_WRITE },
+ { TVP7002_RGB_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
+ { TVP7002_SOG_COARSE_CLAMP_CTL, 0x04, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { 0x32, 0x18, TVP7002_RESERVED },
+ { 0x33, 0x60, TVP7002_RESERVED },
+ { TVP7002_MVIS_STRIPPER_W, 0xff, TVP7002_RESERVED },
+ { TVP7002_VSYNC_ALGN, 0x10, TVP7002_WRITE },
+ { TVP7002_SYNC_BYPASS, 0x00, TVP7002_WRITE },
+ { TVP7002_L_FRAME_STAT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_L_FRAME_STAT_MSBS, 0xff, TVP7002_READ },
+ { TVP7002_CLK_L_STAT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_CLK_L_STAT_MSBS, 0xff, TVP7002_READ },
+ { TVP7002_HSYNC_W, 0xff, TVP7002_READ },
+ { TVP7002_VSYNC_W, 0xff, TVP7002_READ },
+ { TVP7002_L_LENGTH_TOL, 0x03, TVP7002_WRITE },
+ { 0x3e, 0x60, TVP7002_RESERVED },
+ { TVP7002_VIDEO_BWTH_CTL, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x1e, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_FBIT_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_FBIT_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_YUV_Y_G_COEF_LSBS, 0xe3, TVP7002_WRITE },
+ { TVP7002_YUV_Y_G_COEF_MSBS, 0x16, TVP7002_WRITE },
+ { TVP7002_YUV_Y_B_COEF_LSBS, 0x4f, TVP7002_WRITE },
+ { TVP7002_YUV_Y_B_COEF_MSBS, 0x02, TVP7002_WRITE },
+ { TVP7002_YUV_Y_R_COEF_LSBS, 0xce, TVP7002_WRITE },
+ { TVP7002_YUV_Y_R_COEF_MSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_YUV_U_G_COEF_LSBS, 0xab, TVP7002_WRITE },
+ { TVP7002_YUV_U_G_COEF_MSBS, 0xf3, TVP7002_WRITE },
+ { TVP7002_YUV_U_B_COEF_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_YUV_U_B_COEF_MSBS, 0x10, TVP7002_WRITE },
+ { TVP7002_YUV_U_R_COEF_LSBS, 0x55, TVP7002_WRITE },
+ { TVP7002_YUV_U_R_COEF_MSBS, 0xfc, TVP7002_WRITE },
+ { TVP7002_YUV_V_G_COEF_LSBS, 0x78, TVP7002_WRITE },
+ { TVP7002_YUV_V_G_COEF_MSBS, 0xf1, TVP7002_WRITE },
+ { TVP7002_YUV_V_B_COEF_LSBS, 0x88, TVP7002_WRITE },
+ { TVP7002_YUV_V_B_COEF_MSBS, 0xfe, TVP7002_WRITE },
+ { TVP7002_YUV_V_R_COEF_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_YUV_V_R_COEF_MSBS, 0x10, TVP7002_WRITE },
+ /* This signals end of register values */
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 480P */
+static const struct i2c_reg_value tvp7002_parms_480P[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0a, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0B, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x03, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x01, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x13, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x13, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 576P */
+static const struct i2c_reg_value tvp7002_parms_576P[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x36, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x18, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x9B, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0F, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 1080I60 */
+static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 1080P60 */
+static const struct i2c_reg_value tvp7002_parms_1080P60[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 1080I50 */
+static const struct i2c_reg_value tvp7002_parms_1080I50[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0xa5, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 720P60 */
+static const struct i2c_reg_value tvp7002_parms_720P60[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x02, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 720P50 */
+static const struct i2c_reg_value tvp7002_parms_720P50[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0c, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Struct list for available formats */
+static const struct v4l2_fmtdesc tvp7002_fmt_list[] = {
+ {
+ .index = 0,
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ .flags = 0,
+ .description = "8-bit UYVY 4:2:2 Format",
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ },
+};
+
+#define NUM_FORMATS ARRAY_SIZE(tvp7002_fmt_list)
+
+/* Preset definition for handling device operation */
+struct tvp7002_preset_definition {
+ struct v4l2_dv_enum_preset p_data;
+ const struct i2c_reg_value *p_settings;
+ enum v4l2_colorspace color_space;
+ enum v4l2_field scanmode;
+ u16 progressive;
+ u16 lines_per_frame;
+ u16 cpl_min;
+ u16 cpl_max;
+};
+
+/* Struct list for digital video presets */
+static const struct tvp7002_preset_definition tvp7002_presets[] = {
+ {
+ {
+ .index = 0,
+ .preset = V4L2_DV_720P60,
+ .name = "720P-60",
+ .width = 1280,
+ .height = 720,
+ },
+ tvp7002_parms_720P60,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_SEQ_TB,
+ 1,
+ 0x2EE,
+ 135,
+ 153
+ },
+ {
+ {
+ .index = 1,
+ .preset = V4L2_DV_1080I60,
+ .name = "1080I-30",
+ .width = 1920,
+ .height = 1080,
+ },
+ tvp7002_parms_1080I60,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_INTERLACED,
+ 0,
+ 0x465,
+ 181,
+ 205
+ },
+ {
+ {
+ .index = 2,
+ .preset = V4L2_DV_1080I50,
+ .name = "1080I-25",
+ .width = 1920,
+ .height = 1080,
+ },
+ tvp7002_parms_1080I50,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_INTERLACED,
+ 0,
+ 0x465,
+ 217,
+ 245
+ },
+ {
+ {
+ .index = 3,
+ .preset = V4L2_DV_720P50,
+ .name = "720P-50",
+ .width = 1280,
+ .height = 720,
+ },
+ tvp7002_parms_720P50,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_SEQ_TB,
+ 1,
+ 0x2EE,
+ 163,
+ 183
+ },
+ {
+ {
+ .index = 4,
+ .preset = V4L2_DV_1080P60,
+ .name = "1080P-60",
+ .width = 1920,
+ .height = 1080,
+ },
+ tvp7002_parms_1080P60,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_SEQ_TB,
+ 1,
+ 0x465,
+ 90,
+ 102
+ },
+ {
+ {
+ .index = 5,
+ .preset = V4L2_DV_480P59_94,
+ .name = "480P-60",
+ .width = 720,
+ .height = 480,
+ },
+ tvp7002_parms_480P,
+ V4L2_COLORSPACE_SMPTE170M,
+ V4L2_FIELD_SEQ_TB,
+ 1,
+ 0x20D,
+ 0xffff,
+ 0xffff
+ },
+ {
+ {
+ .index = 6,
+ .preset = V4L2_DV_576P50,
+ .name = "576P-50",
+ .width = 720,
+ .height = 576,
+ },
+ tvp7002_parms_576P,
+ V4L2_COLORSPACE_SMPTE170M,
+ V4L2_FIELD_SEQ_TB,
+ 1,
+ 0x271,
+ 0xffff,
+ 0xffff
+ }
+};
+
+#define NUM_PRESETS ARRAY_SIZE(tvp7002_presets)
+
+/* Device definition */
+struct tvp7002 {
+ struct v4l2_subdev sd;
+ const struct tvp7002_config *pdata;
+
+ int ver;
+ int streaming;
+
+ struct v4l2_pix_format pix;
+ const struct tvp7002_preset_definition *current_preset;
+ u8 gain;
+};
+
+/*
+ * to_tvp7002 - Obtain device handler TVP7002
+ * @sd: ptr to v4l2_subdev struct
+ *
+ * Returns device handler tvp7002.
+ */
+static inline struct tvp7002 *to_tvp7002(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct tvp7002, sd);
+}
+
+/*
+ * tvp7002_read - Read a value from a register in an TVP7002
+ * @sd: ptr to v4l2_subdev struct
+ * @reg: TVP7002 register address
+ * @dst: pointer to 8-bit destination
+ *
+ * Returns value read if successful, or non-zero (-1) otherwise.
+ */
+static int tvp7002_read(struct v4l2_subdev *sd, u8 addr, u8 *dst)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ int retry;
+ int error;
+
+ for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
+ error = i2c_smbus_read_byte_data(c, addr);
+
+ if (error >= 0) {
+ *dst = (u8)error;
+ return 0;
+ }
+
+ msleep_interruptible(10);
+ }
+ v4l2_err(sd, "TVP7002 read error %d\n", error);
+ return error;
+}
+
+/*
+ * tvp7002_read_err() - Read a register value with error code
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @reg: destination register
+ * @val: value to be read
+ * @error: pointer to error value
+ *
+ * Read a value in a register and save error value in pointer.
+ * Also update the register table if successful
+ */
+static inline void tvp7002_read_err(struct v4l2_subdev *sd, u8 reg,
+ u8 *dst, int *err)
+{
+ if (!*err)
+ *err = tvp7002_read(sd, reg, dst);
+}
+
+/*
+ * tvp7002_write() - Write a value to a register in TVP7002
+ * @sd: ptr to v4l2_subdev struct
+ * @addr: TVP7002 register address
+ * @value: value to be written to the register
+ *
+ * Write a value to a register in an TVP7002 decoder device.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int tvp7002_write(struct v4l2_subdev *sd, u8 addr, u8 value)
+{
+ struct i2c_client *c;
+ int retry;
+ int error;
+
+ c = v4l2_get_subdevdata(sd);
+
+ for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
+ error = i2c_smbus_write_byte_data(c, addr, value);
+
+ if (error >= 0)
+ return 0;
+
+ v4l2_warn(sd, "Write: retry ... %d\n", retry);
+ msleep_interruptible(10);
+ }
+ v4l2_err(sd, "TVP7002 write error %d\n", error);
+ return error;
+}
+
+/*
+ * tvp7002_write_err() - Write a register value with error code
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @reg: destination register
+ * @val: value to be written
+ * @error: pointer to error value
+ *
+ * Write a value in a register and save error value in pointer.
+ * Also update the register table if successful
+ */
+static inline void tvp7002_write_err(struct v4l2_subdev *sd, u8 reg,
+ u8 val, int *err)
+{
+ if (!*err)
+ *err = tvp7002_write(sd, reg, val);
+}
+
+/*
+ * tvp7002_g_chip_ident() - Get chip identification number
+ * @sd: ptr to v4l2_subdev struct
+ * @chip: ptr to v4l2_dbg_chip_ident struct
+ *
+ * Obtains the chip's identification number.
+ * Returns zero or -EINVAL if read operation fails.
+ */
+static int tvp7002_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ u8 rev;
+ int error;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ error = tvp7002_read(sd, TVP7002_CHIP_REV, &rev);
+
+ if (error < 0)
+ return error;
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP7002, rev);
+}
+
+/*
+ * tvp7002_write_inittab() - Write initialization values
+ * @sd: ptr to v4l2_subdev struct
+ * @regs: ptr to i2c_reg_value struct
+ *
+ * Write initialization values.
+ * Returns zero or -EINVAL if read operation fails.
+ */
+static int tvp7002_write_inittab(struct v4l2_subdev *sd,
+ const struct i2c_reg_value *regs)
+{
+ int error = 0;
+
+ /* Initialize the first (defined) registers */
+ while (TVP7002_EOR != regs->reg) {
+ if (TVP7002_WRITE == regs->type)
+ tvp7002_write_err(sd, regs->reg, regs->value, &error);
+ regs++;
+ }
+
+ return error;
+}
+
+/*
+ * tvp7002_s_dv_preset() - Set digital video preset
+ * @sd: ptr to v4l2_subdev struct
+ * @std: ptr to v4l2_dv_preset struct
+ *
+ * Set the digital video preset for a TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register access fails.
+ */
+static int tvp7002_s_dv_preset(struct v4l2_subdev *sd,
+ struct v4l2_dv_preset *dv_preset)
+{
+ const struct v4l2_dv_enum_preset *preset;
+ struct tvp7002 *device = to_tvp7002(sd);
+ int i;
+
+ for (i = 0; i < NUM_PRESETS; i++) {
+ preset = &tvp7002_presets[i].p_data;
+ if (preset->preset == dv_preset->preset) {
+ device->current_preset = &tvp7002_presets[i];
+ return tvp7002_write_inittab(sd, tvp7002_presets[i].p_settings);
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * tvp7002_g_ctrl() - Get a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_control struct
+ *
+ * Get a control for a TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register access fails.
+ */
+static int tvp7002_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ ctrl->value = device->gain;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * tvp7002_s_ctrl() - Set a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_control struct
+ *
+ * Set a control in TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register access fails.
+ */
+static int tvp7002_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+ int error = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ tvp7002_write_err(sd, TVP7002_R_FINE_GAIN,
+ ctrl->value & 0xff, &error);
+ tvp7002_write_err(sd, TVP7002_G_FINE_GAIN,
+ ctrl->value & 0xff, &error);
+ tvp7002_write_err(sd, TVP7002_B_FINE_GAIN,
+ ctrl->value & 0xff, &error);
+
+ if (error < 0)
+ return -EINVAL;
+
+ /* Set only after knowing there is no error */
+ device->gain = ctrl->value & 0xff;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * tvp7002_queryctrl() - Query a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_queryctrl struct
+ *
+ * Query a control of a TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register read fails.
+ */
+static int tvp7002_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ switch (qc->id) {
+ case V4L2_CID_GAIN:
+ /*
+ * Gain is supported [0-255, default=0, step=1]
+ */
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 0);
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * tvp7002_try_fmt_cap() - V4L2 decoder interface handler for try_fmt
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
+ *
+ * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
+ * ioctl is used to negotiate the image capture size and pixel format
+ * without actually making it take effect.
+ */
+static int tvp7002_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ const struct tvp7002_preset_definition *preset;
+ struct tvp7002 *device = to_tvp7002(sd);
+ struct v4l2_pix_format *pix;
+
+ pix = &f->fmt.pix;
+
+ /* Calculate height and width based on current standard */
+ preset = device->current_preset;
+
+ pix->width = preset->p_data.width;
+ pix->height = preset->p_data.height;
+ pix->pixelformat = V4L2_PIX_FMT_UYVY;
+ pix->field = preset->scanmode;
+ pix->bytesperline = pix->width * 2;
+ pix->sizeimage = pix->bytesperline * pix->height;
+ pix->colorspace = preset->color_space;
+ pix->priv = 0;
+
+ v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d"
+ "Width - %d, Height - %d", "8-bit UYVY 4:2:2 Format",
+ pix->bytesperline, pix->width, pix->height);
+ return 0;
+}
+
+/*
+ * tvp7002_s_fmt() - V4L2 decoder interface handler for s_fmt
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
+ *
+ * If the requested format is supported, configures the HW to use that
+ * format, returns error code if format not supported or HW can't be
+ * correctly configured.
+ */
+static int tvp7002_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct tvp7002 *decoder = to_tvp7002(sd);
+ struct v4l2_pix_format *pix;
+ int rval;
+
+ pix = &f->fmt.pix;
+ rval = tvp7002_try_fmt_cap(sd, f);
+ if (rval)
+ decoder->pix = *pix;
+ return rval;
+}
+
+/*
+ * tvp7002_g_fmt() - V4L2 decoder interface handler for tvp7002_g_fmt
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @f: pointer to standard V4L2 v4l2_format structure
+ *
+ * Returns the decoder's current pixel format in the v4l2_format
+ * parameter.
+ */
+static int tvp7002_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct tvp7002 *decoder = to_tvp7002(sd);
+
+ f->fmt.pix = decoder->pix;
+
+ v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d"
+ "Width - %d, Height - %d",
+ decoder->pix.bytesperline,
+ decoder->pix.width, decoder->pix.height);
+ return 0;
+}
+
+/*
+ * tvp7002_query_dv_preset() - query DV preset
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @std_id: standard V4L2 v4l2_dv_preset
+ *
+ * Returns the current DV preset by TVP7002. If no active input is
+ * detected, returns -EINVAL
+ */
+static int tvp7002_query_dv_preset(struct v4l2_subdev *sd,
+ struct v4l2_dv_preset *qpreset)
+{
+ const struct tvp7002_preset_definition *presets = tvp7002_presets;
+ struct tvp7002 *device;
+ u8 progressive;
+ u32 lpfr;
+ u32 cpln;
+ int error = 0;
+ u8 lpf_lsb;
+ u8 lpf_msb;
+ u8 cpl_lsb;
+ u8 cpl_msb;
+ int index;
+
+ device = to_tvp7002(sd);
+
+ /* Read standards from device registers */
+ tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_LSBS, &lpf_lsb, &error);
+ tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_MSBS, &lpf_msb, &error);
+
+ if (error < 0)
+ return -EINVAL;
+
+ tvp7002_read_err(sd, TVP7002_CLK_L_STAT_LSBS, &cpl_lsb, &error);
+ tvp7002_read_err(sd, TVP7002_CLK_L_STAT_MSBS, &cpl_msb, &error);
+
+ if (error < 0)
+ return -EINVAL;
+
+ /* Get lines per frame, clocks per line and interlaced/progresive */
+ lpfr = lpf_lsb | ((TVP7002_CL_MASK & lpf_msb) << TVP7002_CL_SHIFT);
+ cpln = cpl_lsb | ((TVP7002_CL_MASK & cpl_msb) << TVP7002_CL_SHIFT);
+ progressive = (lpf_msb & TVP7002_INPR_MASK) >> TVP7002_IP_SHIFT;
+
+ /* Do checking of video modes */
+ for (index = 0; index < NUM_PRESETS; index++, presets++)
+ if (lpfr == presets->lines_per_frame &&
+ progressive == presets->progressive) {
+ if (presets->cpl_min == 0xffff)
+ break;
+ if (cpln >= presets->cpl_min && cpln <= presets->cpl_max)
+ break;
+ }
+
+ if (index == NUM_PRESETS) {
+ v4l2_err(sd, "querystd error, lpf = %x, cpl = %x\n",
+ lpfr, cpln);
+ return -EINVAL;
+ }
+
+ /* Set values in found preset */
+ qpreset->preset = presets->p_data.preset;
+
+ /* Update lines per frame and clocks per line info */
+ v4l2_dbg(1, debug, sd, "Current preset: %d %d",
+ presets->p_data.width, presets->p_data.height);
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+/*
+ * tvp7002_g_register() - Get the value of a register
+ * @sd: ptr to v4l2_subdev struct
+ * @vreg: ptr to v4l2_dbg_register struct
+ *
+ * Get the value of a TVP7002 decoder device register.
+ * Returns zero when successful, -EINVAL if register read fails or
+ * access to I2C client fails, -EPERM if the call is not allowed
+ * by diabled CAP_SYS_ADMIN.
+ */
+static int tvp7002_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ return reg->val < 0 ? -EINVAL : 0;
+}
+
+/*
+ * tvp7002_s_register() - set a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_control struct
+ *
+ * Get the value of a TVP7002 decoder device register.
+ * Returns zero when successful or -EINVAL if register read fails.
+ */
+static int tvp7002_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tvp7002 *device = to_tvp7002(sd);
+ int wres;
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ wres = tvp7002_write(sd, reg->reg & 0xff, reg->val & 0xff);
+
+ /* Update the register value in device's table */
+ if (!wres)
+ device->registers[reg->reg].value = reg->val;
+
+ return wres < 0 ? -EINVAL : 0;
+}
+#endif
+
+/*
+ * tvp7002_enum_fmt() - Enum supported formats
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @enable: pointer to format struct
+ *
+ * Enumerate supported formats.
+ */
+
+static int tvp7002_enum_fmt(struct v4l2_subdev *sd,
+ struct v4l2_fmtdesc *fmtdesc)
+{
+ /* Check requested format index is within range */
+ if (fmtdesc->index < 0 || fmtdesc->index >= NUM_FORMATS)
+ return -EINVAL;
+ *fmtdesc = tvp7002_fmt_list[fmtdesc->index];
+
+ return 0;
+}
+
+/*
+ * tvp7002_s_stream() - V4L2 decoder i/f handler for s_stream
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @enable: streaming enable or disable
+ *
+ * Sets streaming to enable or disable, if possible.
+ */
+static int tvp7002_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+ int error = 0;
+
+ if (device->streaming == enable)
+ return 0;
+
+ if (enable) {
+ /* Set output state on (low impedance means stream on) */
+ error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x00);
+ device->streaming = enable;
+ } else {
+ /* Set output state off (high impedance means stream off) */
+ error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x03);
+ if (error) {
+ v4l2_dbg(1, debug, sd, "Unable to stop streaming\n");
+ error = -EINVAL;
+ }
+
+ device->streaming = enable;
+ }
+
+ return error;
+}
+
+/*
+ * tvp7002_log_status() - Print information about register settings
+ * @sd: ptr to v4l2_subdev struct
+ *
+ * Log register values of a TVP7002 decoder device.
+ * Returns zero or -EINVAL if read operation fails.
+ */
+static int tvp7002_log_status(struct v4l2_subdev *sd)
+{
+ const struct tvp7002_preset_definition *presets = tvp7002_presets;
+ struct tvp7002 *device = to_tvp7002(sd);
+ struct v4l2_dv_preset detected;
+ int i;
+
+ /* Find my current standard*/
+ tvp7002_query_dv_preset(sd, &detected);
+
+ /* Print standard related code values */
+ for (i = 0; i < NUM_PRESETS; i++, presets++)
+ if (presets->p_data.preset == detected.preset)
+ break;
+
+ v4l2_info(sd, "Selected DV Preset: %s\n",
+ device->current_preset->p_data.name);
+ v4l2_info(sd, " Pixels per line: %u\n",
+ device->current_preset->p_data.width);
+ v4l2_info(sd, " Lines per frame: %u\n\n",
+ device->current_preset->p_data.height);
+ if (i == NUM_PRESETS) {
+ v4l2_info(sd, "Detected DV Preset: None\n");
+ } else {
+ v4l2_info(sd, "Detected DV Preset: %s\n", presets->p_data.name);
+ v4l2_info(sd, " Pixels per line: %u\n", presets->p_data.width);
+ v4l2_info(sd, " Lines per frame: %u\n\n", presets->p_data.height);
+ }
+ v4l2_info(sd, "Streaming enabled: %s\n",
+ device->streaming ? "yes" : "no");
+
+ /* Print the current value of the gain control */
+ v4l2_info(sd, "Gain: %u\n", device->gain);
+
+ return 0;
+}
+
+/* V4L2 core operation handlers */
+static const struct v4l2_subdev_core_ops tvp7002_core_ops = {
+ .g_chip_ident = tvp7002_g_chip_ident,
+ .log_status = tvp7002_log_status,
+ .g_ctrl = tvp7002_g_ctrl,
+ .s_ctrl = tvp7002_s_ctrl,
+ .queryctrl = tvp7002_queryctrl,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = tvp7002_g_register,
+ .s_register = tvp7002_s_register,
+#endif
+};
+
+/* Specific video subsystem operation handlers */
+static const struct v4l2_subdev_video_ops tvp7002_video_ops = {
+ .s_dv_preset = tvp7002_s_dv_preset,
+ .query_dv_preset = tvp7002_query_dv_preset,
+ .s_stream = tvp7002_s_stream,
+ .g_fmt = tvp7002_g_fmt,
+ .s_fmt = tvp7002_s_fmt,
+ .enum_fmt = tvp7002_enum_fmt,
+};
+
+/* V4L2 top level operation handlers */
+static const struct v4l2_subdev_ops tvp7002_ops = {
+ .core = &tvp7002_core_ops,
+ .video = &tvp7002_video_ops,
+};
+
+static struct tvp7002 tvp7002_dev = {
+ .streaming = 0,
+
+ .pix = {
+ .width = 1280,
+ .height = 720,
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ .field = V4L2_FIELD_NONE,
+ .bytesperline = 1280 * 2,
+ .sizeimage = 1280 * 2 * 720,
+ .colorspace = V4L2_COLORSPACE_REC709,
+ },
+
+ .current_preset = tvp7002_presets,
+ .gain = 0,
+};
+
+/*
+ * tvp7002_probe - Probe a TVP7002 device
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to i2c_device_id struct
+ *
+ * Initialize the TVP7002 device
+ * Returns zero when successful or -EINVAL if register read fails.
+ */
+static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
+{
+ struct v4l2_subdev *sd;
+ struct tvp7002 *device;
+ struct v4l2_dv_preset preset;
+ u32 current_preset;
+ int polarity_a;
+ int polarity_b;
+ u8 revision;
+
+ int error;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(c->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -EIO;
+
+ if (!c->dev.platform_data) {
+ v4l2_err(c, "No platform data!!\n");
+ return -ENODEV;
+ }
+
+ device = kmalloc(sizeof(struct tvp7002), GFP_KERNEL);
+
+ if (!device)
+ return -ENOMEM;
+
+ *device = tvp7002_dev;
+ sd = &device->sd;
+ device->pdata = c->dev.platform_data;
+
+ /* Tell v4l2 the device is ready */
+ v4l2_i2c_subdev_init(sd, c, &tvp7002_ops);
+ v4l_info(c, "tvp7002 found @ 0x%02x (%s)\n",
+ c->addr, c->adapter->name);
+
+ error = tvp7002_read(sd, TVP7002_CHIP_REV, &revision);
+ if (error < 0)
+ goto found_error;
+
+ /* Get revision number */
+ v4l2_info(sd, "Rev. %02x detected.\n", revision);
+ if (revision != 0x02)
+ v4l2_info(sd, "Unknown revision detected.\n");
+
+ /* Initializes TVP7002 to its default values */
+ error = tvp7002_write_inittab(sd, tvp7002_init_default);
+
+ if (error < 0)
+ goto found_error;
+
+ /* Set polarity information after registers have been set */
+ polarity_a = 0x20 | device->pdata->hs_polarity << 5
+ | device->pdata->vs_polarity << 2;
+ error = tvp7002_write(sd, TVP7002_SYNC_CTL_1, polarity_a);
+ if (error < 0)
+ goto found_error;
+
+ polarity_b = 0x01 | device->pdata->fid_polarity << 2
+ | device->pdata->sog_polarity << 1
+ | device->pdata->clk_polarity;
+ error = tvp7002_write(sd, TVP7002_MISC_CTL_3, polarity_b);
+ if (error < 0)
+ goto found_error;
+
+ /* Set registers according to default video mode */
+ current_preset = device->current_preset->p_data.index;
+ preset.preset = tvp7002_presets[current_preset].p_data.preset;
+ error = tvp7002_s_dv_preset(sd, &preset);
+
+ if (error < 0) {
+ kfree(device);
+ return error;
+ }
+
+found_error:
+ return error;
+}
+
+/*
+ * tvp7002_remove - Remove TVP7002 device support
+ * @c: ptr to i2c_client struct
+ *
+ * Reset the TVP7002 device
+ * Returns zero.
+ */
+static int tvp7002_remove(struct i2c_client *c)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(c);
+ struct tvp7002 *device = to_tvp7002(sd);
+
+ v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter"
+ "on address 0x%x\n", c->addr);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(device);
+ return 0;
+}
+
+/* I2C Device ID table */
+static const struct i2c_device_id tvp7002_id[] = {
+ { "tvp7002", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tvp7002_id);
+
+/* I2C driver data */
+static struct i2c_driver tvp7002_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = TVP7002_MODULE_NAME,
+ },
+ .probe = tvp7002_probe,
+ .remove = tvp7002_remove,
+ .id_table = tvp7002_id,
+};
+
+/*
+ * tvp7002_init - Initialize driver via I2C interface
+ *
+ * Register the TVP7002 driver.
+ * Returns 0 on success or < 0 on failure.
+ */
+static int __init tvp7002_init(void)
+{
+ return i2c_add_driver(&tvp7002_driver);
+}
+
+/*
+ * tvp7002_exit - Remove driver via I2C interface
+ *
+ * Unregister the TVP7002 driver.
+ * Returns 0 on success or < 0 on failure.
+ */
+static void __exit tvp7002_exit(void)
+{
+ i2c_del_driver(&tvp7002_driver);
+}
+
+module_init(tvp7002_init);
+module_exit(tvp7002_exit);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 3/4 v11] TVP7002 driver for DM365
2009-11-30 15:51 [PATCH 3/4 v11] TVP7002 driver for DM365 santiago.nunez
@ 2009-12-15 20:49 ` Hans Verkuil
2009-12-15 23:46 ` USB MAssage Storage drivers Gopala Gottumukkala
0 siblings, 1 reply; 10+ messages in thread
From: Hans Verkuil @ 2009-12-15 20:49 UTC (permalink / raw)
To: santiago.nunez
Cc: davinci-linux-open-source, linux-media, nsnehaprabha,
m-karicheri2, diego.dompe, todd.fischer, mgrosen
Hi Santiago,
Some quick review comments:
On Monday 30 November 2009 16:51:53 santiago.nunez@ridgerun.com wrote:
> From: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
>
> This patch provides the implementation of the TVP7002 decoder
> driver for DM365. Implemented using the V4L2 DV presets API.
> Removed shadow register values. Testing shows that the device
> needs not to be powered down and up for correct behaviour.
> Improved readability.
>
> Signed-off-by: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
> ---
> drivers/media/video/tvp7002.c | 1227 +++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 1227 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/video/tvp7002.c
>
> diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
> new file mode 100644
> index 0000000..9ed7b89
> --- /dev/null
> +++ b/drivers/media/video/tvp7002.c
> @@ -0,0 +1,1227 @@
> +/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
> + * Digitizer with Horizontal PLL registers
> + *
> + * Copyright (C) 2009 Texas Instruments Inc
> + * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
> + *
> + * This code is partially based upon the TVP5150 driver
> + * written by Mauro Carvalho Chehab (mchehab@infradead.org),
> + * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
> + * and the TVP7002 driver in the TI LSP 2.10.00.14. Revisions by
> + * Muralidharan Karicheri and Snehaprabha Narnakaje (TI).
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/videodev2.h>
> +#include <media/tvp7002.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-chip-ident.h>
> +#include "tvp7002_reg.h"
> +
> +MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
> +MODULE_AUTHOR("Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>");
> +MODULE_LICENSE("GPL");
> +
> +/* Module Name */
> +#define TVP7002_MODULE_NAME "tvp7002"
> +
> +/* I2C retry attempts */
> +#define I2C_RETRY_COUNT (5)
> +
> +/* End of registers */
> +#define TVP7002_EOR 0x5c
> +
> +/* Read write definition for registers */
> +#define TVP7002_READ 0
> +#define TVP7002_WRITE 1
> +#define TVP7002_RESERVED 2
> +
> +/* Interlaced vs progressive mask and shift */
> +#define TVP7002_IP_SHIFT 5
> +#define TVP7002_INPR_MASK (0x01 << TVP7002_IP_SHIFT)
> +
> +/* Shift for CPL and LPF registers */
> +#define TVP7002_CL_SHIFT 8
> +#define TVP7002_CL_MASK 0x0f
> +
> +/* Debug functions */
> +static int debug;
> +module_param(debug, bool, 0644);
> +MODULE_PARM_DESC(debug, "Debug level (0-2)");
> +
> +/* Structure for register values */
> +struct i2c_reg_value {
> + u8 reg;
> + u8 value;
> + u8 type;
> +};
> +
> +/*
> + * Register default values (according to tvp7002 datasheet)
> + * In the case of read-only registers, the value (0xff) is
> + * never written. R/W functionality is controlled by the
> + * writable bit in the register struct definition.
> + */
> +static const struct i2c_reg_value tvp7002_init_default[] = {
> + { TVP7002_CHIP_REV, 0xff, TVP7002_READ },
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x80, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
> + { TVP7002_HSYNC_OUT_W, 0x60, TVP7002_WRITE },
> + { TVP7002_B_FINE_GAIN, 0x00, TVP7002_WRITE },
> + { TVP7002_G_FINE_GAIN, 0x00, TVP7002_WRITE },
> + { TVP7002_R_FINE_GAIN, 0x00, TVP7002_WRITE },
> + { TVP7002_B_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
> + { TVP7002_G_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
> + { TVP7002_R_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
> + { TVP7002_SYNC_CTL_1, 0x20, TVP7002_WRITE },
> + { TVP7002_HPLL_AND_CLAMP_CTL, 0x2e, TVP7002_WRITE },
> + { TVP7002_SYNC_ON_G_THRS, 0x5d, TVP7002_WRITE },
> + { TVP7002_SYNC_SEPARATOR_THRS, 0x47, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_SYNC_DETECT_STAT, 0xff, TVP7002_READ },
> + { TVP7002_OUT_FORMATTER, 0x47, TVP7002_WRITE },
> + { TVP7002_MISC_CTL_1, 0x01, TVP7002_WRITE },
> + { TVP7002_MISC_CTL_2, 0x00, TVP7002_WRITE },
> + { TVP7002_MISC_CTL_3, 0x01, TVP7002_WRITE },
> + { TVP7002_IN_MUX_SEL_1, 0x00, TVP7002_WRITE },
> + { TVP7002_IN_MUX_SEL_2, 0x67, TVP7002_WRITE },
> + { TVP7002_B_AND_G_COARSE_GAIN, 0x77, TVP7002_WRITE },
> + { TVP7002_R_COARSE_GAIN, 0x07, TVP7002_WRITE },
> + { TVP7002_FINE_OFF_LSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_B_COARSE_OFF, 0x10, TVP7002_WRITE },
> + { TVP7002_G_COARSE_OFF, 0x10, TVP7002_WRITE },
> + { TVP7002_R_COARSE_OFF, 0x10, TVP7002_WRITE },
> + { TVP7002_HSOUT_OUT_START, 0x08, TVP7002_WRITE },
> + { TVP7002_MISC_CTL_4, 0x00, TVP7002_WRITE },
> + { TVP7002_B_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
> + { TVP7002_G_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
> + { TVP7002_R_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
> + { TVP7002_AUTO_LVL_CTL_ENABLE, 0x80, TVP7002_WRITE },
> + { TVP7002_DGTL_ALC_OUT_MSBS, 0xff, TVP7002_READ },
> + { TVP7002_AUTO_LVL_CTL_FILTER, 0x53, TVP7002_WRITE },
> + { 0x29, 0x08, TVP7002_RESERVED },
> + { TVP7002_FINE_CLAMP_CTL, 0x07, TVP7002_WRITE },
> + /* PWR_CTL is controlled only by the probe and reset functions */
> + { TVP7002_PWR_CTL, 0x00, TVP7002_RESERVED },
> + { TVP7002_ADC_SETUP, 0x50, TVP7002_WRITE },
> + { TVP7002_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
> + { TVP7002_SOG_CLAMP, 0x80, TVP7002_WRITE },
> + { TVP7002_RGB_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
> + { TVP7002_SOG_COARSE_CLAMP_CTL, 0x04, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
> + { 0x32, 0x18, TVP7002_RESERVED },
> + { 0x33, 0x60, TVP7002_RESERVED },
> + { TVP7002_MVIS_STRIPPER_W, 0xff, TVP7002_RESERVED },
> + { TVP7002_VSYNC_ALGN, 0x10, TVP7002_WRITE },
> + { TVP7002_SYNC_BYPASS, 0x00, TVP7002_WRITE },
> + { TVP7002_L_FRAME_STAT_LSBS, 0xff, TVP7002_READ },
> + { TVP7002_L_FRAME_STAT_MSBS, 0xff, TVP7002_READ },
> + { TVP7002_CLK_L_STAT_LSBS, 0xff, TVP7002_READ },
> + { TVP7002_CLK_L_STAT_MSBS, 0xff, TVP7002_READ },
> + { TVP7002_HSYNC_W, 0xff, TVP7002_READ },
> + { TVP7002_VSYNC_W, 0xff, TVP7002_READ },
> + { TVP7002_L_LENGTH_TOL, 0x03, TVP7002_WRITE },
> + { 0x3e, 0x60, TVP7002_RESERVED },
> + { TVP7002_VIDEO_BWTH_CTL, 0x01, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x01, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x06, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x1e, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
> + { TVP7002_FBIT_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
> + { TVP7002_FBIT_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
> + { TVP7002_YUV_Y_G_COEF_LSBS, 0xe3, TVP7002_WRITE },
> + { TVP7002_YUV_Y_G_COEF_MSBS, 0x16, TVP7002_WRITE },
> + { TVP7002_YUV_Y_B_COEF_LSBS, 0x4f, TVP7002_WRITE },
> + { TVP7002_YUV_Y_B_COEF_MSBS, 0x02, TVP7002_WRITE },
> + { TVP7002_YUV_Y_R_COEF_LSBS, 0xce, TVP7002_WRITE },
> + { TVP7002_YUV_Y_R_COEF_MSBS, 0x06, TVP7002_WRITE },
> + { TVP7002_YUV_U_G_COEF_LSBS, 0xab, TVP7002_WRITE },
> + { TVP7002_YUV_U_G_COEF_MSBS, 0xf3, TVP7002_WRITE },
> + { TVP7002_YUV_U_B_COEF_LSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_YUV_U_B_COEF_MSBS, 0x10, TVP7002_WRITE },
> + { TVP7002_YUV_U_R_COEF_LSBS, 0x55, TVP7002_WRITE },
> + { TVP7002_YUV_U_R_COEF_MSBS, 0xfc, TVP7002_WRITE },
> + { TVP7002_YUV_V_G_COEF_LSBS, 0x78, TVP7002_WRITE },
> + { TVP7002_YUV_V_G_COEF_MSBS, 0xf1, TVP7002_WRITE },
> + { TVP7002_YUV_V_B_COEF_LSBS, 0x88, TVP7002_WRITE },
> + { TVP7002_YUV_V_B_COEF_MSBS, 0xfe, TVP7002_WRITE },
> + { TVP7002_YUV_V_R_COEF_LSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_YUV_V_R_COEF_MSBS, 0x10, TVP7002_WRITE },
> + /* This signals end of register values */
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Register parameters for 480P */
> +static const struct i2c_reg_value tvp7002_parms_480P[] = {
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0a, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0B, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x03, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x01, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x13, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x13, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Register parameters for 576P */
> +static const struct i2c_reg_value tvp7002_parms_576P[] = {
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x36, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0x18, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x9B, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0F, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Register parameters for 1080I60 */
> +static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Register parameters for 1080P60 */
> +static const struct i2c_reg_value tvp7002_parms_1080P60[] = {
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Register parameters for 1080I50 */
> +static const struct i2c_reg_value tvp7002_parms_1080I50[] = {
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0xa5, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Register parameters for 720P60 */
> +static const struct i2c_reg_value tvp7002_parms_720P60[] = {
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x02, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Register parameters for 720P50 */
> +static const struct i2c_reg_value tvp7002_parms_720P50[] = {
> + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
> + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0c, TVP7002_WRITE },
> + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
> + { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
> + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
> + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
> + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
> + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
> + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
> + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
> + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
> + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
> + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
> + { TVP7002_EOR, 0xff, TVP7002_RESERVED }
> +};
> +
> +/* Struct list for available formats */
> +static const struct v4l2_fmtdesc tvp7002_fmt_list[] = {
> + {
> + .index = 0,
> + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
> + .flags = 0,
> + .description = "8-bit UYVY 4:2:2 Format",
> + .pixelformat = V4L2_PIX_FMT_UYVY,
> + },
> +};
> +
> +#define NUM_FORMATS ARRAY_SIZE(tvp7002_fmt_list)
> +
> +/* Preset definition for handling device operation */
> +struct tvp7002_preset_definition {
> + struct v4l2_dv_enum_preset p_data;
> + const struct i2c_reg_value *p_settings;
> + enum v4l2_colorspace color_space;
> + enum v4l2_field scanmode;
> + u16 progressive;
> + u16 lines_per_frame;
> + u16 cpl_min;
> + u16 cpl_max;
> +};
> +
> +/* Struct list for digital video presets */
> +static const struct tvp7002_preset_definition tvp7002_presets[] = {
> + {
> + {
> + .index = 0,
> + .preset = V4L2_DV_720P60,
> + .name = "720P-60",
> + .width = 1280,
> + .height = 720,
> + },
A few days ago the new helper function from Murali was merged that will allow
you to get rid of the 'struct v4l2_dv_enum_preset p_data'. Instead just call
that new function (v4l_fill_dv_preset_info).
> + tvp7002_parms_720P60,
> + V4L2_COLORSPACE_REC709,
> + V4L2_FIELD_SEQ_TB,
> + 1,
> + 0x2EE,
> + 135,
> + 153
> + },
> + {
> + {
> + .index = 1,
> + .preset = V4L2_DV_1080I60,
> + .name = "1080I-30",
> + .width = 1920,
> + .height = 1080,
> + },
> + tvp7002_parms_1080I60,
> + V4L2_COLORSPACE_REC709,
> + V4L2_FIELD_INTERLACED,
> + 0,
> + 0x465,
> + 181,
> + 205
> + },
> + {
> + {
> + .index = 2,
> + .preset = V4L2_DV_1080I50,
> + .name = "1080I-25",
> + .width = 1920,
> + .height = 1080,
> + },
> + tvp7002_parms_1080I50,
> + V4L2_COLORSPACE_REC709,
> + V4L2_FIELD_INTERLACED,
> + 0,
> + 0x465,
> + 217,
> + 245
> + },
> + {
> + {
> + .index = 3,
> + .preset = V4L2_DV_720P50,
> + .name = "720P-50",
> + .width = 1280,
> + .height = 720,
> + },
> + tvp7002_parms_720P50,
> + V4L2_COLORSPACE_REC709,
> + V4L2_FIELD_SEQ_TB,
> + 1,
> + 0x2EE,
> + 163,
> + 183
> + },
> + {
> + {
> + .index = 4,
> + .preset = V4L2_DV_1080P60,
> + .name = "1080P-60",
> + .width = 1920,
> + .height = 1080,
> + },
> + tvp7002_parms_1080P60,
> + V4L2_COLORSPACE_REC709,
> + V4L2_FIELD_SEQ_TB,
> + 1,
> + 0x465,
> + 90,
> + 102
> + },
> + {
> + {
> + .index = 5,
> + .preset = V4L2_DV_480P59_94,
> + .name = "480P-60",
> + .width = 720,
> + .height = 480,
> + },
> + tvp7002_parms_480P,
> + V4L2_COLORSPACE_SMPTE170M,
> + V4L2_FIELD_SEQ_TB,
> + 1,
> + 0x20D,
> + 0xffff,
> + 0xffff
> + },
> + {
> + {
> + .index = 6,
> + .preset = V4L2_DV_576P50,
> + .name = "576P-50",
> + .width = 720,
> + .height = 576,
> + },
> + tvp7002_parms_576P,
> + V4L2_COLORSPACE_SMPTE170M,
> + V4L2_FIELD_SEQ_TB,
> + 1,
> + 0x271,
> + 0xffff,
> + 0xffff
> + }
> +};
> +
> +#define NUM_PRESETS ARRAY_SIZE(tvp7002_presets)
> +
> +/* Device definition */
> +struct tvp7002 {
> + struct v4l2_subdev sd;
> + const struct tvp7002_config *pdata;
> +
> + int ver;
> + int streaming;
> +
> + struct v4l2_pix_format pix;
> + const struct tvp7002_preset_definition *current_preset;
> + u8 gain;
> +};
> +
> +/*
> + * to_tvp7002 - Obtain device handler TVP7002
> + * @sd: ptr to v4l2_subdev struct
> + *
> + * Returns device handler tvp7002.
> + */
> +static inline struct tvp7002 *to_tvp7002(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct tvp7002, sd);
> +}
> +
> +/*
> + * tvp7002_read - Read a value from a register in an TVP7002
> + * @sd: ptr to v4l2_subdev struct
> + * @reg: TVP7002 register address
> + * @dst: pointer to 8-bit destination
> + *
> + * Returns value read if successful, or non-zero (-1) otherwise.
> + */
> +static int tvp7002_read(struct v4l2_subdev *sd, u8 addr, u8 *dst)
> +{
> + struct i2c_client *c = v4l2_get_subdevdata(sd);
> + int retry;
> + int error;
> +
> + for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
> + error = i2c_smbus_read_byte_data(c, addr);
> +
> + if (error >= 0) {
> + *dst = (u8)error;
> + return 0;
> + }
> +
> + msleep_interruptible(10);
> + }
> + v4l2_err(sd, "TVP7002 read error %d\n", error);
> + return error;
> +}
> +
> +/*
> + * tvp7002_read_err() - Read a register value with error code
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @reg: destination register
> + * @val: value to be read
> + * @error: pointer to error value
> + *
> + * Read a value in a register and save error value in pointer.
> + * Also update the register table if successful
> + */
> +static inline void tvp7002_read_err(struct v4l2_subdev *sd, u8 reg,
> + u8 *dst, int *err)
> +{
> + if (!*err)
> + *err = tvp7002_read(sd, reg, dst);
> +}
> +
> +/*
> + * tvp7002_write() - Write a value to a register in TVP7002
> + * @sd: ptr to v4l2_subdev struct
> + * @addr: TVP7002 register address
> + * @value: value to be written to the register
> + *
> + * Write a value to a register in an TVP7002 decoder device.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int tvp7002_write(struct v4l2_subdev *sd, u8 addr, u8 value)
> +{
> + struct i2c_client *c;
> + int retry;
> + int error;
> +
> + c = v4l2_get_subdevdata(sd);
> +
> + for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
> + error = i2c_smbus_write_byte_data(c, addr, value);
> +
> + if (error >= 0)
> + return 0;
> +
> + v4l2_warn(sd, "Write: retry ... %d\n", retry);
> + msleep_interruptible(10);
> + }
> + v4l2_err(sd, "TVP7002 write error %d\n", error);
> + return error;
> +}
> +
> +/*
> + * tvp7002_write_err() - Write a register value with error code
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @reg: destination register
> + * @val: value to be written
> + * @error: pointer to error value
> + *
> + * Write a value in a register and save error value in pointer.
> + * Also update the register table if successful
> + */
> +static inline void tvp7002_write_err(struct v4l2_subdev *sd, u8 reg,
> + u8 val, int *err)
> +{
> + if (!*err)
> + *err = tvp7002_write(sd, reg, val);
> +}
> +
> +/*
> + * tvp7002_g_chip_ident() - Get chip identification number
> + * @sd: ptr to v4l2_subdev struct
> + * @chip: ptr to v4l2_dbg_chip_ident struct
> + *
> + * Obtains the chip's identification number.
> + * Returns zero or -EINVAL if read operation fails.
> + */
> +static int tvp7002_g_chip_ident(struct v4l2_subdev *sd,
> + struct v4l2_dbg_chip_ident *chip)
> +{
> + u8 rev;
> + int error;
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> +
> + error = tvp7002_read(sd, TVP7002_CHIP_REV, &rev);
> +
> + if (error < 0)
> + return error;
> +
> + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP7002, rev);
> +}
> +
> +/*
> + * tvp7002_write_inittab() - Write initialization values
> + * @sd: ptr to v4l2_subdev struct
> + * @regs: ptr to i2c_reg_value struct
> + *
> + * Write initialization values.
> + * Returns zero or -EINVAL if read operation fails.
> + */
> +static int tvp7002_write_inittab(struct v4l2_subdev *sd,
> + const struct i2c_reg_value *regs)
> +{
> + int error = 0;
> +
> + /* Initialize the first (defined) registers */
> + while (TVP7002_EOR != regs->reg) {
> + if (TVP7002_WRITE == regs->type)
> + tvp7002_write_err(sd, regs->reg, regs->value, &error);
> + regs++;
> + }
> +
> + return error;
> +}
> +
> +/*
> + * tvp7002_s_dv_preset() - Set digital video preset
> + * @sd: ptr to v4l2_subdev struct
> + * @std: ptr to v4l2_dv_preset struct
> + *
> + * Set the digital video preset for a TVP7002 decoder device.
> + * Returns zero when successful or -EINVAL if register access fails.
> + */
> +static int tvp7002_s_dv_preset(struct v4l2_subdev *sd,
> + struct v4l2_dv_preset *dv_preset)
> +{
> + const struct v4l2_dv_enum_preset *preset;
> + struct tvp7002 *device = to_tvp7002(sd);
> + int i;
> +
> + for (i = 0; i < NUM_PRESETS; i++) {
> + preset = &tvp7002_presets[i].p_data;
> + if (preset->preset == dv_preset->preset) {
> + device->current_preset = &tvp7002_presets[i];
> + return tvp7002_write_inittab(sd, tvp7002_presets[i].p_settings);
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +/*
> + * tvp7002_g_ctrl() - Get a control
> + * @sd: ptr to v4l2_subdev struct
> + * @ctrl: ptr to v4l2_control struct
> + *
> + * Get a control for a TVP7002 decoder device.
> + * Returns zero when successful or -EINVAL if register access fails.
> + */
> +static int tvp7002_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
> +{
> + struct tvp7002 *device = to_tvp7002(sd);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_GAIN:
> + ctrl->value = device->gain;
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +/*
> + * tvp7002_s_ctrl() - Set a control
> + * @sd: ptr to v4l2_subdev struct
> + * @ctrl: ptr to v4l2_control struct
> + *
> + * Set a control in TVP7002 decoder device.
> + * Returns zero when successful or -EINVAL if register access fails.
> + */
> +static int tvp7002_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
> +{
> + struct tvp7002 *device = to_tvp7002(sd);
> + int error = 0;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_GAIN:
> + tvp7002_write_err(sd, TVP7002_R_FINE_GAIN,
> + ctrl->value & 0xff, &error);
> + tvp7002_write_err(sd, TVP7002_G_FINE_GAIN,
> + ctrl->value & 0xff, &error);
> + tvp7002_write_err(sd, TVP7002_B_FINE_GAIN,
> + ctrl->value & 0xff, &error);
> +
> + if (error < 0)
> + return -EINVAL;
Please return 'error' here to propagate the actual error.
> +
> + /* Set only after knowing there is no error */
> + device->gain = ctrl->value & 0xff;
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +/*
> + * tvp7002_queryctrl() - Query a control
> + * @sd: ptr to v4l2_subdev struct
> + * @ctrl: ptr to v4l2_queryctrl struct
> + *
> + * Query a control of a TVP7002 decoder device.
> + * Returns zero when successful or -EINVAL if register read fails.
> + */
> +static int tvp7002_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
> +{
> + switch (qc->id) {
> + case V4L2_CID_GAIN:
> + /*
> + * Gain is supported [0-255, default=0, step=1]
> + */
> + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 0);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +/*
> + * tvp7002_try_fmt_cap() - V4L2 decoder interface handler for try_fmt
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
> + *
> + * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
> + * ioctl is used to negotiate the image capture size and pixel format
> + * without actually making it take effect.
> + */
> +static int tvp7002_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
> +{
> + const struct tvp7002_preset_definition *preset;
> + struct tvp7002 *device = to_tvp7002(sd);
> + struct v4l2_pix_format *pix;
> +
> + pix = &f->fmt.pix;
> +
> + /* Calculate height and width based on current standard */
> + preset = device->current_preset;
> +
> + pix->width = preset->p_data.width;
> + pix->height = preset->p_data.height;
> + pix->pixelformat = V4L2_PIX_FMT_UYVY;
> + pix->field = preset->scanmode;
> + pix->bytesperline = pix->width * 2;
> + pix->sizeimage = pix->bytesperline * pix->height;
> + pix->colorspace = preset->color_space;
> + pix->priv = 0;
> +
> + v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d"
> + "Width - %d, Height - %d", "8-bit UYVY 4:2:2 Format",
> + pix->bytesperline, pix->width, pix->height);
> + return 0;
> +}
> +
> +/*
> + * tvp7002_s_fmt() - V4L2 decoder interface handler for s_fmt
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
> + *
> + * If the requested format is supported, configures the HW to use that
> + * format, returns error code if format not supported or HW can't be
> + * correctly configured.
> + */
> +static int tvp7002_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
> +{
> + struct tvp7002 *decoder = to_tvp7002(sd);
> + struct v4l2_pix_format *pix;
> + int rval;
> +
> + pix = &f->fmt.pix;
> + rval = tvp7002_try_fmt_cap(sd, f);
> + if (rval)
Shouldn't this be 'if (!rval)'?
> + decoder->pix = *pix;
And why use the 'pix' temporary variable? You can just use f->fmt.pix here.
> + return rval;
> +}
> +
> +/*
> + * tvp7002_g_fmt() - V4L2 decoder interface handler for tvp7002_g_fmt
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @f: pointer to standard V4L2 v4l2_format structure
> + *
> + * Returns the decoder's current pixel format in the v4l2_format
> + * parameter.
> + */
> +static int tvp7002_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
> +{
> + struct tvp7002 *decoder = to_tvp7002(sd);
> +
> + f->fmt.pix = decoder->pix;
> +
> + v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d"
> + "Width - %d, Height - %d",
> + decoder->pix.bytesperline,
> + decoder->pix.width, decoder->pix.height);
> + return 0;
> +}
> +
> +/*
> + * tvp7002_query_dv_preset() - query DV preset
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @std_id: standard V4L2 v4l2_dv_preset
> + *
> + * Returns the current DV preset by TVP7002. If no active input is
> + * detected, returns -EINVAL
> + */
> +static int tvp7002_query_dv_preset(struct v4l2_subdev *sd,
> + struct v4l2_dv_preset *qpreset)
> +{
> + const struct tvp7002_preset_definition *presets = tvp7002_presets;
> + struct tvp7002 *device;
> + u8 progressive;
> + u32 lpfr;
> + u32 cpln;
> + int error = 0;
> + u8 lpf_lsb;
> + u8 lpf_msb;
> + u8 cpl_lsb;
> + u8 cpl_msb;
> + int index;
> +
> + device = to_tvp7002(sd);
> +
> + /* Read standards from device registers */
> + tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_LSBS, &lpf_lsb, &error);
> + tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_MSBS, &lpf_msb, &error);
> +
> + if (error < 0)
> + return -EINVAL;
Return 'error' directly instead of replacing it with -EINVAL.
> +
> + tvp7002_read_err(sd, TVP7002_CLK_L_STAT_LSBS, &cpl_lsb, &error);
> + tvp7002_read_err(sd, TVP7002_CLK_L_STAT_MSBS, &cpl_msb, &error);
> +
> + if (error < 0)
> + return -EINVAL;
Ditto.
> +
> + /* Get lines per frame, clocks per line and interlaced/progresive */
> + lpfr = lpf_lsb | ((TVP7002_CL_MASK & lpf_msb) << TVP7002_CL_SHIFT);
> + cpln = cpl_lsb | ((TVP7002_CL_MASK & cpl_msb) << TVP7002_CL_SHIFT);
> + progressive = (lpf_msb & TVP7002_INPR_MASK) >> TVP7002_IP_SHIFT;
> +
> + /* Do checking of video modes */
> + for (index = 0; index < NUM_PRESETS; index++, presets++)
> + if (lpfr == presets->lines_per_frame &&
> + progressive == presets->progressive) {
> + if (presets->cpl_min == 0xffff)
> + break;
> + if (cpln >= presets->cpl_min && cpln <= presets->cpl_max)
> + break;
> + }
> +
> + if (index == NUM_PRESETS) {
> + v4l2_err(sd, "querystd error, lpf = %x, cpl = %x\n",
> + lpfr, cpln);
> + return -EINVAL;
> + }
> +
> + /* Set values in found preset */
> + qpreset->preset = presets->p_data.preset;
> +
> + /* Update lines per frame and clocks per line info */
> + v4l2_dbg(1, debug, sd, "Current preset: %d %d",
> + presets->p_data.width, presets->p_data.height);
> + return 0;
> +}
> +
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +/*
> + * tvp7002_g_register() - Get the value of a register
> + * @sd: ptr to v4l2_subdev struct
> + * @vreg: ptr to v4l2_dbg_register struct
> + *
> + * Get the value of a TVP7002 decoder device register.
> + * Returns zero when successful, -EINVAL if register read fails or
> + * access to I2C client fails, -EPERM if the call is not allowed
> + * by diabled CAP_SYS_ADMIN.
> + */
> +static int tvp7002_g_register(struct v4l2_subdev *sd,
> + struct v4l2_dbg_register *reg)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> +
> + if (!v4l2_chip_match_i2c_client(client, ®->match))
> + return -EINVAL;
> + if (!capable(CAP_SYS_ADMIN))
> + return -EPERM;
> +
> + return reg->val < 0 ? -EINVAL : 0;
> +}
> +
> +/*
> + * tvp7002_s_register() - set a control
> + * @sd: ptr to v4l2_subdev struct
> + * @ctrl: ptr to v4l2_control struct
> + *
> + * Get the value of a TVP7002 decoder device register.
> + * Returns zero when successful or -EINVAL if register read fails.
> + */
> +static int tvp7002_s_register(struct v4l2_subdev *sd,
> + struct v4l2_dbg_register *reg)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct tvp7002 *device = to_tvp7002(sd);
> + int wres;
> +
> + if (!v4l2_chip_match_i2c_client(client, ®->match))
> + return -EINVAL;
> + if (!capable(CAP_SYS_ADMIN))
> + return -EPERM;
> +
> + wres = tvp7002_write(sd, reg->reg & 0xff, reg->val & 0xff);
> +
> + /* Update the register value in device's table */
> + if (!wres)
> + device->registers[reg->reg].value = reg->val;
> +
> + return wres < 0 ? -EINVAL : 0;
> +}
> +#endif
> +
> +/*
> + * tvp7002_enum_fmt() - Enum supported formats
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @enable: pointer to format struct
> + *
> + * Enumerate supported formats.
> + */
> +
> +static int tvp7002_enum_fmt(struct v4l2_subdev *sd,
> + struct v4l2_fmtdesc *fmtdesc)
> +{
> + /* Check requested format index is within range */
> + if (fmtdesc->index < 0 || fmtdesc->index >= NUM_FORMATS)
> + return -EINVAL;
> + *fmtdesc = tvp7002_fmt_list[fmtdesc->index];
> +
> + return 0;
> +}
> +
> +/*
> + * tvp7002_s_stream() - V4L2 decoder i/f handler for s_stream
> + * @sd: pointer to standard V4L2 sub-device structure
> + * @enable: streaming enable or disable
> + *
> + * Sets streaming to enable or disable, if possible.
> + */
> +static int tvp7002_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct tvp7002 *device = to_tvp7002(sd);
> + int error = 0;
> +
> + if (device->streaming == enable)
> + return 0;
> +
> + if (enable) {
> + /* Set output state on (low impedance means stream on) */
> + error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x00);
> + device->streaming = enable;
> + } else {
> + /* Set output state off (high impedance means stream off) */
> + error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x03);
> + if (error) {
> + v4l2_dbg(1, debug, sd, "Unable to stop streaming\n");
> + error = -EINVAL;
Why replace the error code with -EINVAL?
> + }
> +
> + device->streaming = enable;
> + }
> +
> + return error;
> +}
> +
> +/*
> + * tvp7002_log_status() - Print information about register settings
> + * @sd: ptr to v4l2_subdev struct
> + *
> + * Log register values of a TVP7002 decoder device.
> + * Returns zero or -EINVAL if read operation fails.
> + */
> +static int tvp7002_log_status(struct v4l2_subdev *sd)
> +{
> + const struct tvp7002_preset_definition *presets = tvp7002_presets;
> + struct tvp7002 *device = to_tvp7002(sd);
> + struct v4l2_dv_preset detected;
> + int i;
> +
> + /* Find my current standard*/
> + tvp7002_query_dv_preset(sd, &detected);
You probably want to either check the result code of tvp7002_query_dv_preset
or initialize detected.preset to some invalid value (I think there is a
V4L2_DV_INVALID that might work well).
Since if tvp7002_query_dv_preset returns an error, the detected.preset field
is currently undefined.
> +
> + /* Print standard related code values */
> + for (i = 0; i < NUM_PRESETS; i++, presets++)
> + if (presets->p_data.preset == detected.preset)
> + break;
> +
> + v4l2_info(sd, "Selected DV Preset: %s\n",
> + device->current_preset->p_data.name);
> + v4l2_info(sd, " Pixels per line: %u\n",
> + device->current_preset->p_data.width);
> + v4l2_info(sd, " Lines per frame: %u\n\n",
> + device->current_preset->p_data.height);
> + if (i == NUM_PRESETS) {
> + v4l2_info(sd, "Detected DV Preset: None\n");
> + } else {
> + v4l2_info(sd, "Detected DV Preset: %s\n", presets->p_data.name);
> + v4l2_info(sd, " Pixels per line: %u\n", presets->p_data.width);
> + v4l2_info(sd, " Lines per frame: %u\n\n", presets->p_data.height);
> + }
> + v4l2_info(sd, "Streaming enabled: %s\n",
> + device->streaming ? "yes" : "no");
> +
> + /* Print the current value of the gain control */
> + v4l2_info(sd, "Gain: %u\n", device->gain);
> +
> + return 0;
> +}
> +
> +/* V4L2 core operation handlers */
> +static const struct v4l2_subdev_core_ops tvp7002_core_ops = {
> + .g_chip_ident = tvp7002_g_chip_ident,
> + .log_status = tvp7002_log_status,
> + .g_ctrl = tvp7002_g_ctrl,
> + .s_ctrl = tvp7002_s_ctrl,
> + .queryctrl = tvp7002_queryctrl,
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> + .g_register = tvp7002_g_register,
> + .s_register = tvp7002_s_register,
> +#endif
> +};
> +
> +/* Specific video subsystem operation handlers */
> +static const struct v4l2_subdev_video_ops tvp7002_video_ops = {
> + .s_dv_preset = tvp7002_s_dv_preset,
> + .query_dv_preset = tvp7002_query_dv_preset,
> + .s_stream = tvp7002_s_stream,
> + .g_fmt = tvp7002_g_fmt,
> + .s_fmt = tvp7002_s_fmt,
> + .enum_fmt = tvp7002_enum_fmt,
> +};
> +
> +/* V4L2 top level operation handlers */
> +static const struct v4l2_subdev_ops tvp7002_ops = {
> + .core = &tvp7002_core_ops,
> + .video = &tvp7002_video_ops,
> +};
> +
> +static struct tvp7002 tvp7002_dev = {
> + .streaming = 0,
> +
> + .pix = {
> + .width = 1280,
> + .height = 720,
> + .pixelformat = V4L2_PIX_FMT_UYVY,
> + .field = V4L2_FIELD_NONE,
> + .bytesperline = 1280 * 2,
> + .sizeimage = 1280 * 2 * 720,
> + .colorspace = V4L2_COLORSPACE_REC709,
> + },
> +
> + .current_preset = tvp7002_presets,
> + .gain = 0,
> +};
> +
> +/*
> + * tvp7002_probe - Probe a TVP7002 device
> + * @sd: ptr to v4l2_subdev struct
> + * @ctrl: ptr to i2c_device_id struct
> + *
> + * Initialize the TVP7002 device
> + * Returns zero when successful or -EINVAL if register read fails.
> + */
> +static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
> +{
> + struct v4l2_subdev *sd;
> + struct tvp7002 *device;
> + struct v4l2_dv_preset preset;
> + u32 current_preset;
> + int polarity_a;
> + int polarity_b;
> + u8 revision;
> +
> + int error;
> +
> + /* Check if the adapter supports the needed features */
> + if (!i2c_check_functionality(c->adapter,
> + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
> + return -EIO;
> +
> + if (!c->dev.platform_data) {
> + v4l2_err(c, "No platform data!!\n");
> + return -ENODEV;
> + }
> +
> + device = kmalloc(sizeof(struct tvp7002), GFP_KERNEL);
> +
> + if (!device)
> + return -ENOMEM;
> +
> + *device = tvp7002_dev;
> + sd = &device->sd;
> + device->pdata = c->dev.platform_data;
> +
> + /* Tell v4l2 the device is ready */
> + v4l2_i2c_subdev_init(sd, c, &tvp7002_ops);
> + v4l_info(c, "tvp7002 found @ 0x%02x (%s)\n",
> + c->addr, c->adapter->name);
> +
> + error = tvp7002_read(sd, TVP7002_CHIP_REV, &revision);
> + if (error < 0)
> + goto found_error;
> +
> + /* Get revision number */
> + v4l2_info(sd, "Rev. %02x detected.\n", revision);
> + if (revision != 0x02)
> + v4l2_info(sd, "Unknown revision detected.\n");
> +
> + /* Initializes TVP7002 to its default values */
> + error = tvp7002_write_inittab(sd, tvp7002_init_default);
> +
> + if (error < 0)
> + goto found_error;
> +
> + /* Set polarity information after registers have been set */
> + polarity_a = 0x20 | device->pdata->hs_polarity << 5
> + | device->pdata->vs_polarity << 2;
> + error = tvp7002_write(sd, TVP7002_SYNC_CTL_1, polarity_a);
> + if (error < 0)
> + goto found_error;
> +
> + polarity_b = 0x01 | device->pdata->fid_polarity << 2
> + | device->pdata->sog_polarity << 1
> + | device->pdata->clk_polarity;
> + error = tvp7002_write(sd, TVP7002_MISC_CTL_3, polarity_b);
> + if (error < 0)
> + goto found_error;
> +
> + /* Set registers according to default video mode */
> + current_preset = device->current_preset->p_data.index;
> + preset.preset = tvp7002_presets[current_preset].p_data.preset;
> + error = tvp7002_s_dv_preset(sd, &preset);
> +
> + if (error < 0) {
> + kfree(device);
> + return error;
> + }
> +
> +found_error:
> + return error;
> +}
> +
> +/*
> + * tvp7002_remove - Remove TVP7002 device support
> + * @c: ptr to i2c_client struct
> + *
> + * Reset the TVP7002 device
> + * Returns zero.
> + */
> +static int tvp7002_remove(struct i2c_client *c)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(c);
> + struct tvp7002 *device = to_tvp7002(sd);
> +
> + v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter"
> + "on address 0x%x\n", c->addr);
> +
> + v4l2_device_unregister_subdev(sd);
> + kfree(device);
> + return 0;
> +}
> +
> +/* I2C Device ID table */
> +static const struct i2c_device_id tvp7002_id[] = {
> + { "tvp7002", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, tvp7002_id);
> +
> +/* I2C driver data */
> +static struct i2c_driver tvp7002_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = TVP7002_MODULE_NAME,
> + },
> + .probe = tvp7002_probe,
> + .remove = tvp7002_remove,
> + .id_table = tvp7002_id,
> +};
> +
> +/*
> + * tvp7002_init - Initialize driver via I2C interface
> + *
> + * Register the TVP7002 driver.
> + * Returns 0 on success or < 0 on failure.
> + */
> +static int __init tvp7002_init(void)
> +{
> + return i2c_add_driver(&tvp7002_driver);
> +}
> +
> +/*
> + * tvp7002_exit - Remove driver via I2C interface
> + *
> + * Unregister the TVP7002 driver.
> + * Returns 0 on success or < 0 on failure.
> + */
> +static void __exit tvp7002_exit(void)
> +{
> + i2c_del_driver(&tvp7002_driver);
> +}
> +
> +module_init(tvp7002_init);
> +module_exit(tvp7002_exit);
>
--
Hans Verkuil - video4linux developer - sponsored by TANDBERG
^ permalink raw reply [flat|nested] 10+ messages in thread* USB MAssage Storage drivers
2009-12-15 20:49 ` Hans Verkuil
@ 2009-12-15 23:46 ` Gopala Gottumukkala
2009-12-16 7:21 ` Philby John
0 siblings, 1 reply; 10+ messages in thread
From: Gopala Gottumukkala @ 2009-12-15 23:46 UTC (permalink / raw)
To: davinci-linux-open-source, linux-media
My target is not recognizing the USB massage storage. I am working the
2.6.32 Davinci kernel
Any suggestion and ideas.
- gg
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: USB MAssage Storage drivers
2009-12-15 23:46 ` USB MAssage Storage drivers Gopala Gottumukkala
@ 2009-12-16 7:21 ` Philby John
2009-12-16 15:53 ` Gopala Gottumukkala
0 siblings, 1 reply; 10+ messages in thread
From: Philby John @ 2009-12-16 7:21 UTC (permalink / raw)
To: Gopala Gottumukkala; +Cc: davinci-linux-open-source, linux-media
On Tue, 2009-12-15 at 18:46 -0500, Gopala Gottumukkala wrote:
> My target is not recognizing the USB massage storage. I am working the
> 2.6.32 Davinci kernel
>
> Any suggestion and ideas.
ahah, this information isn't enough. Your Vendor/Product ID for this
device is compared in a lookup a table. If no match is found, your
device probably won't be detected as mass storage. You could check in
the unusual_devs.h to see if your device is included there, if your
device is relatively new you could submit a Vendor/Product ID to the USB
dev list for inclusion.
Regards,
Philby
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: USB MAssage Storage drivers
2009-12-16 7:21 ` Philby John
@ 2009-12-16 15:53 ` Gopala Gottumukkala
2009-12-16 16:03 ` Michael Trimarchi
` (3 more replies)
0 siblings, 4 replies; 10+ messages in thread
From: Gopala Gottumukkala @ 2009-12-16 15:53 UTC (permalink / raw)
To: Philby John; +Cc: davinci-linux-open-source, linux-media
(gcc version 3.4.3 (MontaVista 3.4.3-25.0.104.0600975 2006-07-06)) #4
PREEMPT Tue Dec 15 18:10:24 EST 2009
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: DaVinci DM644x EVM
Memory policy: ECC disabled, Data cache writeback
DaVinci dm6446 variant 0x0
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
50800
I have compile the kernel 2.6.32 and boot up the target. But when I
plug in the mass storage like external HDD or Pendrive it is not
recognizing.
Any help appreciated.
- GG
-----Original Message-----
From: Philby John [mailto:pjohn@in.mvista.com]
Sent: Wednesday, December 16, 2009 2:22 AM
To: Gopala Gottumukkala
Cc: davinci-linux-open-source@linux.davincidsp.com;
linux-media@vger.kernel.org
Subject: Re: USB MAssage Storage drivers
On Tue, 2009-12-15 at 18:46 -0500, Gopala Gottumukkala wrote:
> My target is not recognizing the USB massage storage. I am working the
> 2.6.32 Davinci kernel
>
> Any suggestion and ideas.
ahah, this information isn't enough. Your Vendor/Product ID for this
device is compared in a lookup a table. If no match is found, your
device probably won't be detected as mass storage. You could check in
the unusual_devs.h to see if your device is included there, if your
device is relatively new you could submit a Vendor/Product ID to the USB
dev list for inclusion.
Regards,
Philby
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: USB MAssage Storage drivers
2009-12-16 15:53 ` Gopala Gottumukkala
@ 2009-12-16 16:03 ` Michael Trimarchi
2009-12-16 16:17 ` Gopala Gottumukkala
2009-12-16 16:15 ` Subbrathnam, Swaminathan
` (2 subsequent siblings)
3 siblings, 1 reply; 10+ messages in thread
From: Michael Trimarchi @ 2009-12-16 16:03 UTC (permalink / raw)
To: Gopala Gottumukkala; +Cc: Philby John, davinci-linux-open-source, linux-media
Hi,
Gopala Gottumukkala wrote:
> (gcc version 3.4.3 (MontaVista 3.4.3-25.0.104.0600975 2006-07-06)) #4
> PREEMPT Tue Dec 15 18:10:24 EST 2009
> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
> CPU: VIVT data cache, VIVT instruction cache
> Machine: DaVinci DM644x EVM
> Memory policy: ECC disabled, Data cache writeback
> DaVinci dm6446 variant 0x0
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 50800
>
> I have compile the kernel 2.6.32 and boot up the target. But when I
> plug in the mass storage like external HDD or Pendrive it is not
> recognizing.
Do you compile the usb support? Do you have in your config?
Michael
>
> Any help appreciated.
>
> - GG
>
> -----Original Message-----
> From: Philby John [mailto:pjohn@in.mvista.com]
> Sent: Wednesday, December 16, 2009 2:22 AM
> To: Gopala Gottumukkala
> Cc: davinci-linux-open-source@linux.davincidsp.com;
> linux-media@vger.kernel.org
> Subject: Re: USB MAssage Storage drivers
>
> On Tue, 2009-12-15 at 18:46 -0500, Gopala Gottumukkala wrote:
>> My target is not recognizing the USB massage storage. I am working the
>> 2.6.32 Davinci kernel
>>
>> Any suggestion and ideas.
>
> ahah, this information isn't enough. Your Vendor/Product ID for this
> device is compared in a lookup a table. If no match is found, your
> device probably won't be detected as mass storage. You could check in
> the unusual_devs.h to see if your device is included there, if your
> device is relatively new you could submit a Vendor/Product ID to the USB
> dev list for inclusion.
>
>
> Regards,
> Philby
>
>
>
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 10+ messages in thread* RE: USB MAssage Storage drivers
2009-12-16 16:03 ` Michael Trimarchi
@ 2009-12-16 16:17 ` Gopala Gottumukkala
0 siblings, 0 replies; 10+ messages in thread
From: Gopala Gottumukkala @ 2009-12-16 16:17 UTC (permalink / raw)
To: Michael Trimarchi; +Cc: davinci-linux-open-source, linux-media
[-- Attachment #1: Type: text/plain, Size: 2244 bytes --]
Here is the config I have attached
-----Original Message-----
From: Michael Trimarchi [mailto:michael@panicking.kicks-ass.org]
Sent: Wednesday, December 16, 2009 11:04 AM
To: Gopala Gottumukkala
Cc: Philby John; davinci-linux-open-source@linux.davincidsp.com;
linux-media@vger.kernel.org
Subject: Re: USB MAssage Storage drivers
Hi,
Gopala Gottumukkala wrote:
> (gcc version 3.4.3 (MontaVista 3.4.3-25.0.104.0600975 2006-07-06)) #4
> PREEMPT Tue Dec 15 18:10:24 EST 2009
> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
> CPU: VIVT data cache, VIVT instruction cache
> Machine: DaVinci DM644x EVM
> Memory policy: ECC disabled, Data cache writeback
> DaVinci dm6446 variant 0x0
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 50800
>
> I have compile the kernel 2.6.32 and boot up the target. But when I
> plug in the mass storage like external HDD or Pendrive it is not
> recognizing.
Do you compile the usb support? Do you have in your config?
Michael
>
> Any help appreciated.
>
> - GG
>
> -----Original Message-----
> From: Philby John [mailto:pjohn@in.mvista.com]
> Sent: Wednesday, December 16, 2009 2:22 AM
> To: Gopala Gottumukkala
> Cc: davinci-linux-open-source@linux.davincidsp.com;
> linux-media@vger.kernel.org
> Subject: Re: USB MAssage Storage drivers
>
> On Tue, 2009-12-15 at 18:46 -0500, Gopala Gottumukkala wrote:
>> My target is not recognizing the USB massage storage. I am working
the
>> 2.6.32 Davinci kernel
>>
>> Any suggestion and ideas.
>
> ahah, this information isn't enough. Your Vendor/Product ID for this
> device is compared in a lookup a table. If no match is found, your
> device probably won't be detected as mass storage. You could check in
> the unusual_devs.h to see if your device is included there, if your
> device is relatively new you could submit a Vendor/Product ID to the
USB
> dev list for inclusion.
>
>
> Regards,
> Philby
>
>
>
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media"
in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
[-- Attachment #2: config.config --]
[-- Type: application/octet-stream, Size: 46789 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32
# Tue Dec 15 18:02:42 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_FREEZER is not set
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
CONFIG_ARCH_DAVINCI=y
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
CONFIG_AINTC=y
CONFIG_ARCH_DAVINCI_DMx=y
#
# TI DaVinci Implementations
#
#
# DaVinci Core Type
#
CONFIG_ARCH_DAVINCI_DM644x=y
CONFIG_ARCH_DAVINCI_DM355=y
CONFIG_ARCH_DAVINCI_DM646x=y
# CONFIG_ARCH_DAVINCI_DA830 is not set
# CONFIG_ARCH_DAVINCI_DA850 is not set
CONFIG_ARCH_DAVINCI_DM365=y
#
# DaVinci Board Type
#
CONFIG_MACH_DAVINCI_EVM=y
CONFIG_MACH_SFFSDR=y
CONFIG_MACH_DAVINCI_DM355_EVM=y
CONFIG_MACH_DM355_LEOPARD=y
CONFIG_MACH_DAVINCI_DM6467_EVM=y
CONFIG_MACH_DAVINCI_DM365_EVM=y
CONFIG_DAVINCI_MUX=y
CONFIG_DAVINCI_MUX_DEBUG=y
CONFIG_DAVINCI_MUX_WARNINGS=y
CONFIG_DAVINCI_RESET_CLOCKS=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
# CONFIG_LEDS_CPU is not set
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_DAVINCI=m
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
CONFIG_BLK_DEV_PALMCHIP_BK3710=m
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=4
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DAVINCI=y
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DAVINCI_WATCHDOG=m
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
CONFIG_MFD_DM355EVM_MSP=y
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
CONFIG_SND_DAVINCI_SOC_I2S=m
CONFIG_SND_DAVINCI_SOC_MCASP=m
CONFIG_SND_DAVINCI_SOC_EVM=m
CONFIG_SND_DM6467_SOC_EVM=m
# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_TLV320AIC3X=m
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HWA_HCD=m
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
# DaVinci 35x and 644x USB support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_MUSB_DEBUG is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_R8A66597=y
CONFIG_USB_R8A66597=m
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=m
CONFIG_UWB_HWA=m
# CONFIG_UWB_WLP is not set
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_DM355EVM is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: USB MAssage Storage drivers
2009-12-16 15:53 ` Gopala Gottumukkala
2009-12-16 16:03 ` Michael Trimarchi
@ 2009-12-16 16:15 ` Subbrathnam, Swaminathan
2009-12-16 16:20 ` Philby John
2009-12-16 16:20 ` Sergei Shtylyov
3 siblings, 0 replies; 10+ messages in thread
From: Subbrathnam, Swaminathan @ 2009-12-16 16:15 UTC (permalink / raw)
To: Gopala Gottumukkala, Philby John
Cc: davinci-linux-open-source@linux.davincidsp.com,
linux-media@vger.kernel.org
Gopala,
You would need to use the patch I circulated earlier that updates the correct DRVVBUS GPIO for DaVinci.
Pl. search it in the archives or else I will mail it tomorrow.
regards
swami
________________________________________
From: davinci-linux-open-source-bounces+swami.iyer=ti.com@linux.davincidsp.com [davinci-linux-open-source-bounces+swami.iyer=ti.com@linux.davincidsp.com] On Behalf Of Gopala Gottumukkala [ggottumu@Cernium.com]
Sent: Wednesday, December 16, 2009 9:23 PM
To: Philby John
Cc: davinci-linux-open-source@linux.davincidsp.com; linux-media@vger.kernel.org
Subject: RE: USB MAssage Storage drivers
(gcc version 3.4.3 (MontaVista 3.4.3-25.0.104.0600975 2006-07-06)) #4
PREEMPT Tue Dec 15 18:10:24 EST 2009
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: DaVinci DM644x EVM
Memory policy: ECC disabled, Data cache writeback
DaVinci dm6446 variant 0x0
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
50800
I have compile the kernel 2.6.32 and boot up the target. But when I
plug in the mass storage like external HDD or Pendrive it is not
recognizing.
Any help appreciated.
- GG
-----Original Message-----
From: Philby John [mailto:pjohn@in.mvista.com]
Sent: Wednesday, December 16, 2009 2:22 AM
To: Gopala Gottumukkala
Cc: davinci-linux-open-source@linux.davincidsp.com;
linux-media@vger.kernel.org
Subject: Re: USB MAssage Storage drivers
On Tue, 2009-12-15 at 18:46 -0500, Gopala Gottumukkala wrote:
> My target is not recognizing the USB massage storage. I am working the
> 2.6.32 Davinci kernel
>
> Any suggestion and ideas.
ahah, this information isn't enough. Your Vendor/Product ID for this
device is compared in a lookup a table. If no match is found, your
device probably won't be detected as mass storage. You could check in
the unusual_devs.h to see if your device is included there, if your
device is relatively new you could submit a Vendor/Product ID to the USB
dev list for inclusion.
Regards,
Philby
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: USB MAssage Storage drivers
2009-12-16 15:53 ` Gopala Gottumukkala
2009-12-16 16:03 ` Michael Trimarchi
2009-12-16 16:15 ` Subbrathnam, Swaminathan
@ 2009-12-16 16:20 ` Philby John
2009-12-16 16:20 ` Sergei Shtylyov
3 siblings, 0 replies; 10+ messages in thread
From: Philby John @ 2009-12-16 16:20 UTC (permalink / raw)
To: Gopala Gottumukkala; +Cc: davinci-linux-open-source, linux-media
On Wed, 2009-12-16 at 10:53 -0500, Gopala Gottumukkala wrote:
> (gcc version 3.4.3 (MontaVista 3.4.3-25.0.104.0600975 2006-07-06)) #4
> PREEMPT Tue Dec 15 18:10:24 EST 2009
> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
> CPU: VIVT data cache, VIVT instruction cache
> Machine: DaVinci DM644x EVM
> Memory policy: ECC disabled, Data cache writeback
> DaVinci dm6446 variant 0x0
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 50800
And what good is this above boot log? The log that would be of interest
is the one generated the moment you connect a USB Pen drive. A
cat /proc/bus/usb/devices would also give you related information on the
connected device. Please take a look.
Regards,
Philby
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: USB MAssage Storage drivers
2009-12-16 15:53 ` Gopala Gottumukkala
` (2 preceding siblings ...)
2009-12-16 16:20 ` Philby John
@ 2009-12-16 16:20 ` Sergei Shtylyov
3 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2009-12-16 16:20 UTC (permalink / raw)
To: Gopala Gottumukkala; +Cc: Philby John, davinci-linux-open-source, linux-media
Hello.
Gopala Gottumukkala wrote:
> (gcc version 3.4.3 (MontaVista 3.4.3-25.0.104.0600975 2006-07-06)) #4
> PREEMPT Tue Dec 15 18:10:24 EST 2009
> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
> CPU: VIVT data cache, VIVT instruction cache
> Machine: DaVinci DM644x EVM
> Memory policy: ECC disabled, Data cache writeback
> DaVinci dm6446 variant 0x0
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 50800
> I have compile the kernel 2.6.32 and boot up the target. But when I
> plug in the mass storage like external HDD or Pendrive it is not
> recognizing.
> Any help appreciated.
Try this patch:
http://marc.info/?l=linux-usb&m=126087668419996
WBR, Sergei
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-12-16 16:23 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-11-30 15:51 [PATCH 3/4 v11] TVP7002 driver for DM365 santiago.nunez
2009-12-15 20:49 ` Hans Verkuil
2009-12-15 23:46 ` USB MAssage Storage drivers Gopala Gottumukkala
2009-12-16 7:21 ` Philby John
2009-12-16 15:53 ` Gopala Gottumukkala
2009-12-16 16:03 ` Michael Trimarchi
2009-12-16 16:17 ` Gopala Gottumukkala
2009-12-16 16:15 ` Subbrathnam, Swaminathan
2009-12-16 16:20 ` Philby John
2009-12-16 16:20 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox