* Question about the signal of struct v4l2_tuner to set value
@ 2009-12-17 6:39 Joonyoung Shim
0 siblings, 0 replies; only message in thread
From: Joonyoung Shim @ 2009-12-17 6:39 UTC (permalink / raw)
To: linux-media
Hi, all.
I wonder about the usage of the signal variable of struct v4l2_tuner. I
have found only to use it to get the signal strength on drivers.
The si470x radio device can set the seek threshold value of
RSSI(Received Signal Strength Indicator) when the device scans the
channels, so if the current RSSI value is low than the seek threshold
value, the device decides the frequency is nonvalidate channel.
So, i need v4l2 interface to set the best seek threshold value and i
want to use the signal of struct v4l2_tuner for it. Can the signal
variable be used to set the value?
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-12-17 6:39 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-17 6:39 Question about the signal of struct v4l2_tuner to set value Joonyoung Shim
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox