Pinnacle Hybrid Pro Stick USB scan problems

Pinnacle Hybrid Pro Stick USB scan problems

[Andreas Lunderhage]

Hi,

I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When 
using the scan command, it finds the channels in the first mux in the 
mux file but it fails to tune the next ones. If I use Kaffeine to scan, 
it gives the same result but I can also see that the signal strength 
shows 99% on those muxes it fails to scan.

I thinks this is a problem with the tuning since if I watch one channel 
and switch to another (on another mux), it fails to tune. If I stop the 
viewing of the current channel first, then it will succeed tuning the next.

I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code 
built from the repository today.
I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another 
machine), but it gives the same problem.


BR

/Andreas

Output from scan:

scanning /usr/share/dvb/dvb-t/se-Stockholm_Nacka
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 490000000 0 2 9 3 1 2 0
initial transponder 642000000 0 2 9 3 1 2 0
initial transponder 754000000 0 2 9 3 1 2 0
initial transponder 706000000 0 2 9 3 1 2 0
initial transponder 746000000 0 2 9 3 1 2 0
initial transponder 730000000 0 2 9 3 1 2 0
 >>> tune to: 
490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 

Network Name 'Teracom_Mux_1'
0x0000 0x04d8: pmt_pid 0x04d8 Sveriges Television -- SVT24 (running)
0x0000 0x161c: pmt_pid 0x161c Sveriges Television -- SVT2 Sörmland 
(running)
0x0000 0x168a: pmt_pid 0x168a Sveriges Television -- SVT1 ABC (running)
0x0000 0x16da: pmt_pid 0x16da Sveriges Television -- SVT1 Sörmland 
(running)
0x0000 0x1586: pmt_pid 0x1586 Sveriges Television -- SVT2 ABC (running)
0x0000 0x0bc2: pmt_pid 0x0bc2 SR -- SR-P1 (running)
0x0000 0x0bcc: pmt_pid 0x0bcc SR -- SR-P2 Musik (running)
0x0000 0x0bd6: pmt_pid 0x0bd6 SR -- SR-P3 (running)
0x0000 0x0366: pmt_pid 0x0366 Sveriges Television -- Barn/Kunskapsk. 
(running)
0x0000 0x0500: pmt_pid 0x0500 Sveriges Television -- SVT1 Tal txt (running)
0x0000 0x050a: pmt_pid 0x050a Sveriges Television -- SVT2 Tal txt (running)
0x0000 0xfffe: pmt_pid 0x0712 Boxer TV Access AB -- Boxer Navigator 
(running, scrambled)
 >>> tune to: 
642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 

WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
 >>> tune to: 
754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 

WARNING: >>> tuning failed!!!
 >>> tune to: 
754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
 >>> tune to: 
706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 

WARNING: >>> tuning failed!!!
 >>> tune to: 
706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
 >>> tune to: 
746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 

WARNING: >>> tuning failed!!!
 >>> tune to: 
746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
 >>> tune to: 
730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 

WARNING: >>> tuning failed!!!
 >>> tune to: 
730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
dumping lists (12 services)
Done.
SVT24:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1249:1248:1240 

SVT2 
Sörmland:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1029:1028:5660 

SVT1 
ABC:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1019:1018:5770 

SVT1 
Sörmland:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1019:1018:5850 

SVT2 
ABC:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1029:1028:5510 

SR-P1:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3018:3010 

SR-P2 
Musik:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3028:3020 

SR-P3:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3038:3030 

Barn/Kunskapsk.:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:879:878:870 

SVT2 Tal 
txt:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1299:1026:1290 

SVT1 Tal 
txt:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1289:1016:1280 

Boxer 
Navigator:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:65534 


--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Re: Pinnacle Hybrid Pro Stick USB scan problems

[Devin Heitmueller]

On Mon, Dec 14, 2009 at 2:05 PM, Andreas Lunderhage <lunderhage@home.se> wrote:
> Hi,
>
> I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When
> using the scan command, it finds the channels in the first mux in the mux
> file but it fails to tune the next ones. If I use Kaffeine to scan, it gives
> the same result but I can also see that the signal strength shows 99% on
> those muxes it fails to scan.
>
> I thinks this is a problem with the tuning since if I watch one channel and
> switch to another (on another mux), it fails to tune. If I stop the viewing
> of the current channel first, then it will succeed tuning the next.
>
> I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code
> built from the repository today.
> I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine),
> but it gives the same problem.

First, make sure you are running the latest v4l-dvb code (instructions
at http://linuxtv.org/repo), and then try commenting out line 181 of
em28xx-cards.c and see if that fixes the issue.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Re: Pinnacle Hybrid Pro Stick USB scan problems

[Andreas Lunderhage]

There is a missing header file in the repo...

/home/lunderhage/v4l-dvb/v4l/radio-miropcm20.c:20:23: error: 
sound/aci.h: No such file or directory

Can someone push that file into the repo or send it to me, please?

BR
/Andreas

Devin Heitmueller wrote:
> On Mon, Dec 14, 2009 at 2:05 PM, Andreas Lunderhage <lunderhage@home.se> wrote:
>   
>> Hi,
>>
>> I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When
>> using the scan command, it finds the channels in the first mux in the mux
>> file but it fails to tune the next ones. If I use Kaffeine to scan, it gives
>> the same result but I can also see that the signal strength shows 99% on
>> those muxes it fails to scan.
>>
>> I thinks this is a problem with the tuning since if I watch one channel and
>> switch to another (on another mux), it fails to tune. If I stop the viewing
>> of the current channel first, then it will succeed tuning the next.
>>
>> I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code
>> built from the repository today.
>> I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine),
>> but it gives the same problem.
>>     
>
> First, make sure you are running the latest v4l-dvb code (instructions
> at http://linuxtv.org/repo), and then try commenting out line 181 of
> em28xx-cards.c and see if that fixes the issue.
>
> Devin
>
>   

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Re: Pinnacle Hybrid Pro Stick USB scan problems

[Douglas Schilling Landgraf]

Hi Andreas,

On 12/19/2009 06:46 AM, Andreas Lunderhage wrote:
> There is a missing header file in the repo...
>
> /home/lunderhage/v4l-dvb/v4l/radio-miropcm20.c:20:23: error: 
> sound/aci.h: No such file or directory
>
> Can someone push that file into the repo or send it to me, please?
>

Thanks for your report.

Please add into v4l/versions.txt file:
[2.6.33]
RADIO_MIROPCM20

then

make distclean
make
make rmmod
make install

Cheers
Douglas
> BR
> /Andreas
>
> Devin Heitmueller wrote:
>> On Mon, Dec 14, 2009 at 2:05 PM, Andreas Lunderhage 
>> <lunderhage@home.se> wrote:
>>> Hi,
>>>
>>> I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When
>>> using the scan command, it finds the channels in the first mux in 
>>> the mux
>>> file but it fails to tune the next ones. If I use Kaffeine to scan, 
>>> it gives
>>> the same result but I can also see that the signal strength shows 
>>> 99% on
>>> those muxes it fails to scan.
>>>
>>> I thinks this is a problem with the tuning since if I watch one 
>>> channel and
>>> switch to another (on another mux), it fails to tune. If I stop the 
>>> viewing
>>> of the current channel first, then it will succeed tuning the next.
>>>
>>> I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code
>>> built from the repository today.
>>> I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another 
>>> machine),
>>> but it gives the same problem.
>>
>> First, make sure you are running the latest v4l-dvb code (instructions
>> at http://linuxtv.org/repo), and then try commenting out line 181 of
>> em28xx-cards.c and see if that fixes the issue.
>>
>> Devin
>>
>
> -- 
> video4linux-list mailing list
> Unsubscribe 
> mailto:video4linux-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list