From: dz-tor <dz-tor@wp.pl>
To: hermann-pitton@arcor.de, terrywu2009@gmail.com, pavle.predic@yahoo.co.uk
Cc: video4linux-list@redhat.com
Subject: Re: Re: Leadtek Winfast TV2100
Date: Sun, 03 Jan 2010 16:37:48 +0100 [thread overview]
Message-ID: <4B40B9CC.1040108@wp.pl> (raw)
Hi,
I want to ask whether you are working on this 'issue'. I'm interested in
the subject, as I'm owner of this card and cannot get this stuff to work
- I've picture, no sound. Earlier you have written, that you can provide
patches for testing. If offer is still actual, I can test them.
Currently I'm using kernel 2.6.31, but if it's a problem I can switch to
2.6.32.
As I wrote earlier I have the same card - Winfast TV2100 with FM, tv
norm used in my country is PAL (I'm from Poland).
Regards,
Darek
>
>> Hey guys,
>>
>> Let me start by thanking you both for all your help. Unfortunately,
>> there isn't much I can do with the data you provided - it's way too
>> technical for me. I'd be happy to do any tests and apply any patches,
>> but I would need some instructions - but only if you have time; I
>> really don't want to burden you with this.
>>
>> Thanks again,
>>
>> Pavle.
>>
>>
>>
>> ________________________________
>> From: hermann pitton<hermann-pitton@arcor.de>
>> To: Terry Wu<terrywu2009@gmail.com>
>> Cc: pavle.predic@yahoo.co.uk; video4linux-list@redhat.com
>> Sent: Sat, 28 November, 2009 4:09:28
>> Subject: Re: Re: Leadtek Winfast TV2100
>>
>> Hi Terry Wu,
>>
>> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu:
>> > Hi,
>> >
>> > Here are the subsystem IDs for different TV2100 models:
>> > Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK)
>> > Subsystem ID:0x6f32107d, TVF5533-MF (NTSC)
>> > Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM)
>> >
>> > Terry
>>
>> better is to become active on it.
>>
>> we can most likely help about how to match such tuners fine,
>> if any doubts left, but the best is to send just patches with having
>> such hardware to test on.
>>
>> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was
>> pioneering and we have that in mind, it should be fairly easy for those.
>>
>> Let's know the other way round too, where you have still concerns doing
>> so.
>>
>> Cheers,
>> Hermann
>>
>> > 2009/11/23 hermann pitton<hermann-pitton@arcor.de>:
>> > > Hi, thanks again!
>> > >
>> > > Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu:
>> > >> Hi,
>> > >>
>> > >> Please refer to the attached JPEG file for the GPIO
>> settings of
>> > >> TV2100 with FM (PCB:B).
>> > >>
>> > >> Let me know if you need the information of TV2100 without FM
>> > >> (PCB:A, TVF8533-BDF).
>> > >>
>> > >> Terry Wu
>> > >
>> > > On a first look, if we start to count gpios from zero, we tell
>> the same.
>> > >
>> > > The TVF8533_BDF I would have to look up. It is four to five
>> years back.
>> > >
>> > > If it uses that minor number TI chip without radio support, we
>> treat it
>> > > as tuner=69 too currently.
>> > >
>> > > For all such older can tuners, widely different about the globe,
>> counts,
>> > > that we don't have any way to detect them. So first working,
>> either NTSC
>> > > or PAL, sits in the pool position and others have to think twice.
>> > >
>> > > OEMs do code tuners into eeprom content, some do not at all,
>> such doing
>> > > it are in competition and don't follow the rules of the main chip
>> > > manufacturer, Philips/NXP in that case, and go their own ways.
>> > >
>> > > So tuner tables are unstable across manufacturers.
>> > >
>> > > We often can't help that much in such cases, but implementing
>> their own
>> > > tuner eeprom detection into the linux drivers is of course still
>> > > welcome. Hauppauge does it very successfully since years.
>> > >
>> > > We can't do much about it, if OEMs don't follow Philips or whom
>> ever on
>> > > such.
>> > >
>> > > Thanks,
>> > > Hermann
>> > >
>> > >
>> > >>
>> > >> 2009/11/23 Terry Wu<terrywu2009@gmail.com>:
>> > >> > Hi,
>> > >> >
>> > >> > The TVF88T5-BDFF data sheet is attached.
>> > >> >
>> > >> > Terry Wu
>> > >> >
>> > >> > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf
>> > >> > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf
>> > >> > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf
>> > >> > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf
>> > >> > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf
>> > >> > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf
>> > >> > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf
>> > >> > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf
>> > >> > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf
>> > >> > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf
>> > >> > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf
>> > >> > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf
>> > >> > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf
>> > >> > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf
>> > >> > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf
>> > >> > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf
>> > >> >
>> > >
>> > >
>> > >
>>
>>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2010-01-03 15:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-03 15:37 dz-tor [this message]
2010-01-08 19:34 ` Re: Leadtek Winfast TV2100 hermann pitton
2010-01-08 20:24 ` Blackmagic SDI card --> v4l2 ready ? Mars Forest
2010-01-08 20:32 ` Mars Forest
2010-01-11 13:57 ` Rafael Diniz
2010-01-08 22:56 ` Leadtek Winfast TV2100 dz-tor
2010-01-09 14:46 ` Pavle Predic
2010-01-09 16:23 ` dz-tor
2010-01-09 17:14 ` hermann pitton
2010-01-09 22:48 ` hermann pitton
2010-01-10 21:26 ` dz-tor
-- strict thread matches above, loose matches on Subject: below --
2009-11-21 22:33 Aw: " hermann-pitton
2009-11-22 12:51 ` Terry Wu
2009-11-22 22:30 ` hermann pitton
2009-11-23 1:23 ` Terry Wu
2009-11-23 1:42 ` Terry Wu
2009-11-23 2:30 ` hermann pitton
2009-11-26 2:33 ` Terry Wu
2009-11-28 3:09 ` hermann pitton
2009-11-28 18:04 ` Pavle Predic
2009-11-23 1:47 ` hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B40B9CC.1040108@wp.pl \
--to=dz-tor@wp.pl \
--cc=hermann-pitton@arcor.de \
--cc=pavle.predic@yahoo.co.uk \
--cc=terrywu2009@gmail.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox