* [PATCH 2/2, RFC] gspca pac7302: add support for camera button
@ 2010-01-17 13:08 Németh Márton
2010-01-28 19:11 ` [PATCH] " Németh Márton
0 siblings, 1 reply; 3+ messages in thread
From: Németh Márton @ 2010-01-17 13:08 UTC (permalink / raw)
To: Jean-Francois Moine, Hans de Goede; +Cc: V4L Mailing List
From: Márton Németh <nm127@freemail.hu>
Add support for snapshot button found on Labtec Webcam 2200.
Signed-off-by: Márton Németh <nm127@freemail.hu>
---
diff -r 875c200a19dc linux/drivers/media/video/gspca/pac7302.c
--- a/linux/drivers/media/video/gspca/pac7302.c Sun Jan 17 07:58:51 2010 +0100
+++ b/linux/drivers/media/video/gspca/pac7302.c Sun Jan 17 13:47:50 2010 +0100
@@ -5,6 +5,8 @@
* V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
*
* Separated from Pixart PAC7311 library by M�rton N�meth <nm127@freemail.hu>
+ * Camera button input handling by Márton Németh <nm127@freemail.hu>
+ * Copyright (C) 2009-2010 Márton Németh <nm127@freemail.hu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -68,6 +70,7 @@
#define MODULE_NAME "pac7302"
+#include <linux/input.h>
#include <media/v4l2-chip-ident.h>
#include "gspca.h"
@@ -1164,6 +1167,37 @@
}
#endif
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrput packet length */
+{
+ int ret = -EINVAL;
+ u8 data0, data1;
+
+ if (len == 2) {
+ data0 = data[0];
+ data1 = data[1];
+ if ((data0 == 0x00 && data1 == 0x11) ||
+ (data0 == 0x22 && data1 == 0x33) ||
+ (data0 == 0x44 && data1 == 0x55) ||
+ (data0 == 0x66 && data1 == 0x77) ||
+ (data0 == 0x88 && data1 == 0x99) ||
+ (data0 == 0xaa && data1 == 0xbb) ||
+ (data0 == 0xcc && data1 == 0xdd) ||
+ (data0 == 0xee && data1 == 0xff)) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description for pac7302 */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -1180,6 +1214,9 @@
.set_register = sd_dbg_s_register,
.get_chip_ident = sd_chip_ident,
#endif
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] gspca pac7302: add support for camera button
2010-01-17 13:08 [PATCH 2/2, RFC] gspca pac7302: add support for camera button Németh Márton
@ 2010-01-28 19:11 ` Németh Márton
2010-01-28 19:44 ` Németh Márton
0 siblings, 1 reply; 3+ messages in thread
From: Németh Márton @ 2010-01-28 19:11 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: Hans de Goede, V4L Mailing List
From: Márton Németh <nm127@freemail.hu>
Add support for snapshot button found on Labtec Webcam 2200.
Signed-off-by: Márton Németh <nm127@freemail.hu>
---
diff -r 875c200a19dc linux/drivers/media/video/gspca/pac7302.c
--- a/linux/drivers/media/video/gspca/pac7302.c Sun Jan 17 07:58:51 2010 +0100
+++ b/linux/drivers/media/video/gspca/pac7302.c Sun Jan 17 13:47:50 2010 +0100
@@ -5,6 +5,8 @@
* V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
*
* Separated from Pixart PAC7311 library by M�rton N�meth <nm127@freemail.hu>
+ * Camera button input handling by Márton Németh <nm127@freemail.hu>
+ * Copyright (C) 2009-2010 Márton Németh <nm127@freemail.hu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -68,6 +70,7 @@
#define MODULE_NAME "pac7302"
+#include <linux/input.h>
#include <media/v4l2-chip-ident.h>
#include "gspca.h"
@@ -1164,6 +1167,37 @@
}
#endif
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrput packet length */
+{
+ int ret = -EINVAL;
+ u8 data0, data1;
+
+ if (len == 2) {
+ data0 = data[0];
+ data1 = data[1];
+ if ((data0 == 0x00 && data1 == 0x11) ||
+ (data0 == 0x22 && data1 == 0x33) ||
+ (data0 == 0x44 && data1 == 0x55) ||
+ (data0 == 0x66 && data1 == 0x77) ||
+ (data0 == 0x88 && data1 == 0x99) ||
+ (data0 == 0xaa && data1 == 0xbb) ||
+ (data0 == 0xcc && data1 == 0xdd) ||
+ (data0 == 0xee && data1 == 0xff)) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description for pac7302 */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -1180,6 +1214,9 @@
.set_register = sd_dbg_s_register,
.get_chip_ident = sd_chip_ident,
#endif
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] gspca pac7302: add support for camera button
2010-01-28 19:11 ` [PATCH] " Németh Márton
@ 2010-01-28 19:44 ` Németh Márton
0 siblings, 0 replies; 3+ messages in thread
From: Németh Márton @ 2010-01-28 19:44 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: Hans de Goede, V4L Mailing List
Hello Jean-Francois,
thank you for accepting this patch and for the previous suggestions which made it possible
to reach the current state of this patchset. Also thanks for correcting the character
encoding in my name.
Regards,
Márton Németh
Németh Márton írta:
> From: Márton Németh <nm127@freemail.hu>
>
> Add support for snapshot button found on Labtec Webcam 2200.
>
> Signed-off-by: Márton Németh <nm127@freemail.hu>
> ---
> diff -r 875c200a19dc linux/drivers/media/video/gspca/pac7302.c
> --- a/linux/drivers/media/video/gspca/pac7302.c Sun Jan 17 07:58:51 2010 +0100
> +++ b/linux/drivers/media/video/gspca/pac7302.c Sun Jan 17 13:47:50 2010 +0100
> @@ -5,6 +5,8 @@
> * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
> *
> * Separated from Pixart PAC7311 library by M�rton N�meth <nm127@freemail.hu>
> + * Camera button input handling by Márton Németh <nm127@freemail.hu>
> + * Copyright (C) 2009-2010 Márton Németh <nm127@freemail.hu>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> @@ -68,6 +70,7 @@
>
> #define MODULE_NAME "pac7302"
>
> +#include <linux/input.h>
> #include <media/v4l2-chip-ident.h>
> #include "gspca.h"
>
> @@ -1164,6 +1167,37 @@
> }
> #endif
>
> +#ifdef CONFIG_INPUT
> +static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
> + u8 *data, /* interrupt packet data */
> + int len) /* interrput packet length */
> +{
> + int ret = -EINVAL;
> + u8 data0, data1;
> +
> + if (len == 2) {
> + data0 = data[0];
> + data1 = data[1];
> + if ((data0 == 0x00 && data1 == 0x11) ||
> + (data0 == 0x22 && data1 == 0x33) ||
> + (data0 == 0x44 && data1 == 0x55) ||
> + (data0 == 0x66 && data1 == 0x77) ||
> + (data0 == 0x88 && data1 == 0x99) ||
> + (data0 == 0xaa && data1 == 0xbb) ||
> + (data0 == 0xcc && data1 == 0xdd) ||
> + (data0 == 0xee && data1 == 0xff)) {
> + input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
> + input_sync(gspca_dev->input_dev);
> + input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
> + input_sync(gspca_dev->input_dev);
> + ret = 0;
> + }
> + }
> +
> + return ret;
> +}
> +#endif
> +
> /* sub-driver description for pac7302 */
> static const struct sd_desc sd_desc = {
> .name = MODULE_NAME,
> @@ -1180,6 +1214,9 @@
> .set_register = sd_dbg_s_register,
> .get_chip_ident = sd_chip_ident,
> #endif
> +#ifdef CONFIG_INPUT
> + .int_pkt_scan = sd_int_pkt_scan,
> +#endif
> };
>
> /* -- module initialisation -- */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-01-28 19:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-17 13:08 [PATCH 2/2, RFC] gspca pac7302: add support for camera button Németh Márton
2010-01-28 19:11 ` [PATCH] " Németh Márton
2010-01-28 19:44 ` Németh Márton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox