From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <linux-media-owner@vger.kernel.org>
Received: from fg-out-1718.google.com ([72.14.220.154]:26305 "EHLO
	fg-out-1718.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1752638Ab0ATWPA (ORCPT
	<rfc822;linux-media@vger.kernel.org>);
	Wed, 20 Jan 2010 17:15:00 -0500
Received: by fg-out-1718.google.com with SMTP id 16so1126742fgg.1
        for <linux-media@vger.kernel.org>; Wed, 20 Jan 2010 14:14:58 -0800 (PST)
Message-ID: <4B578073.4030103@googlemail.com>
Date: Wed, 20 Jan 2010 23:15:15 +0100
From: Hans-Peter Wolf <hapewolf@googlemail.com>
MIME-Version: 1.0
To: linux-media@vger.kernel.org
Subject: Remote for Terratec Cinergy C PCI HD (DVB-C)
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-media-owner@vger.kernel.org
List-ID: <linux-media.vger.kernel.org>

Hi,

I installed the mantis driver from the v4l-dvb mercurial repository and 
got my tv-card Terratec Cinergy C PCI HD running successfully.

However, I cannot find any information if the included remote, which 
also directly connected to the PCI card, is also working. The dmesg 
output gives me these lines at the startup (not comparable to the lines 
listed on linuxtv.org):

[    7.402278] Mantis 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 16 
(level, low) -> IRQ 16
[    7.403356] DVB: registering new adapter (Mantis DVB adapter)
[    8.322027] DVB: registering adapter 0 frontend 0 (Philips TDA10023 
DVB-C)...

(I also had to add the module 'mantis' to /etc/modules to run it 
automatically at startup. Is this normal?)

I also tried cat /proc/bus/input/devices but couldn't find a plausible 
device (output attached below).

Can anyone tell me how to find out if the device is properly installed? 
Or better: How to install the remote device? Is there any special module 
required?

Thank you very much in advance!
Hans-Peter

cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=10000000000000 0

I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=mouse0 event2
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: 
Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/device:13/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=3f000b00000000 0 0 0

I: Bus=0003 Vendor=046d Product=c01f Version=0110
N: Name="Logitech USB-PS/2 Optical Mouse"
P: Phys=usb-0000:00:02.0-6/input0
S: Sysfs=/devices/pci0000:00/0000:00:02.0/usb3/3-6/3-6:1.0/input/input4
U: Uniq=
H: Handlers=mouse1 event4
B: EV=17
B: KEY=f0000 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0003 Vendor=046a Product=0011 Version=0110
N: Name="HID 046a:0011"
P: Phys=usb-0000:00:04.0-6/input0
S: Sysfs=/devices/pci0000:00/0000:00:04.0/usb4/4-6/4-6:1.0/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0001 Vendor=10ec Product=0888 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:07.0/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=40001
B: SND=6