From: LiM <lim@brdo.cz>
To: linux-media@vger.kernel.org
Subject: bt878 card: no sound and only xvideo support in 2.6.31 bttv 0.9.18
Date: Thu, 21 Jan 2010 09:05:06 +0100 [thread overview]
Message-ID: <4B580AB2.6030005@brdo.cz> (raw)
Hello,
i have the same problem as http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/11441 also with Hercules Smart TV Stereo ..
works OK audio+video on ..2.6.29-gentoo-r5 + bttv 0.9.17
but NO AUDIO on linux-2.6.31-gentoo-r6 + bttv 0.9.18
cat /etc/modprobe.d/bttv.conf
options tvaudio tda9874a=1 tda9874a_STD=0
options bttv radio=0 card=100 tuner=29 gbuffers=14 i2c_udelay=128 pll=1
autoload=1
2.6.29-gentoo-r5 + bttv 0.9.17
bttv: driver version 0.9.17 loaded
bttv: using 14 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:04:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bttv0: Bt878 (rev 17) at 0000:04:01.0, irq: 16, latency: 64, mmio:
0xf8ffe000
bttv0: using: Hercules Smart TV Stereo [card=100,insmod option]
IRQ 16/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
tvaudio' 6-0058: found tda9874a.
tvaudio' 6-0058: tda9874h/a found @ 0xb0 (bt878 #0 [sw])
tvaudio' 6-004b: pic16c54 (PV951) found @ 0x96 (bt878 #0 [sw])
bttv0: tuner type=29
bttv0: i2c: checking for TDA9875 @ 0xb0... found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
All bytes are equal. It is not a TEA5767
tuner' 6-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner-simple 6-0060: creating new instance
tuner-simple 6-0060: type set to 29 (LG PAL_BG (TPI8PSB11D))
bttv0: registered device video1
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
linux-2.6.31-gentoo-r6 + bttv 0.9.18
bttv: driver version 0.9.18 loaded
bttv: using 14 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:04:01.0, irq: 16, latency: 64, mmio:
0xf8ffe000
bttv0: using: Hercules Smart TV Stereo [card=100,insmod option]
IRQ 16/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: tuner type=29
tvaudio 0-0058: found tda9874a.
tvaudio 0-0058: tda9874h/a found @ 0xb0 (bt878 #0 [sw])
All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner-simple 0-0060: creating new instance
tuner-simple 0-0060: type set to 29 (LG PAL_BG (TPI8PSB11D))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .
bttv0: PLL: 28636363 => 35468950 .
bttv0: PLL: 28636363 => 35468950 . ok
I think problem is in new bttv driver, in modules is new options
audiodev and tvaudio is loading with bttv? and this line:
"tvaudio' 6-004b: pic16c54 (PV951) found @ 0x96 (bt878 #0 [sw])"
is only with older bttv.
modinfo -k 2.6.31-gentoo-r6 bttv
---cut--
parm: autoload:obsolete option, please do not use anymore (int)
parm: audiodev:specify audio device:
-1 = no audio
0 = autodetect (default)
1 = msp3400
2 = tda7432
3 = tvaudio (array of int)
---cut--
How can i load module with new bttv to get sound working?
rdgs
Michal Vesely
next reply other threads:[~2010-01-21 8:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-21 8:05 LiM [this message]
2010-01-21 9:49 ` bt878 card: no sound and only xvideo support in 2.6.31 bttv 0.9.18 Leopold Gouverneur
2010-01-22 8:05 ` LiM
2010-01-23 9:16 ` xof
2010-01-23 12:27 ` Alistair Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B580AB2.6030005@brdo.cz \
--to=lim@brdo.cz \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox