[PATCH 2/2] radio: Add radio-timb to the Kconfig and Makefile

[PATCH 2/2] radio: Add radio-timb to the Kconfig and Makefile

[Richard Röjfors]

This patch adds radio-timb to the Makefile and Kconfig.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
---
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 3f40f37..032ae2b 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -429,4 +429,14 @@ config RADIO_TEF6862
 	  To compile this driver as a module, choose M here: the
 	  module will be called TEF6862.

+config RADIO_TIMBERDALE
+	tristate "Enable the Timberdale radio driver"
+	depends on MFD_TIMBERDALE && HAS_IOMEM
+	select RADIO_TEF6862
+	select RADIO_SAA7706H
+	---help---
+	  This is a kind of umbrella driver for the Radio Tuner and DSP
+	  found behind the Timberdale FPGA on the Russellville board.
+	  Enable this driver will automatically select the DSP and tuner.
+
 endif # RADIO_ADAPTERS
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index 01922ad..8973850 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -24,5 +24,6 @@ obj-$(CONFIG_RADIO_SI470X) += si470x/
 obj-$(CONFIG_USB_MR800) += radio-mr800.o
 obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
 obj-$(CONFIG_RADIO_TEF6862) += tef6862.o
+obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o

 EXTRA_CFLAGS += -Isound