* saa7134 noise on composite input
@ 2010-02-07 22:57 P. van Gaans
0 siblings, 0 replies; only message in thread
From: P. van Gaans @ 2010-02-07 22:57 UTC (permalink / raw)
To: linux-media
Hi everyone,
My problem is actually quite similar and likely the same as
http://www.spinics.net/lists/linux-media/msg11186.html ("Re: kworld
studio terminator (saa7134) noise on capture").
I have an Asus My Cinema-P7131 Hybrid and am trying to use the composite
input. I run something like:
mplayer -tv driver=v4l2:norm=pal:input=1:width=720:height=576 tv://
The first time running mplayer (or mencoder) after booting the system
the picture is usually OK. The second time it is often noisy. At random
the picture is sometimes OK again if I just retry a few times. Also, if
I unplug the composite cable while mplayer is running and plug it back
in, the picture gets fixed and the noise goes away.
My noise looks similar to the noise from asko. I also made a screencap
from the menu of my DVB-box:
http://www.glowfoto.com/viewimage.php?y=2010&m=02&img=07-144928L&t=jpg&rand=8718&srv=img6
Top shows noisy image, bottom after replugging the composite cable.
TVtime doesn't seem to suffer, so TVtime might init the card differently
somehow?
I hope someone has a clue.
P. van Gaans
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-02-07 22:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-02-07 22:57 saa7134 noise on composite input P. van Gaans
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox