From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: "Richard Röjfors" <richard.rojfors@pelagicore.com>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>,
sameo@linux.intel.com
Subject: Re: [PATCH] mfd: Add timb-radio to the timberdale MFD
Date: Fri, 19 Feb 2010 09:52:21 -0200 [thread overview]
Message-ID: <4B7E7B75.3040205@redhat.com> (raw)
In-Reply-To: <4B7845F0.1070800@pelagicore.com>
Richard Röjfors wrote:
> This patch addes timb-radio to all configurations of the timberdale MFD.
>
> Connected to the FPGA is a TEF6862 tuner and a SAA7706H DSP, the I2C
> board info of these devices is passed via the timb-radio platform data.
Hi Richard,
I'm trying to apply it to my git tree (http://git.linuxtv.org/v4l-dvb.git),
but it is failing:
patching file drivers/mfd/timberdale.c
Hunk #1 FAILED at 37.
Hunk #2 FAILED at 215.
Hunk #3 FAILED at 276.
Hunk #4 FAILED at 325.
Hunk #5 FAILED at 364.
Hunk #6 FAILED at 405.
6 out of 6 hunks FAILED -- saving rejects to file drivers/mfd/timberdale.c.rej
Patch doesn't apply
Could you please verify what's going wrong?
>
> Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
> ---
> diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
> index 603cf06..1ed44d2 100644
> --- a/drivers/mfd/timberdale.c
> +++ b/drivers/mfd/timberdale.c
> @@ -37,6 +37,8 @@
> #include <linux/spi/max7301.h>
> #include <linux/spi/mc33880.h>
>
> +#include <media/timb_radio.h>
> +
> #include "timberdale.h"
>
> #define DRIVER_NAME "timberdale"
> @@ -213,6 +215,40 @@ const static __devinitconst struct resource
> timberdale_uartlite_resources[] = {
> },
> };
>
> +const static __devinitconst struct resource
> timberdale_radio_resources[] = {
> + {
> + .start = RDSOFFSET,
> + .end = RDSEND,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = IRQ_TIMBERDALE_RDS,
> + .end = IRQ_TIMBERDALE_RDS,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static __devinitdata struct i2c_board_info
> timberdale_tef6868_i2c_board_info = {
> + I2C_BOARD_INFO("tef6862", 0x60)
> +};
> +
> +static __devinitdata struct i2c_board_info
> timberdale_saa7706_i2c_board_info = {
> + I2C_BOARD_INFO("saa7706h", 0x1C)
> +};
> +
> +static __devinitdata struct timb_radio_platform_data
> + timberdale_radio_platform_data = {
> + .i2c_adapter = 0,
> + .tuner = {
> + .module_name = "tef6862",
> + .info = &timberdale_tef6868_i2c_board_info
> + },
> + .dsp = {
> + .module_name = "saa7706h",
> + .info = &timberdale_saa7706_i2c_board_info
> + }
> +};
> +
> const static __devinitconst struct resource timberdale_dma_resources[] = {
> {
> .start = DMAOFFSET,
> @@ -240,6 +276,13 @@ static __devinitdata struct mfd_cell
> timberdale_cells_bar0_cfg0[] = {
> .data_size = sizeof(timberdale_gpio_platform_data),
> },
> {
> + .name = "timb-radio",
> + .num_resources = ARRAY_SIZE(timberdale_radio_resources),
> + .resources = timberdale_radio_resources,
> + .platform_data = &timberdale_radio_platform_data,
> + .data_size = sizeof(timberdale_radio_platform_data),
> + },
> + {
> .name = "xilinx_spi",
> .num_resources = ARRAY_SIZE(timberdale_spi_resources),
> .resources = timberdale_spi_resources,
> @@ -282,6 +325,13 @@ static __devinitdata struct mfd_cell
> timberdale_cells_bar0_cfg1[] = {
> .resources = timberdale_mlogicore_resources,
> },
> {
> + .name = "timb-radio",
> + .num_resources = ARRAY_SIZE(timberdale_radio_resources),
> + .resources = timberdale_radio_resources,
> + .platform_data = &timberdale_radio_platform_data,
> + .data_size = sizeof(timberdale_radio_platform_data),
> + },
> + {
> .name = "xilinx_spi",
> .num_resources = ARRAY_SIZE(timberdale_spi_resources),
> .resources = timberdale_spi_resources,
> @@ -314,6 +364,13 @@ static __devinitdata struct mfd_cell
> timberdale_cells_bar0_cfg2[] = {
> .data_size = sizeof(timberdale_gpio_platform_data),
> },
> {
> + .name = "timb-radio",
> + .num_resources = ARRAY_SIZE(timberdale_radio_resources),
> + .resources = timberdale_radio_resources,
> + .platform_data = &timberdale_radio_platform_data,
> + .data_size = sizeof(timberdale_radio_platform_data),
> + },
> + {
> .name = "xilinx_spi",
> .num_resources = ARRAY_SIZE(timberdale_spi_resources),
> .resources = timberdale_spi_resources,
> @@ -348,6 +405,13 @@ static __devinitdata struct mfd_cell
> timberdale_cells_bar0_cfg3[] = {
> .data_size = sizeof(timberdale_gpio_platform_data),
> },
> {
> + .name = "timb-radio",
> + .num_resources = ARRAY_SIZE(timberdale_radio_resources),
> + .resources = timberdale_radio_resources,
> + .platform_data = &timberdale_radio_platform_data,
> + .data_size = sizeof(timberdale_radio_platform_data),
> + },
> + {
> .name = "xilinx_spi",
> .num_resources = ARRAY_SIZE(timberdale_spi_resources),
> .resources = timberdale_spi_resources,
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Cheers,
Mauro
next prev parent reply other threads:[~2010-02-19 11:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-14 18:50 [PATCH] mfd: Add timb-radio to the timberdale MFD Richard Röjfors
2010-02-19 11:52 ` Mauro Carvalho Chehab [this message]
2010-02-19 16:39 ` Richard Röjfors
2010-02-19 22:41 ` Richard Röjfors
2010-02-19 22:56 ` Randy Dunlap
2010-02-20 0:10 ` Richard Röjfors
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B7E7B75.3040205@redhat.com \
--to=mchehab@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=richard.rojfors@pelagicore.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox