Re: DM1105: could not attach frontend 195d:1105

[Nameer Kazzaz <nameer.kazzaz@gmail.com>]

Sounds cool, let me know if I can help you with anything.

Thanks
Nameer

Hendrik Skarpeid wrote:
> No luck here either, still working on it.
> My plan is to solder som wires on strategic points on the board and 
> debug i2c and other activity with an oscilloscope. Will probably start 
> next week.
>
> Nameer Kazzaz wrote:
>> Hey Igor,
>> I'm getting the same error:
>> dm1105 0000:04:0b.0: could not attach frontend
>>
>> Did you get your one to work.
>>
>> Thanks
>> Nameer
>>
>> Igor M. Liplianin wrote:
>>> On 18 февраля 2010, liplianin@me.by wrote:
>>>  
>>>> I also got the unbranded dm1105 card. I tried the four possible i2c
>>>> addresses, just i case. Noen worked of course. Then I traced the i2c
>>>> pins on the tuner to pins 100 and 101 on the DM1105.
>>>> These are GPIO pins, so bit-banging i2c on these pins seems to be the
>>>> solution.
>>>>
>>>> scl = p101 = gpio14
>>>> sda = p100 = gpio13
>>>>     
>>> Here is the patch to test. Use option card=4.
>>>     modprobe dm1105 card=4
>>>   
>>
>>
>>
>