Re: DM1105: could not attach frontend 195d:1105

[Nameer Kazzaz <nameer.kazzaz@gmail.com>]

Ok, no problem happy to help.

Nameer


Igor M. Liplianin wrote:
> On 23 февраля 2010 15:12:05 Nameer Kazzaz wrote:
>   
>> Sounds cool, let me know if I can help you with anything.
>>
>> Thanks
>> Nameer
>>
>> Hendrik Skarpeid wrote:
>>     
>>> No luck here either, still working on it.
>>> My plan is to solder som wires on strategic points on the board and
>>> debug i2c and other activity with an oscilloscope. Will probably start
>>> next week.
>>>
>>> Nameer Kazzaz wrote:
>>>       
>>>> Hey Igor,
>>>> I'm getting the same error:
>>>> dm1105 0000:04:0b.0: could not attach frontend
>>>>
>>>> Did you get your one to work.
>>>>
>>>> Thanks
>>>> Nameer
>>>>
>>>> Igor M. Liplianin wrote:
>>>>         
>>>>> On 18 февраля 2010, liplianin@me.by wrote:
>>>>>           
>>>>>> I also got the unbranded dm1105 card. I tried the four possible i2c
>>>>>> addresses, just i case. Noen worked of course. Then I traced the i2c
>>>>>> pins on the tuner to pins 100 and 101 on the DM1105.
>>>>>> These are GPIO pins, so bit-banging i2c on these pins seems to be the
>>>>>> solution.
>>>>>>
>>>>>> scl = p101 = gpio14
>>>>>> sda = p100 = gpio13
>>>>>>             
>>>>> Here is the patch to test. Use option card=4.
>>>>>     modprobe dm1105 card=4
>>>>>           
> I didn't test patch in real hardware.
> But I can connect GPIO14 and GPIO13 to SCL and SDA in any dm1105 card and test whether it works.
> Then I will ask you to test also.
>
>