From: thomas schorpp <thomas.schorpp@googlemail.com>
To: linux-media@vger.kernel.org
Subject: [BUG] TDA10086 : Creatix CTX929_V.1 : TS continuity errors with good RF signal input
Date: Fri, 26 Feb 2010 15:39:30 +0100 [thread overview]
Message-ID: <4B87DD22.3000209@gmail.com> (raw)
Hi,
Issue is already confirmed here:
http://www.vdr-portal.de/board/thread.php?threadid=93268
Linux 2.6.32.8, 80cm dish.
Do we have any Tuner/Decoder optimization points in the FE code?
This is not OK:
lspci -s 00:08.0 -v 00:08.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01) Subsystem: Creatix Polymedia GmbH Device 0005 Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at fbeff400 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Kernel driver in use: saa7134
grep cTS2PES /var/log/syslog
Feb 26 13:46:59 tom1 vdr: [4082] cTS2PES got 7 TS errors, 113 TS continuity errors
Feb 26 13:46:59 tom1 vdr: [4082] cTS2PES got 0 TS errors, 29 TS continuity errors
Feb 26 13:47:52 tom1 vdr: [4082] cTS2PES got 17 TS errors, 5 TS continuity errors
Feb 26 14:03:03 tom1 vdr: [4082] cTS2PES got 2 TS errors, 136 TS continuity errors
Feb 26 14:03:03 tom1 vdr: [4082] cTS2PES got 0 TS errors, 32 TS continuity errors
Feb 26 14:41:42 tom1 vdr: [4082] cTS2PES got 1 TS errors, 853 TS continuity errors
Feb 26 14:41:42 tom1 vdr: [4082] cTS2PES got 0 TS errors, 194 TS continuity errors
Feb 26 14:52:58 tom1 vdr: [4082] cTS2PES got 2 TS errors, 196 TS continuity errors
Feb 26 14:52:58 tom1 vdr: [4082] cTS2PES got 0 TS errors, 52 TS continuity errors
Feb 26 14:59:34 tom1 vdr: [4082] cTS2PES got 0 TS errors, 137 TS continuity errors
Feb 26 14:59:34 tom1 vdr: [4082] cTS2PES got 0 TS errors, 43 TS continuity errors
Feb 26 14:59:34 tom1 vdr: [4082] cTS2PES got 0 TS errors, 16 TS continuity errors
Feb 26 14:59:34 tom1 vdr: [4082] cTS2PES got 0 TS errors, 57 TS continuity errors
Feb 26 14:59:54 tom1 vdr: [4082] cTS2PES got 0 TS errors, 3 TS continuity errors
Feb 26 14:59:54 tom1 vdr: [4082] cTS2PES got 0 TS errors, 2 TS continuity errors
dvbsnoop -s feinfo -adapter 2
Current parameters:
Frequency: 1236.253 MHz
Inversion: OFF
Symbol rate: 31.794142 MSym/s
FEC: FEC 3/4
dvbsnoop -s signal -adapter 2
cycle: 1 d_time: 0.001 s Sig: 26471 SNR: 49858 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 2 d_time: 0.072 s Sig: 26471 SNR: 50115 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 3 d_time: 0.072 s Sig: 26728 SNR: 50115 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 4 d_time: 0.088 s Sig: 26728 SNR: 50115 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 5 d_time: 0.072 s Sig: 26471 SNR: 50115 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 6 d_time: 0.072 s Sig: 26471 SNR: 50115 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 7 d_time: 0.072 s Sig: 26471 SNR: 50115 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 8 d_time: 0.072 s Sig: 26471 SNR: 50115 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
Low signal strength values are AGC-loop misinterpretation as usual?
y
tom
next reply other threads:[~2010-02-26 14:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-26 14:39 thomas schorpp [this message]
2010-02-26 23:34 ` [BUG] TDA10086 : Creatix CTX929_V.1 : TS continuity errors with good RF signal input thomas schorpp
2010-02-27 0:01 ` hermann pitton
2010-02-27 0:31 ` thomas schorpp
2010-02-27 2:39 ` hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B87DD22.3000209@gmail.com \
--to=thomas.schorpp@googlemail.com \
--cc=linux-media@vger.kernel.org \
--cc=thomas.schorpp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox