From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from averell.mail.tiscali.it ([213.205.33.55]:37823 "EHLO averell.mail.tiscali.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S968507Ab0B1OwN (ORCPT ); Sun, 28 Feb 2010 09:52:13 -0500 Received: from [192.168.0.60] (78.14.35.130) by averell.mail.tiscali.it (8.0.031) id 4B5FFB30015122BA for linux-media@vger.kernel.org; Sun, 28 Feb 2010 15:52:11 +0100 Message-ID: <4B8A82CC.6000408@gmail.com> Date: Sun, 28 Feb 2010 15:50:52 +0100 From: "Andrea.Amorosi76@gmail.com" MIME-Version: 1.0 To: Linux Media Mailing List Subject: Analog TV issue with Empire Dual TV (probably wrong GPIO analogue setting) Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi to all, I've tried my Empire Dual TV usb device which is supported and correctly recognized by the kernel. Digital TV works, but analogue tv is slow and with no audio. I suppose that there is something wrong in the GPIO analogue setting. I would like to know what I can do to solve the issue. I can take an usbsnoop using windows XP virtualized with virtualbox (if feasible it is my first choice) or under windows Vista. In any case I need to know if, using usbsnoop, it is sufficient to open the program used to watch analogue tv or it is needed to tune a channel to obtain the data needed to reverse engineering the GPIO analogue setting. Finally, even if I obtain the correct usbsnoop, I'm not able to read it to extract GPIO. Is there somewhere an howto? Thank you, Andrea