* Ubuntu and AverMedia DVD EZMaker USB Gold
@ 2010-03-02 9:34 Jorge Cabrera
[not found] ` <9c4b1d601003020605t737cad37uf682184d5b264045@mail.gmail.com>
0 siblings, 1 reply; 5+ messages in thread
From: Jorge Cabrera @ 2010-03-02 9:34 UTC (permalink / raw)
To: video4linux-list
Hi everyone,
I'm trying to make an "AverMedia DVD EZMaker USB Gold" work with Ubuntu
(tried in a computer with 9.04 and other two with 9.10) with a Sony EVI
D70P Camera. I installed the linux drivers from AverMedia and when I
connect the device the system shows the following message when i run dmesg:
[69302.964025] usb 2-1: new high speed USB device using ehci_hcd and
address 6
[69303.637332] usb 2-1: configuration #1 chosen from 1 choice
[69303.860132] C038 registered V4L2 device video0[video]
[69303.860160] C038 registered V4L2 device vbi0[vbi]
[69303.860440] C038 registered ALSA sound card 2
Problem is that when I connect the camera it doesn' work, tried with
cheese, gstreamer-properties, camorama and always get the same error:
libv4l2: error getting pixformat: Invalid argument
I tried connecting the camera with s-video and composite video with the
same result. Funny thing is that I get the same error without connecting
the camera so I guess it's just a problem with the AverMedia device.
Works well on Windows.
I've been reading a lot on this but still have no clues. Has anyone got
this type of device working under linux? should I use some other driver?
I would really appreciate any help.
Cheers,
--
Jorge Cabrera
Ándago Ingeniería - www.andago.com
Teléfono: +34 916 011 373
Móvil: +34 637 741 034
e-mail: jorge.cabrera@andago.com
C/Alcalde Ángel Arroyo n.º10 1.ªPl. (28904) Getafe, Madrid
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 5+ messages in thread* Ubuntu and AverMedia DVD EZMaker USB Gold
@ 2010-03-03 10:39 Jorge Cabrera
2010-03-04 18:12 ` Jorge Cabrera
0 siblings, 1 reply; 5+ messages in thread
From: Jorge Cabrera @ 2010-03-03 10:39 UTC (permalink / raw)
To: linux-media
Hi everyone,
I'm trying to make an "AverMedia DVD EZMaker USB Gold" work with Ubuntu
(tried in a computer with 9.04 and other two with 9.10) with a Sony EVI
D70P Camera. I installed the linux drivers from AverMedia and when I
connect the device the system shows the following message when i run dmesg:
[69302.964025] usb 2-1: new high speed USB device using ehci_hcd and
address 6
[69303.637332] usb 2-1: configuration #1 chosen from 1 choice
[69303.860132] C038 registered V4L2 device video0[video]
[69303.860160] C038 registered V4L2 device vbi0[vbi]
[69303.860440] C038 registered ALSA sound card 2
Problem is that when I connect the camera it doesn' work, tried with
cheese, gstreamer-properties, camorama and always get the same error:
libv4l2: error getting pixformat: Invalid argument
I tried connecting the camera with s-video and composite video with the
same result. Funny thing is that I get the same error without connecting
the camera so I guess it's just a problem with the AverMedia device.
Works well on Windows.
I've been reading a lot on this but still have no clues. I'm going to
try with the drivers at linuxtv.org but I wanted to ask has anyone got
this type of device working under linux?
I would really appreciate any help.
Cheers,
--
Jorge Cabrera
Ándago Ingeniería - www.andago.com
Teléfono: +34 916 011 373
Móvil: +34 637 741 034
e-mail: jorge.cabrera@andago.com
C/Alcalde Ángel Arroyo n.º10 1.ªPl. (28904) Getafe, Madrid
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Ubuntu and AverMedia DVD EZMaker USB Gold
2010-03-03 10:39 Jorge Cabrera
@ 2010-03-04 18:12 ` Jorge Cabrera
2010-03-15 22:53 ` Adrian Pardini
0 siblings, 1 reply; 5+ messages in thread
From: Jorge Cabrera @ 2010-03-04 18:12 UTC (permalink / raw)
To: linux-media
Hello again,
I was wrong here, the driver works, the device works great but what's
going on is that it uses the tuner as the default input, when I run
mplayer with input=1 (composite video) or input=2 (s-video) it works good:
mplayer tv:// -tv input=1:device=/dev/video0
But this isn't good enough because cheese and camorama and flash use the
default input. How can I set up default input to composite video or
s-video? Should I add something to the options that the Avermedia kernel
module uses?
I would appreciate any help,
Cheers
Jorge Cabrera wrote:
> Hi everyone,
>
> I'm trying to make an "AverMedia DVD EZMaker USB Gold" work with
> Ubuntu (tried in a computer with 9.04 and other two with 9.10) with a
> Sony EVI D70P Camera. I installed the linux drivers from AverMedia and
> when I connect the device the system shows the following message when
> i run dmesg:
>
> [69302.964025] usb 2-1: new high speed USB device using ehci_hcd and
> address 6
> [69303.637332] usb 2-1: configuration #1 chosen from 1 choice
> [69303.860132] C038 registered V4L2 device video0[video]
> [69303.860160] C038 registered V4L2 device vbi0[vbi]
> [69303.860440] C038 registered ALSA sound card 2
>
> Problem is that when I connect the camera it doesn' work, tried with
> cheese, gstreamer-properties, camorama and always get the same error:
>
> libv4l2: error getting pixformat: Invalid argument
>
> I tried connecting the camera with s-video and composite video with
> the same result. Funny thing is that I get the same error without
> connecting the camera so I guess it's just a problem with the
> AverMedia device. Works well on Windows.
>
> I've been reading a lot on this but still have no clues. I'm going to
> try with the drivers at linuxtv.org but I wanted to ask has anyone got
> this type of device working under linux?
>
> I would really appreciate any help.
>
> Cheers,
>
--
Jorge Cabrera
Ándago Ingeniería - www.andago.com
Teléfono: +34 916 011 373
Móvil: +34 637 741 034
e-mail: jorge.cabrera@andago.com
C/Alcalde Ángel Arroyo n.º10 1.ªPl. (28904) Getafe, Madrid
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Ubuntu and AverMedia DVD EZMaker USB Gold
2010-03-04 18:12 ` Jorge Cabrera
@ 2010-03-15 22:53 ` Adrian Pardini
0 siblings, 0 replies; 5+ messages in thread
From: Adrian Pardini @ 2010-03-15 22:53 UTC (permalink / raw)
To: Linux Media Mailing List; +Cc: Jorge Cabrera
On 04/03/2010, Jorge Cabrera <jorge.cabrera@andago.com> wrote:
> Hello again,
>
> I was wrong here, the driver works, the device works great but what's
> going on is that it uses the tuner as the default input, when I run
> mplayer with input=1 (composite video) or input=2 (s-video) it works good:
>
> mplayer tv:// -tv input=1:device=/dev/video0
>
> But this isn't good enough because cheese and camorama and flash use the
> default input. How can I set up default input to composite video or
> s-video? Should I add something to the options that the Avermedia kernel
> module uses?
Try using the v4lctl command. Something like
v4lctl setinput Composite1
will do. You can replace "Composite1" with other names like Television
etc. The manpage has more information.
--
Adrian.
http://elesquinazotango.com.ar
http://www.noalcodigodescioli.blogspot.com/
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-03-15 22:53 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-02 9:34 Ubuntu and AverMedia DVD EZMaker USB Gold Jorge Cabrera
[not found] ` <9c4b1d601003020605t737cad37uf682184d5b264045@mail.gmail.com>
2010-03-02 14:06 ` Adrian Pardini
-- strict thread matches above, loose matches on Subject: below --
2010-03-03 10:39 Jorge Cabrera
2010-03-04 18:12 ` Jorge Cabrera
2010-03-15 22:53 ` Adrian Pardini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox