* [PATCH] saa7134: add support for one more remote control for Avermedia M135A
@ 2010-03-19 17:55 Herton Ronaldo Krzesinski
2010-03-19 21:56 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 4+ messages in thread
From: Herton Ronaldo Krzesinski @ 2010-03-19 17:55 UTC (permalink / raw)
To: linux-media; +Cc: Mauro Carvalho Chehab
This change adds support for one more remote control type for Avermedia
M135A. The new remote control reports slightly different codes, and was
necessary to extend the mask_keycode to differentiate between original
remote control. One of the remote controls I had matched the original
binding, but some keys reported duplicated codes, probably because the
previous mask_keycode missing valid bits, so this should fix also
original remote control support ("The keys bellow aren't ok" comment).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
---
drivers/media/IR/ir-keymaps.c | 141 +++++++++++++++++++---------
drivers/media/video/saa7134/saa7134-input.c | 2
2 files changed, 97 insertions(+), 46 deletions(-)
(sorry this is a resend of previous patch, I forgot [PATCH] in subject)
diff -p -up linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c.orig linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c
--- linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c.orig 2010-03-18 22:25:12.000000000 -0300
+++ linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c 2010-03-18 22:46:29.000000000 -0300
@@ -122,51 +122,102 @@ EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvb
/* Mauro Carvalho Chehab <mchehab@infradead.org> */
static struct ir_scancode ir_codes_avermedia_m135a[] = {
- { 0x00, KEY_POWER2 },
- { 0x2e, KEY_DOT }, /* '.' */
- { 0x01, KEY_MODE }, /* TV/FM */
-
- { 0x05, KEY_1 },
- { 0x06, KEY_2 },
- { 0x07, KEY_3 },
- { 0x09, KEY_4 },
- { 0x0a, KEY_5 },
- { 0x0b, KEY_6 },
- { 0x0d, KEY_7 },
- { 0x0e, KEY_8 },
- { 0x0f, KEY_9 },
- { 0x11, KEY_0 },
-
- { 0x13, KEY_RIGHT }, /* -> */
- { 0x12, KEY_LEFT }, /* <- */
-
- { 0x17, KEY_SLEEP }, /* Capturar Imagem */
- { 0x10, KEY_SHUFFLE }, /* Amostra */
-
- /* FIXME: The keys bellow aren't ok */
-
- { 0x43, KEY_CHANNELUP },
- { 0x42, KEY_CHANNELDOWN },
- { 0x1f, KEY_VOLUMEUP },
- { 0x1e, KEY_VOLUMEDOWN },
- { 0x0c, KEY_ENTER },
-
- { 0x14, KEY_MUTE },
- { 0x08, KEY_AUDIO },
-
- { 0x03, KEY_TEXT },
- { 0x04, KEY_EPG },
- { 0x2b, KEY_TV2 }, /* TV2 */
-
- { 0x1d, KEY_RED },
- { 0x1c, KEY_YELLOW },
- { 0x41, KEY_GREEN },
- { 0x40, KEY_BLUE },
-
- { 0x1a, KEY_PLAYPAUSE },
- { 0x19, KEY_RECORD },
- { 0x18, KEY_PLAY },
- { 0x1b, KEY_STOP },
+ /* Remote control type 01 (32/54 keys) */
+ { 0x100, KEY_POWER2 },
+ { 0x12e, KEY_DOT }, /* '.' */
+ { 0x101, KEY_MODE }, /* TV/FM */
+
+ { 0x105, KEY_1 },
+ { 0x106, KEY_2 },
+ { 0x107, KEY_3 },
+ { 0x109, KEY_4 },
+ { 0x10a, KEY_5 },
+ { 0x10b, KEY_6 },
+ { 0x10d, KEY_7 },
+ { 0x10e, KEY_8 },
+ { 0x10f, KEY_9 },
+ { 0x111, KEY_0 },
+
+ { 0x113, KEY_RIGHT }, /* -> */
+ { 0x112, KEY_LEFT }, /* <- */
+
+ { 0x117, KEY_SHUFFLE }, /* Capturar Imagem */
+ { 0x110, KEY_F13 }, /* Amostra */
+
+ { 0x183, KEY_CHANNELUP },
+ { 0x182, KEY_CHANNELDOWN },
+ { 0x11f, KEY_VOLUMEUP },
+ { 0x11e, KEY_VOLUMEDOWN },
+ { 0x10c, KEY_ENTER },
+
+ { 0x114, KEY_MUTE },
+ { 0x108, KEY_AUDIO },
+
+ { 0x103, KEY_TEXT },
+ { 0x104, KEY_EPG },
+ { 0x12b, KEY_TV2 }, /* TV2 */
+
+ { 0x11d, KEY_RED },
+ { 0x11c, KEY_YELLOW },
+ { 0x181, KEY_GREEN },
+ { 0x180, KEY_BLUE },
+
+ { 0x11a, KEY_PLAYPAUSE },
+ { 0x119, KEY_RECORD },
+ { 0x118, KEY_PLAY },
+ { 0x11b, KEY_STOP },
+
+ /* Remote control type 04 (44 keys) */
+ { 0x201, KEY_POWER2 },
+ { 0x206, KEY_MUTE },
+ { 0x208, KEY_MODE },
+
+ { 0x209, KEY_1 },
+ { 0x20a, KEY_2 },
+ { 0x20b, KEY_3 },
+ { 0x20c, KEY_4 },
+ { 0x20d, KEY_5 },
+ { 0x20e, KEY_6 },
+ { 0x20f, KEY_7 },
+ { 0x210, KEY_8 },
+ { 0x211, KEY_9 },
+ { 0x24c, KEY_DOT },
+ { 0x212, KEY_0 },
+ { 0x207, KEY_LAST },
+
+ { 0x213, KEY_AUDIO },
+ { 0x240, KEY_ZOOM },
+ { 0x241, KEY_HOME },
+ { 0x242, KEY_BACK },
+ { 0x247, KEY_UP },
+ { 0x248, KEY_DOWN },
+ { 0x249, KEY_LEFT },
+ { 0x24a, KEY_RIGHT },
+ { 0x24b, KEY_OK },
+ { 0x204, KEY_VOLUMEUP },
+ { 0x205, KEY_VOLUMEDOWN },
+ { 0x202, KEY_CHANNELUP },
+ { 0x203, KEY_CHANNELDOWN },
+
+ { 0x243, KEY_TV },
+ { 0x244, KEY_VIDEO },
+ { 0x245, KEY_MP3 },
+ { 0x246, KEY_MHP },
+
+ { 0x214, KEY_TEXT },
+ { 0x215, KEY_EPG },
+ { 0x21a, KEY_MEDIA },
+ { 0x21b, KEY_SHUFFLE },
+
+ { 0x217, KEY_RECORD },
+ { 0x216, KEY_PLAYPAUSE },
+ { 0x218, KEY_STOP },
+ { 0x219, KEY_PAUSE },
+
+ { 0x21f, KEY_PREVIOUS },
+ { 0x21d, KEY_REWIND },
+ { 0x21c, KEY_FORWARD },
+ { 0x21e, KEY_NEXT },
};
struct ir_scancode_table ir_codes_avermedia_m135a_table = {
diff -p -up linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c.orig linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c
--- linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c.orig 2010-03-18 22:23:50.000000000 -0300
+++ linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c 2010-03-18 23:40:01.000000000 -0300
@@ -523,7 +523,7 @@ int saa7134_input_init1(struct saa7134_d
case SAA7134_BOARD_AVERMEDIA_M135A:
ir_codes = &ir_codes_avermedia_m135a_table;
mask_keydown = 0x0040000;
- mask_keycode = 0x00013f;
+ mask_keycode = 0x00077f;
nec_gpio = 1;
break;
case SAA7134_BOARD_AVERMEDIA_777:
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] saa7134: add support for one more remote control for Avermedia M135A 2010-03-19 17:55 [PATCH] saa7134: add support for one more remote control for Avermedia M135A Herton Ronaldo Krzesinski @ 2010-03-19 21:56 ` Mauro Carvalho Chehab 2010-03-19 22:25 ` Herton Ronaldo Krzesinski 0 siblings, 1 reply; 4+ messages in thread From: Mauro Carvalho Chehab @ 2010-03-19 21:56 UTC (permalink / raw) To: Herton Ronaldo Krzesinski; +Cc: linux-media Hi Herton, Herton Ronaldo Krzesinski wrote: > This change adds support for one more remote control type for Avermedia > M135A. The new remote control reports slightly different codes, and was > necessary to extend the mask_keycode to differentiate between original > remote control. One of the remote controls I had matched the original > binding, but some keys reported duplicated codes, probably because the > previous mask_keycode missing valid bits, so this should fix also > original remote control support ("The keys bellow aren't ok" comment). It would be a way better to extend it to use the full address+command scancode (16 bits, being 13 or 14 used). This would allow using this board with universal IR's and other third party ones. That's said, I have one of such board here, with one IR control (mine has the small control labaled RM-JX). As I have some things to do with IR core support, I'll do some tests in order to extend the IR support on saa7134 in order to get the full IR code and remap this IR. > > Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> > --- > drivers/media/IR/ir-keymaps.c | 141 +++++++++++++++++++--------- > drivers/media/video/saa7134/saa7134-input.c | 2 > 2 files changed, 97 insertions(+), 46 deletions(-) > > (sorry this is a resend of previous patch, I forgot [PATCH] in subject) > > diff -p -up linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c.orig linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c > --- linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c.orig 2010-03-18 22:25:12.000000000 -0300 > +++ linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c 2010-03-18 22:46:29.000000000 -0300 > @@ -122,51 +122,102 @@ EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvb > > /* Mauro Carvalho Chehab <mchehab@infradead.org> */ > static struct ir_scancode ir_codes_avermedia_m135a[] = { > - { 0x00, KEY_POWER2 }, > - { 0x2e, KEY_DOT }, /* '.' */ > - { 0x01, KEY_MODE }, /* TV/FM */ > - > - { 0x05, KEY_1 }, > - { 0x06, KEY_2 }, > - { 0x07, KEY_3 }, > - { 0x09, KEY_4 }, > - { 0x0a, KEY_5 }, > - { 0x0b, KEY_6 }, > - { 0x0d, KEY_7 }, > - { 0x0e, KEY_8 }, > - { 0x0f, KEY_9 }, > - { 0x11, KEY_0 }, > - > - { 0x13, KEY_RIGHT }, /* -> */ > - { 0x12, KEY_LEFT }, /* <- */ > - > - { 0x17, KEY_SLEEP }, /* Capturar Imagem */ > - { 0x10, KEY_SHUFFLE }, /* Amostra */ > - > - /* FIXME: The keys bellow aren't ok */ > - > - { 0x43, KEY_CHANNELUP }, > - { 0x42, KEY_CHANNELDOWN }, > - { 0x1f, KEY_VOLUMEUP }, > - { 0x1e, KEY_VOLUMEDOWN }, > - { 0x0c, KEY_ENTER }, > - > - { 0x14, KEY_MUTE }, > - { 0x08, KEY_AUDIO }, > - > - { 0x03, KEY_TEXT }, > - { 0x04, KEY_EPG }, > - { 0x2b, KEY_TV2 }, /* TV2 */ > - > - { 0x1d, KEY_RED }, > - { 0x1c, KEY_YELLOW }, > - { 0x41, KEY_GREEN }, > - { 0x40, KEY_BLUE }, > - > - { 0x1a, KEY_PLAYPAUSE }, > - { 0x19, KEY_RECORD }, > - { 0x18, KEY_PLAY }, > - { 0x1b, KEY_STOP }, > + /* Remote control type 01 (32/54 keys) */ > + { 0x100, KEY_POWER2 }, > + { 0x12e, KEY_DOT }, /* '.' */ > + { 0x101, KEY_MODE }, /* TV/FM */ > + > + { 0x105, KEY_1 }, > + { 0x106, KEY_2 }, > + { 0x107, KEY_3 }, > + { 0x109, KEY_4 }, > + { 0x10a, KEY_5 }, > + { 0x10b, KEY_6 }, > + { 0x10d, KEY_7 }, > + { 0x10e, KEY_8 }, > + { 0x10f, KEY_9 }, > + { 0x111, KEY_0 }, > + > + { 0x113, KEY_RIGHT }, /* -> */ > + { 0x112, KEY_LEFT }, /* <- */ > + > + { 0x117, KEY_SHUFFLE }, /* Capturar Imagem */ > + { 0x110, KEY_F13 }, /* Amostra */ > + > + { 0x183, KEY_CHANNELUP }, > + { 0x182, KEY_CHANNELDOWN }, > + { 0x11f, KEY_VOLUMEUP }, > + { 0x11e, KEY_VOLUMEDOWN }, > + { 0x10c, KEY_ENTER }, > + > + { 0x114, KEY_MUTE }, > + { 0x108, KEY_AUDIO }, > + > + { 0x103, KEY_TEXT }, > + { 0x104, KEY_EPG }, > + { 0x12b, KEY_TV2 }, /* TV2 */ > + > + { 0x11d, KEY_RED }, > + { 0x11c, KEY_YELLOW }, > + { 0x181, KEY_GREEN }, > + { 0x180, KEY_BLUE }, > + > + { 0x11a, KEY_PLAYPAUSE }, > + { 0x119, KEY_RECORD }, > + { 0x118, KEY_PLAY }, > + { 0x11b, KEY_STOP }, > + > + /* Remote control type 04 (44 keys) */ > + { 0x201, KEY_POWER2 }, > + { 0x206, KEY_MUTE }, > + { 0x208, KEY_MODE }, > + > + { 0x209, KEY_1 }, > + { 0x20a, KEY_2 }, > + { 0x20b, KEY_3 }, > + { 0x20c, KEY_4 }, > + { 0x20d, KEY_5 }, > + { 0x20e, KEY_6 }, > + { 0x20f, KEY_7 }, > + { 0x210, KEY_8 }, > + { 0x211, KEY_9 }, > + { 0x24c, KEY_DOT }, > + { 0x212, KEY_0 }, > + { 0x207, KEY_LAST }, > + > + { 0x213, KEY_AUDIO }, > + { 0x240, KEY_ZOOM }, > + { 0x241, KEY_HOME }, > + { 0x242, KEY_BACK }, > + { 0x247, KEY_UP }, > + { 0x248, KEY_DOWN }, > + { 0x249, KEY_LEFT }, > + { 0x24a, KEY_RIGHT }, > + { 0x24b, KEY_OK }, > + { 0x204, KEY_VOLUMEUP }, > + { 0x205, KEY_VOLUMEDOWN }, > + { 0x202, KEY_CHANNELUP }, > + { 0x203, KEY_CHANNELDOWN }, > + > + { 0x243, KEY_TV }, > + { 0x244, KEY_VIDEO }, > + { 0x245, KEY_MP3 }, > + { 0x246, KEY_MHP }, > + > + { 0x214, KEY_TEXT }, > + { 0x215, KEY_EPG }, > + { 0x21a, KEY_MEDIA }, > + { 0x21b, KEY_SHUFFLE }, > + > + { 0x217, KEY_RECORD }, > + { 0x216, KEY_PLAYPAUSE }, > + { 0x218, KEY_STOP }, > + { 0x219, KEY_PAUSE }, > + > + { 0x21f, KEY_PREVIOUS }, > + { 0x21d, KEY_REWIND }, > + { 0x21c, KEY_FORWARD }, > + { 0x21e, KEY_NEXT }, > }; > > struct ir_scancode_table ir_codes_avermedia_m135a_table = { > diff -p -up linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c.orig linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c > --- linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c.orig 2010-03-18 22:23:50.000000000 -0300 > +++ linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c 2010-03-18 23:40:01.000000000 -0300 > @@ -523,7 +523,7 @@ int saa7134_input_init1(struct saa7134_d > case SAA7134_BOARD_AVERMEDIA_M135A: > ir_codes = &ir_codes_avermedia_m135a_table; > mask_keydown = 0x0040000; > - mask_keycode = 0x00013f; > + mask_keycode = 0x00077f; > nec_gpio = 1; > break; > case SAA7134_BOARD_AVERMEDIA_777: -- Cheers, Mauro ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] saa7134: add support for one more remote control for Avermedia M135A 2010-03-19 21:56 ` Mauro Carvalho Chehab @ 2010-03-19 22:25 ` Herton Ronaldo Krzesinski 2010-03-19 22:29 ` Mauro Carvalho Chehab 0 siblings, 1 reply; 4+ messages in thread From: Herton Ronaldo Krzesinski @ 2010-03-19 22:25 UTC (permalink / raw) To: Mauro Carvalho Chehab; +Cc: linux-media Em Sex 19 Mar 2010, às 18:56:57, Mauro Carvalho Chehab escreveu: > Hi Herton, > > Herton Ronaldo Krzesinski wrote: > > This change adds support for one more remote control type for Avermedia > > M135A. The new remote control reports slightly different codes, and was > > necessary to extend the mask_keycode to differentiate between original > > remote control. One of the remote controls I had matched the original > > binding, but some keys reported duplicated codes, probably because the > > previous mask_keycode missing valid bits, so this should fix also > > original remote control support ("The keys bellow aren't ok" comment). > > It would be a way better to extend it to use the full address+command scancode > (16 bits, being 13 or 14 used). This would allow using this board with > universal IR's and other third party ones. > > That's said, I have one of such board here, with one IR control (mine has the > small control labaled RM-JX). > > As I have some things to do with IR core support, I'll do some tests in order > to extend the IR support on saa7134 in order to get the full IR code and remap > this IR. Ok, when you have done it feel free to ask me to test any patches you have etc., my control is labeled RM-K6, supplied by Avermedia I suppose to Positivo (this controler comes with Positivo "PC-TV" machine with Avermedia card) , and the original IR control unfortunately I don't have anymore here to test. I suppose there would be more control types as well which Avermedia ships... > > > > > Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> > > --- > > drivers/media/IR/ir-keymaps.c | 141 +++++++++++++++++++--------- > > drivers/media/video/saa7134/saa7134-input.c | 2 > > 2 files changed, 97 insertions(+), 46 deletions(-) > > > > (sorry this is a resend of previous patch, I forgot [PATCH] in subject) > > > > diff -p -up linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c.orig linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c > > --- linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c.orig 2010-03-18 22:25:12.000000000 -0300 > > +++ linux-2.6.33.1-1.1mnb/drivers/media/IR/ir-keymaps.c 2010-03-18 22:46:29.000000000 -0300 > > @@ -122,51 +122,102 @@ EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvb > > > > /* Mauro Carvalho Chehab <mchehab@infradead.org> */ > > static struct ir_scancode ir_codes_avermedia_m135a[] = { > > - { 0x00, KEY_POWER2 }, > > - { 0x2e, KEY_DOT }, /* '.' */ > > - { 0x01, KEY_MODE }, /* TV/FM */ > > - > > - { 0x05, KEY_1 }, > > - { 0x06, KEY_2 }, > > - { 0x07, KEY_3 }, > > - { 0x09, KEY_4 }, > > - { 0x0a, KEY_5 }, > > - { 0x0b, KEY_6 }, > > - { 0x0d, KEY_7 }, > > - { 0x0e, KEY_8 }, > > - { 0x0f, KEY_9 }, > > - { 0x11, KEY_0 }, > > - > > - { 0x13, KEY_RIGHT }, /* -> */ > > - { 0x12, KEY_LEFT }, /* <- */ > > - > > - { 0x17, KEY_SLEEP }, /* Capturar Imagem */ > > - { 0x10, KEY_SHUFFLE }, /* Amostra */ > > - > > - /* FIXME: The keys bellow aren't ok */ > > - > > - { 0x43, KEY_CHANNELUP }, > > - { 0x42, KEY_CHANNELDOWN }, > > - { 0x1f, KEY_VOLUMEUP }, > > - { 0x1e, KEY_VOLUMEDOWN }, > > - { 0x0c, KEY_ENTER }, > > - > > - { 0x14, KEY_MUTE }, > > - { 0x08, KEY_AUDIO }, > > - > > - { 0x03, KEY_TEXT }, > > - { 0x04, KEY_EPG }, > > - { 0x2b, KEY_TV2 }, /* TV2 */ > > - > > - { 0x1d, KEY_RED }, > > - { 0x1c, KEY_YELLOW }, > > - { 0x41, KEY_GREEN }, > > - { 0x40, KEY_BLUE }, > > - > > - { 0x1a, KEY_PLAYPAUSE }, > > - { 0x19, KEY_RECORD }, > > - { 0x18, KEY_PLAY }, > > - { 0x1b, KEY_STOP }, > > + /* Remote control type 01 (32/54 keys) */ > > + { 0x100, KEY_POWER2 }, > > + { 0x12e, KEY_DOT }, /* '.' */ > > + { 0x101, KEY_MODE }, /* TV/FM */ > > + > > + { 0x105, KEY_1 }, > > + { 0x106, KEY_2 }, > > + { 0x107, KEY_3 }, > > + { 0x109, KEY_4 }, > > + { 0x10a, KEY_5 }, > > + { 0x10b, KEY_6 }, > > + { 0x10d, KEY_7 }, > > + { 0x10e, KEY_8 }, > > + { 0x10f, KEY_9 }, > > + { 0x111, KEY_0 }, > > + > > + { 0x113, KEY_RIGHT }, /* -> */ > > + { 0x112, KEY_LEFT }, /* <- */ > > + > > + { 0x117, KEY_SHUFFLE }, /* Capturar Imagem */ > > + { 0x110, KEY_F13 }, /* Amostra */ > > + > > + { 0x183, KEY_CHANNELUP }, > > + { 0x182, KEY_CHANNELDOWN }, > > + { 0x11f, KEY_VOLUMEUP }, > > + { 0x11e, KEY_VOLUMEDOWN }, > > + { 0x10c, KEY_ENTER }, > > + > > + { 0x114, KEY_MUTE }, > > + { 0x108, KEY_AUDIO }, > > + > > + { 0x103, KEY_TEXT }, > > + { 0x104, KEY_EPG }, > > + { 0x12b, KEY_TV2 }, /* TV2 */ > > + > > + { 0x11d, KEY_RED }, > > + { 0x11c, KEY_YELLOW }, > > + { 0x181, KEY_GREEN }, > > + { 0x180, KEY_BLUE }, > > + > > + { 0x11a, KEY_PLAYPAUSE }, > > + { 0x119, KEY_RECORD }, > > + { 0x118, KEY_PLAY }, > > + { 0x11b, KEY_STOP }, > > + > > + /* Remote control type 04 (44 keys) */ > > + { 0x201, KEY_POWER2 }, > > + { 0x206, KEY_MUTE }, > > + { 0x208, KEY_MODE }, > > + > > + { 0x209, KEY_1 }, > > + { 0x20a, KEY_2 }, > > + { 0x20b, KEY_3 }, > > + { 0x20c, KEY_4 }, > > + { 0x20d, KEY_5 }, > > + { 0x20e, KEY_6 }, > > + { 0x20f, KEY_7 }, > > + { 0x210, KEY_8 }, > > + { 0x211, KEY_9 }, > > + { 0x24c, KEY_DOT }, > > + { 0x212, KEY_0 }, > > + { 0x207, KEY_LAST }, > > + > > + { 0x213, KEY_AUDIO }, > > + { 0x240, KEY_ZOOM }, > > + { 0x241, KEY_HOME }, > > + { 0x242, KEY_BACK }, > > + { 0x247, KEY_UP }, > > + { 0x248, KEY_DOWN }, > > + { 0x249, KEY_LEFT }, > > + { 0x24a, KEY_RIGHT }, > > + { 0x24b, KEY_OK }, > > + { 0x204, KEY_VOLUMEUP }, > > + { 0x205, KEY_VOLUMEDOWN }, > > + { 0x202, KEY_CHANNELUP }, > > + { 0x203, KEY_CHANNELDOWN }, > > + > > + { 0x243, KEY_TV }, > > + { 0x244, KEY_VIDEO }, > > + { 0x245, KEY_MP3 }, > > + { 0x246, KEY_MHP }, > > + > > + { 0x214, KEY_TEXT }, > > + { 0x215, KEY_EPG }, > > + { 0x21a, KEY_MEDIA }, > > + { 0x21b, KEY_SHUFFLE }, > > + > > + { 0x217, KEY_RECORD }, > > + { 0x216, KEY_PLAYPAUSE }, > > + { 0x218, KEY_STOP }, > > + { 0x219, KEY_PAUSE }, > > + > > + { 0x21f, KEY_PREVIOUS }, > > + { 0x21d, KEY_REWIND }, > > + { 0x21c, KEY_FORWARD }, > > + { 0x21e, KEY_NEXT }, > > }; > > > > struct ir_scancode_table ir_codes_avermedia_m135a_table = { > > diff -p -up linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c.orig linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c > > --- linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c.orig 2010-03-18 22:23:50.000000000 -0300 > > +++ linux-2.6.33.1-1.1mnb/drivers/media/video/saa7134/saa7134-input.c 2010-03-18 23:40:01.000000000 -0300 > > @@ -523,7 +523,7 @@ int saa7134_input_init1(struct saa7134_d > > case SAA7134_BOARD_AVERMEDIA_M135A: > > ir_codes = &ir_codes_avermedia_m135a_table; > > mask_keydown = 0x0040000; > > - mask_keycode = 0x00013f; > > + mask_keycode = 0x00077f; > > nec_gpio = 1; > > break; > > case SAA7134_BOARD_AVERMEDIA_777: > > > -- []'s Herton ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] saa7134: add support for one more remote control for Avermedia M135A 2010-03-19 22:25 ` Herton Ronaldo Krzesinski @ 2010-03-19 22:29 ` Mauro Carvalho Chehab 0 siblings, 0 replies; 4+ messages in thread From: Mauro Carvalho Chehab @ 2010-03-19 22:29 UTC (permalink / raw) To: Herton Ronaldo Krzesinski; +Cc: linux-media Herton Ronaldo Krzesinski wrote: > Em Sex 19 Mar 2010, às 18:56:57, Mauro Carvalho Chehab escreveu: >> Hi Herton, >> >> Herton Ronaldo Krzesinski wrote: >>> This change adds support for one more remote control type for Avermedia >>> M135A. The new remote control reports slightly different codes, and was >>> necessary to extend the mask_keycode to differentiate between original >>> remote control. One of the remote controls I had matched the original >>> binding, but some keys reported duplicated codes, probably because the >>> previous mask_keycode missing valid bits, so this should fix also >>> original remote control support ("The keys bellow aren't ok" comment). >> It would be a way better to extend it to use the full address+command scancode >> (16 bits, being 13 or 14 used). This would allow using this board with >> universal IR's and other third party ones. >> >> That's said, I have one of such board here, with one IR control (mine has the >> small control labaled RM-JX). >> >> As I have some things to do with IR core support, I'll do some tests in order >> to extend the IR support on saa7134 in order to get the full IR code and remap >> this IR. > > Ok, when you have done it feel free to ask me to test any patches you have > etc., my control is labeled RM-K6, supplied by Avermedia I suppose to Positivo > (this controler comes with Positivo "PC-TV" machine with Avermedia card) , and > the original IR control unfortunately I don't have anymore here to test. I > suppose there would be more control types as well which Avermedia ships... I had once one of those "Positivo" IR's from Avermedia. Yes, for sure there are more IR's. By doing it right, replacing the IR map will be just a matter of calling ir-keycode application, from v4l-utils (assuming the latest V4L/DVB drivers with the proper /sys/class/irrcv nodes). -- Cheers, Mauro ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-03-19 22:29 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-03-19 17:55 [PATCH] saa7134: add support for one more remote control for Avermedia M135A Herton Ronaldo Krzesinski 2010-03-19 21:56 ` Mauro Carvalho Chehab 2010-03-19 22:25 ` Herton Ronaldo Krzesinski 2010-03-19 22:29 ` Mauro Carvalho Chehab
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox