public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: william <kc@cobradevil.org>
To: linux-media@vger.kernel.org
Subject: Re: tevii s660 system slow/freeze
Date: Wed, 24 Mar 2010 06:46:06 +0100	[thread overview]
Message-ID: <4BA9A71E.6090309@cobradevil.org> (raw)
In-Reply-To: <54510.83.83.244.249.1269102017.squirrel@webmail.spothost.nl>

Update

it was a problem with the device itself.

I have send it back to my supplier for rma.

With kind regards

William
On 03/20/2010 05:20 PM, kc@cobradevil.org wrote:
> Dear mailinglist/Tevii,
>
> i have received a new tevii s660 yesterday.
> I have tried to use the device with scan but then my system freezes/slows
> down and i don't get any channels. Also when i create a channel list with
> my nova 2 hd and check if that works with vdr, then i removed the drivers
> from the nova card and plugged in the s660 and started vdr. But then still
> no picture only system freeze/slow down. I get nothing in the logs so it
> seems a driver issue.
>
> i have tried the drivers from the tevii site and also tried the 2.6.34rc1
> kernel from ubuntu. I also tried it on 3 different systems but to no
> avail.
>
> in dmesg i get:
> [16735.496800] usbcore: deregistering interface driver dw2102
> [16735.562114] dvb-usb: TeVii S660 USB successfully deinitialized and
> disconnected.
> [16737.219577] dvb-usb: found a 'TeVii S660 USB' in cold state, will try
> to load a firmware
> [16737.219593] usb 1-1: firmware: requesting dvb-usb-teviis660.fw
> [16737.229441] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw'
> [16737.229453] dw2102: start downloading DW210X firmware
> [16737.350052] dvb-usb: found a 'TeVii S660 USB' in warm state.
> [16737.350171] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [16737.350414] DVB: registering new adapter (TeVii S660 USB)
> [16747.590032] dvb-usb: MAC address: 00:18:bd:5c:55:bb
> [16747.650033] Only Zarlink VP310/MT312/ZL10313 are supported chips.
> [16748.074008] DS3000 chip version: 0.192 attached.
> [16748.074015] dw2102: Attached ds3000+ds2020!
> [16748.074017]
> [16748.074189] DVB: registering adapter 0 frontend 0 (Montage Technology
> DS3000/TS2020)...
> [16748.076014] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input11
> [16748.076312] dvb-usb: schedule remote query interval to 150 msecs.
> [16748.076327] dvb-usb: TeVii S660 USB successfully initialized and
> connected.
> [16748.076596] usbcore: registered new interface driver dw2102
>
>
> and after that i only see:
> [16748.224312] dw2102: query RC enter
> [16748.224320] dw2102: query RC start
> [16748.246317] dw2102: query RC end
> [16748.396311] dw2102: query RC enter
> [16748.396320] dw2102: query RC start
> [16748.415313] dw2102: query RC end
> [16748.561641] dw2102: query RC enter
> [16748.561650] dw2102: query RC start
> [16748.585317] dw2102: query RC end
>
>
> over and over just filling the logs. i saw that it was from/for the remote
> but it looks like debug messages.
>
> I have tried 3 different kernels 2.6.32/3/4rc1 but they all have the same
> issue with the driver from 15 march.
>
> What can be wrong?
> Any suggestions how i can troubleshoot this?
>
> With kind regards
> William van de Velde
>
>
> new tevii S660 system slow/freeze no channels linux
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>    


      reply	other threads:[~2010-03-24  5:52 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-20 16:20 tevii s660 system slow/freeze kc
2010-03-24  5:46 ` william [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4BA9A71E.6090309@cobradevil.org \
    --to=kc@cobradevil.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox