From: Mark Lord <mlord@pobox.com>
To: Andy Walls <awalls@md.metrocast.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
linux-media@vger.kernel.org, ivtv-devel@ivtvdriver.org,
Darren Blaber <dmbtech@gmail.com>
Subject: Re: cx18: "missing audio" for analog recordings
Date: Wed, 14 Apr 2010 00:34:08 -0400 [thread overview]
Message-ID: <4BC545C0.4030506@pobox.com> (raw)
In-Reply-To: <4BC54569.7020301@pobox.com>
On 14/04/10 12:32 AM, Mark Lord wrote:
..
> Thanks. I'll have a go at that some night.
>
> Meanwhile, tonight, audio failed.
..
Oh, I forgot to include this:
Apr 13 22:00:05 duke kernel: cx18-0: ================= START STATUS CARD #0 =================
Apr 13 22:00:05 duke kernel: cx18-0: Version: 1.4.0 Card: Hauppauge HVR-1600
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: Hauppauge model 74551, rev C1A3, serial# 1752579
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: MAC address is 00:0d:fe:1a:be:03
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: audio processor is CX23418 (idx 38)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: decoder processor is CX23418 (idx 31)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: has radio
Apr 13 22:00:05 duke kernel: cx18-0 843: Video signal: present
Apr 13 22:00:05 duke kernel: cx18-0 843: Detected format: NTSC-M
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified standard: NTSC-M
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified video input: Composite 7
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified audioclock freq: 48000 Hz
Apr 13 22:00:05 duke kernel: cx18-0 843: Detected audio mode: forced mode
Apr 13 22:00:05 duke kernel: cx18-0 843: Detected audio standard: forced audio standard
Apr 13 22:00:05 duke kernel: cx18-0 843: Audio muted: no
Apr 13 22:00:05 duke kernel: cx18-0 843: Audio microcontroller: running
Apr 13 22:00:05 duke kernel: cx18-0 843: Configured audio standard: BTSC
Apr 13 22:00:05 duke kernel: cx18-0 843: Configured audio mode: MONO2 (LANGUAGE B)
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified audio input: Tuner (In8)
Apr 13 22:00:05 duke kernel: cx18-0 843: Preferred audio mode: stereo
Apr 13 22:00:05 duke kernel: cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value 0x00003001
Apr 13 22:00:05 duke kernel: tda9887 2-0043: Data bytes: b=0x14 c=0x30 e=0x44
Apr 13 22:00:05 duke kernel: tuner 2-0061: Tuner mode: analog TV
Apr 13 22:00:05 duke kernel: tuner 2-0061: Frequency: 531.25 MHz
Apr 13 22:00:05 duke kernel: tuner 2-0061: Standard: 0x0000b000
Apr 13 22:00:05 duke kernel: cs5345 1-004c: Input: 1
Apr 13 22:00:05 duke kernel: cs5345 1-004c: Volume: 0 dB
Apr 13 22:00:05 duke kernel: cx18-0: Video Input: Tuner 1
Apr 13 22:00:05 duke kernel: cx18-0: Audio Input: Tuner 1
Apr 13 22:00:05 duke kernel: cx18-0: GPIO: direction 0x00003001, value 0x00003001
Apr 13 22:00:05 duke kernel: cx18-0: Tuner: TV
Apr 13 22:00:05 duke kernel: cx18-0: Stream: MPEG-2 Program Stream
Apr 13 22:00:05 duke kernel: cx18-0: VBI Format: Private packet, IVTV format
Apr 13 22:00:05 duke kernel: cx18-0: Video: 720x480, 30 fps
Apr 13 22:00:05 duke kernel: cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 12000000, Peak 14500000
Apr 13 22:00:05 duke kernel: cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
Apr 13 22:00:05 duke kernel: cx18-0: Audio: 48 kHz, MPEG-1/2 Layer II, 224 kbps, Stereo, No Emphasis, No CRC
Apr 13 22:00:05 duke kernel: cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0
Apr 13 22:00:05 duke kernel: cx18-0: Temporal Filter: Manual, 8
Apr 13 22:00:05 duke kernel: cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
Apr 13 22:00:05 duke kernel: cx18-0: Status flags: 0x00200001
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder MPEG: status 0x0118, 0% of 2048 KiB (64 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder YUV: status 0x0000, 0% of 2025 KiB (20 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder VBI: status 0x0038, 5% of 1015 KiB (20 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB (256 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Read MPEG/VBI: 190420992/476784 bytes
Apr 13 22:00:05 duke kernel: cx18-0: ================== END STATUS CARD #0 ==================
--
Mark Lord
Real-Time Remedies Inc.
mlord@pobox.com
next prev parent reply other threads:[~2010-04-14 4:34 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-01 16:07 cx18: Unable to find blank work order form to schedule incoming mailbox Mark Lord
2010-03-02 1:34 ` Andy Walls
2010-03-02 5:57 ` Mark Lord
2010-03-02 12:40 ` Andy Walls
2010-03-02 15:00 ` Mark Lord
2010-03-03 1:05 ` Andy Walls
2010-03-15 2:48 ` cx18: "missing audio" for analog recordings Mark Lord
2010-03-15 11:51 ` Andy Walls
2010-03-16 4:49 ` Mark Lord
2010-03-16 11:11 ` Andy Walls
2010-04-10 22:28 ` Mark Lord
2010-04-10 22:54 ` Andy Walls
2010-04-11 0:58 ` Andy Walls
2010-04-11 3:21 ` Mark Lord
2010-04-11 4:56 ` Andy Walls
2010-04-11 5:03 ` [ivtv-devel] " Andy Walls
2010-04-11 11:47 ` Andy Walls
2010-04-11 13:24 ` Mark Lord
2010-04-11 19:01 ` Andy Walls
2010-04-11 20:52 ` Mark Lord
2010-04-12 20:08 ` Mark Lord
2010-04-12 21:17 ` Andy Walls
2010-04-13 2:22 ` Mark Lord
2010-04-13 2:30 ` Mark Lord
2010-04-13 2:34 ` Mark Lord
2010-04-13 10:35 ` Andy Walls
2010-04-13 12:42 ` Mark Lord
2010-04-14 1:45 ` Andy Walls
2010-04-14 4:32 ` Mark Lord
2010-04-14 4:34 ` Mark Lord [this message]
2010-04-14 22:26 ` Mark Lord
2010-04-15 4:46 ` Andy Walls
2010-04-15 5:16 ` Mark Lord
2010-04-15 14:15 ` Mark Lord
2010-04-17 4:43 ` Andy Walls
2010-04-17 12:09 ` Mark Lord
2010-04-17 13:01 ` Mark Lord
2010-04-17 17:18 ` Andy Walls
2010-04-17 17:03 ` Andy Walls
2010-04-16 12:59 ` Andy Walls
2010-04-17 12:18 ` Mark Lord
2010-04-17 17:37 ` Andy Walls
2010-04-16 13:15 ` Andy Walls
2010-04-16 13:29 ` Andy Walls
2010-04-11 19:49 ` Darren Blaber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BC545C0.4030506@pobox.com \
--to=mlord@pobox.com \
--cc=awalls@md.metrocast.net \
--cc=dmbtech@gmail.com \
--cc=hverkuil@xs4all.nl \
--cc=ivtv-devel@ivtvdriver.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox