Am 14.04.2010 23:06, schrieb Mauro Carvalho Chehab:
> Em 14-04-2010 11:41, Stefan Ringel escreveu:
>   
>> Am 14.04.2010 19:44, schrieb Mauro Carvalho Chehab:
>>     
>>> Hi Stefan,
>>>
>>> Em 14-04-2010 09:26, Stefan Ringel escreveu:
>>>   
>>>       
>>>> Hi Mauro,
>>>>
>>>> Can you added these three firmwares? The third is into archive file,
>>>> because I'm extracted for an user (Bee Hock Goh).
>>>>     
>>>>         
>>> Sorry, but for us to put the firmwares at the server and/or add them at linux-firmware 
>>> git tree, we need to get the distribution rights from the manufacturer,
>>> as described on:
>>> 	http://linuxtv.org/wiki/index.php/Development:_How_to_submit_patches#Firmware_submission
>>>
>>> So, we need Xceive's ack, in order to add the firmware files somewhere. That's why
>>> currently we're using the procedure described on the comments at the extraction
>>> tool:
>>> 	Documentation/video4linux/extract_xc3028.pl  
>>>
>>> Cheers,
>>> Mauro
>>>   
>>>       
>> OK. In the archive is the modified extract_xc3028 tool for
>> tm6000-xc3028.fw . Is that useful?
>>     
> Yes, but:
>
> 1) Please, send it as a patch, with the proper SOB;
>
> 2) From a diff I did here:
>
> -       my $sourcefile = "UDXTTM6000.sys";
> -       my $hash = "cb9deb5508a5e150af2880f5b0066d78";
> -       my $outfile = "tm6000-xc3028.fw";
> +       my $sourcefile = "hcw85bda.sys";
> +       my $hash = "0e44dbf63bb0169d57446aec21881ff2";
> +       my $outfile = "xc3028-v27.fw";
>
> This version works with another *.sys file. The proper way is to
> check for the hash, and use the proper logic, based on the provided
> sys file;
>
> 3) Please document where to get the UDXTTTM6000.sys file at the 
> comments;
>
> 4) tm6000-xc3028.fw is a really bad name. It made sense only during
> the development of tuner-xc2028.c, since, on that time, it seemed that
> tm6000 had a different firmware version. In fact, the first devices
> appeared with v 1.e firmware. So, a proper name for that version
> would be xc3028-v1e.fw. We should rename it to be consistent.
>
>   
The firmware name is was you write in tm6000-card.c file and yes it can
renamed. This firmware work in tm5600 and tm6000 sticks where the
firmware v2.7 or v3.6 not works. The version isn't v1.e , it is v2.4 see
log file from Bee Hock Goh (
http://www.mail-archive.com/linux-media@vger.kernel.org/msg17378.html ).
> It is not clear what version is provided with this version. Is it
> v3.6? On a few cases, we've seen some modified versions of XC3028 firmwares
> shipped with some specific board. Is it the case?
>
>
> Cheers,
> Mauro
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>   


-- 
Stefan Ringel <stefan.ringel@arcor.de>