public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
* Issue loading SAA7134 module
@ 2010-04-21 16:22 Donald Bailey
  2010-04-22  1:57 ` hermann pitton
  0 siblings, 1 reply; 4+ messages in thread
From: Donald Bailey @ 2010-04-21 16:22 UTC (permalink / raw)
  To: linux-media

I've got a couple of boxes that have two no-name 8-chip SAA713X cards.  
Both have the same issue: the kernel will only set up the first eight on 
one board and only two on the second.  It leaves the other six unusable 
with error -23.  I am unable to figure out what that means.

Sample dmesg as follows.  More (/proc/ioports, /proc/interrupts, etc) 
can be posted if requested.  Tried kernels 2.6.18 and 2.6.33.2 on CentOS 
5.4 and Fedora 11 fully updated. The module is loaded as card=0. The 
following is output for chips 11 through 16.

saa7130[10]: subsystem: 1131:0000, board: UNKNOWN/GENERIC 
[card=0,autodetected]
saa7130[10]: board init: gpio is 10000
saa7130[10]: Huh, no eeprom present (err=-5)?
saa7130[10]: can't register video device
saa7134: probe of 0000:05:0f.0 failed with error -23

Thanks in advance,

Donald Bailey

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2010-04-23 22:28 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-21 16:22 Issue loading SAA7134 module Donald Bailey
2010-04-22  1:57 ` hermann pitton
     [not found]   ` <4BD0320B.2080009@apple2pl.us>
     [not found]     ` <1271974292.11222.23.camel@pc07.localdom.local>
2010-04-22 23:11       ` Donnie Bailey
2010-04-23 22:25         ` hermann pitton

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox