From: william <kc@cobradevil.org>
To: linux-media@vger.kernel.org
Cc: liplianin@me.by
Subject: Re: debugging my Tevii S660 usb 2.0 dvb-s2 device
Date: Thu, 29 Apr 2010 20:33:56 +0200 [thread overview]
Message-ID: <4BD9D114.6010308@cobradevil.org> (raw)
In-Reply-To: <4BD87EA2.5090700@cobradevil.org>
Hi all and Igor,
i only showed information with the drivers from tevii but then i looked
again at the source from the hg v4l repo and there was support for my s660.
So sorry i asked questions about the drivers from tevii itself.
But now the following:
[ 45.654362] dvb-usb: found a 'TeVii S660 USB' in cold state, will try
to load a firmware
[ 45.654379] usb 1-3: firmware: requesting dvb-usb-s630.fw
[ 45.717438] dvb-usb: downloading firmware from file 'dvb-usb-s630.fw'
[ 45.717450] dw2102: start downloading DW210X firmware
[ 45.824245] usb 1-3: USB disconnect, address 3
[ 45.930055] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 45.930167] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 45.930233] DVB: registering new adapter (TeVii S660 USB)
[ 56.182533] dvb-usb: MAC address: 00:00:00:00:00:00
[ 56.262532] mt312: R(126): 00
[ 56.262543] Only Zarlink VP310/MT312/ZL10313 are supported chips.
[ 56.607024] ds3000_attach
[ 56.642535] ds3000_readreg: read reg 0x00, value 0x00
[ 56.642542] Invalid probe, probably not a DS3000
[ 56.642816] dvb-usb: no frontend was attached by 'TeVii S660 USB'
[ 56.643037] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input5
[ 56.643189] dvb-usb: schedule remote query interval to 150 msecs.
[ 56.643203] dvb-usb: TeVii S660 USB successfully initialized and
connected.
[ 56.643290] usbcore: registered new interface driver dw2102
[ 56.773230] dvb-usb: TeVii S660 USB successfully deinitialized and
disconnected.
[ 57.050043] usb 1-3: new high speed USB device using ehci_hcd and
address 5
in my previous post i got a message that an mt312 chip was found and now
it does not find anything.
so now i don't have a dvb device at all.
the firmware is from the drivers from tevii. I tried and the s630
firmware and later the s660 firmware renamed to s630 but none worked.
After installing the driver/changing the firmware, I shutdown the
computer removed the power from the tevii device and then replugged and
started my computer again.
Igor or someone else do you have an idea what is happening?
With kind regards
William van de Velde
prev parent reply other threads:[~2010-04-30 19:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-28 14:47 debugging my Tevii S660 usb 2.0 dvb-s2 device kc
2010-04-28 18:29 ` william
2010-04-29 18:33 ` william [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BD9D114.6010308@cobradevil.org \
--to=kc@cobradevil.org \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox