From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: vadim.catana@gmail.com
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH] TechnoTrend TT-budget T-3000
Date: Tue, 25 May 2010 13:07:03 -0300 [thread overview]
Message-ID: <4BFBF5A7.6070703@redhat.com> (raw)
In-Reply-To: <1273172404.2154.26.camel@xxx>
Vadim Catana wrote:
> Hi,
>
> This patch adds support for TechnoTrend TT-budget T-3000
> DVB-T card.
Please send your Signed-off-by together with the patch. Also,
send just one copy of the patch, not line-wrapped, otherwise, it
will fail when trying to apply on my tree.
Cheers,
Mauro.
>
>
>
> diff -r ee9826bc7106 linux/drivers/media/video/saa7134/saa7134-cards.c
> --- a/linux/drivers/media/video/saa7134/saa7134-cards.c Thu Apr 29
> 23:31:06 2010 -0300
> +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Thu May 06
> 21:33:14 2010 +0300
> @@ -5411,6 +5411,30 @@
> .gpio = 0x01fc00,
> } },
> },
> + [SAA7134_BOARD_TECHNOTREND_BUDGET_T3000] = {
> + .name = "TechoTrend TT-budget T-3000",
> + .tuner_type = TUNER_PHILIPS_TD1316,
> + .audio_clock = 0x00187de7,
> + .radio_type = UNSET,
> + .tuner_addr = 0x63,
> + .radio_addr = ADDR_UNSET,
> + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
> + .mpeg = SAA7134_MPEG_DVB,
> + .inputs = {{
> + .name = name_tv,
> + .vmux = 3,
> + .amux = TV,
> + .tv = 1,
> + }, {
> + .name = name_comp1,
> + .vmux = 0,
> + .amux = LINE2,
> + }, {
> + .name = name_svideo,
> + .vmux = 8,
> + .amux = LINE2,
> + } },
> + },
>
> };
>
> @@ -6568,6 +6592,12 @@
> .subdevice = 0x6655,
> .driver_data = SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S,
> }, {
> + .vendor = PCI_VENDOR_ID_PHILIPS,
> + .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
> + .subvendor = 0x13c2,
> + .subdevice = 0x2804,
> + .driver_data = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000,
> + }, {
> /* --- boards without eeprom + subsystem ID --- */
> .vendor = PCI_VENDOR_ID_PHILIPS,
> .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
> @@ -7277,6 +7307,7 @@
> case SAA7134_BOARD_VIDEOMATE_DVBT_300:
> case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
> case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
> + case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
> {
>
> /* The Philips EUROPA based hybrid boards have the tuner
> diff -r ee9826bc7106 linux/drivers/media/video/saa7134/saa7134-dvb.c
> --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Thu Apr 29
> 23:31:06 2010 -0300
> +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Thu May 06
> 21:33:14 2010 +0300
> @@ -482,6 +482,18 @@
> .request_firmware = philips_tda1004x_request_firmware
> };
>
> +static struct tda1004x_config technotrend_budget_t3000_config = {
> + .demod_address = 0x8,
> + .invert = 1,
> + .invert_oclk = 0,
> + .xtal_freq = TDA10046_XTAL_4M,
> + .agc_config = TDA10046_AGC_DEFAULT,
> + .if_freq = TDA10046_FREQ_3617,
> + .tuner_address = 0x63,
> + .request_firmware = philips_tda1004x_request_firmware
> +};
> +
> +
> /* ------------------------------------------------------------------
> * tda 1004x based cards with philips silicon tuner
> */
> @@ -1169,6 +1181,18 @@
> fe0->dvb.frontend->ops.tuner_ops.set_params =
> philips_td1316_tuner_set_params;
> }
> break;
> + case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
> + fe0->dvb.frontend = dvb_attach(tda10046_attach,
> + &technotrend_budget_t3000_config,
> + &dev->i2c_adap);
> + if (fe0->dvb.frontend) {
> + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
> + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
> + fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
> + fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
> + fe0->dvb.frontend->ops.tuner_ops.set_params =
> philips_td1316_tuner_set_params;
> + }
> + break;
> case SAA7134_BOARD_VIDEOMATE_DVBT_200:
> fe0->dvb.frontend = dvb_attach(tda10046_attach,
> &philips_tu1216_61_config,
> diff -r ee9826bc7106 linux/drivers/media/video/saa7134/saa7134.h
> --- a/linux/drivers/media/video/saa7134/saa7134.h Thu Apr 29 23:31:06
> 2010 -0300
> +++ b/linux/drivers/media/video/saa7134/saa7134.h Thu May 06 21:33:14
> 2010 +0300
> @@ -302,6 +302,7 @@
> #define SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S 175
> #define SAA7134_BOARD_BEHOLD_505RDS_MK3 176
> #define SAA7134_BOARD_HAWELL_HW_404M7 177
> +#define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 178
>
> #define SAA7134_MAXBOARDS 32
> #define SAA7134_INPUT_MAX 8
>
>
>
> Signed-off-by: Vadim Catana <vadim.catana@gmail.com>
>
>
> Best regards,
> Vadim Catana
>
>
>
--
Cheers,
Mauro
next prev parent reply other threads:[~2010-05-25 16:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-06 19:00 [PATCH] TechnoTrend TT-budget T-3000 Vadim Catana
2010-05-25 16:07 ` Mauro Carvalho Chehab [this message]
2010-05-29 15:49 ` Vadim Catana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BFBF5A7.6070703@redhat.com \
--to=mchehab@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=vadim.catana@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).